slickmic Posted December 11, 2009 Posted December 11, 2009 I need help burning xbox 360 games. So I have img burn, and I was using memorex dvd + r dls before, I got a 5 pack and they all ended up as coasters. The most I got to was 18% before I got an I/O error that says check condition. Anyways, today I went out and bought 20 verbatim dvd+ dls for 30 bucks. I tried to burn one using img burn but only got to 32% before the I/O error. If somebody could please help me that would be appreciated. Here is the log: I 14:30:41 ImgBurn Version 2.5.0.0 started! I 14:30:41 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 14:30:41 Total Physical Memory: 2,879,912 KB - Available: 954,244 KB I 14:30:41 Initialising SPTI... I 14:30:41 Searching for SCSI / ATAPI devices... I 14:30:41 Found 1 DVD±RW/RAM! I 14:33:59 Operation Started! I 14:33:59 Source File: C:\Users\Slickmic\Desktop\kfc-sc4.dvd I 14:33:59 Source File Sectors: 3,825,924 (MODE1/2048) I 14:33:59 Source File Size: 7,835,492,352 bytes I 14:33:59 Source File Volume Identifier: XGD2DVD_NTSC I 14:33:59 Source File Volume Set Identifier: 34672923 I 14:33:59 Source File Implementation Identifier: Sonic Scenarist 3.1 I 14:33:59 Source File File System(s): ISO9660, UDF (1.02) I 14:33:59 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50L SC04 (E:) (ATA) I 14:33:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 14:33:59 Destination Media Sectors: 4,173,824 I 14:33:59 Write Mode: DVD I 14:33:59 Write Type: DAO I 14:33:59 Write Speed: 2.4x I 14:33:59 Link Size: Auto I 14:33:59 Lock Volume: Yes I 14:33:59 Test Mode: No I 14:33:59 OPC: No I 14:33:59 BURN-Proof: Enabled I 14:33:59 Book Type Setting: N/A I 14:33:59 User Specified L0 Data Zone Capacity: 1,913,760 I 14:35:05 Set L0 Data Zone Capacity Succeeded! I 14:35:06 Filling Buffer... (40 MB) I 14:35:07 Writing LeadIn... I 14:35:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 14:35:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 14:35:12 Writing Layer 0... (LBA: 0 - 1913759) W 14:48:01 Failed to Write Sectors 1228960 - 1228991 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) W 14:48:01 Retrying (1 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (2 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (3 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (4 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (5 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (6 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (7 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (8 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (9 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (10 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (11 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (12 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (13 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (14 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (15 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (16 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (17 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (18 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (19 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (20 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:08 Retrying (21)... W 14:48:08 Retry Failed - Reason: Invalid Address For Write W 14:48:17 Retrying (22)... W 14:48:17 Retry Failed - Reason: Invalid Address For Write W 14:50:11 Retrying (23)... W 14:50:11 Retry Failed - Reason: Invalid Address For Write W 14:50:25 Retrying (24)... W 14:50:25 Retry Failed - Reason: Invalid Address For Write E 14:53:26 Failed to Write Sectors 1228960 - 1228991 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) E 14:53:26 Next Writable Address: 1228432 I 14:53:26 Synchronising Cache... W 14:53:31 User opted to skip the 'Close Track/Session/Disc' functions. E 14:53:32 Failed to Write Image! I 14:53:32 Exporting Graph Data... I 14:53:32 Graph Data File: C:\Users\Slickmic\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50L_SC04_FRIDAY-DECEMBER-11-2009_2-33_PM_MKM-001-00_2.4x.ibg I 14:53:32 Export Successfully Completed! E 14:53:32 Operation Failed! - Duration: 00:19:32 I 14:53:32 Average Write Rate: 2,246 KB/s (1.6x) - Maximum Write Rate: 3,381 KB/s (2.4x)
mmalves Posted December 11, 2009 Posted December 11, 2009 Try burning at 4x, and if that doesn't work, then use a lens cleaning disc on that burner. You can also manually cleans the burner's lens with a cotton bud and some isopropyl alcohol, but be careful not to force it.
slickmic Posted December 11, 2009 Author Posted December 11, 2009 Try burning at 4x, and if that doesn't work, then use a lens cleaning disc on that burner. You can also manually cleans the burner's lens with a cotton bud and some isopropyl alcohol, but be careful not to force it. the verbatim disks i have say 2.4x, should I still try 4x?
Cynthia Posted December 12, 2009 Posted December 12, 2009 The drive supports these speeds: I 14:33:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) So, yes.
slickmic Posted December 12, 2009 Author Posted December 12, 2009 The drive supports these speeds: I 14:33:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) So, yes. Okay so I was able to burn the disc to 100% at 4x, however there was a problem finalizing the disc. My tray popped open and it told me to manually shut it and then press okay, I did and nothing happened, at the bottom of imgburn it said disc not empty. What's the problem?
slickmic Posted December 12, 2009 Author Posted December 12, 2009 The drive supports these speeds: I 14:33:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) So, yes. Okay so I was able to burn the disc to 100% at 4x, however there was a problem finalizing the disc. My tray popped open and it told me to manually shut it and then press okay, I did and nothing happened, at the bottom of imgburn it said disc not empty. What's the problem? I 15:58:14 ImgBurn Version 2.5.0.0 started! I 15:58:14 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 15:58:14 Total Physical Memory: 2,879,912 KB - Available: 1,934,048 KB I 15:58:14 Initialising SPTI... I 15:58:14 Searching for SCSI / ATAPI devices... I 15:58:14 Found 1 DVD±RW/RAM! W 15:58:36 Device Arrival Detected! I 15:58:36 Searching for SCSI / ATAPI devices... I 15:58:37 Found 1 DVD±RW/RAM! I 16:02:40 Operation Started! I 16:02:40 Source File: C:\Users\Slickmic\Desktop\kfc-sc4.dvd I 16:02:40 Source File Sectors: 3,825,924 (MODE1/2048) I 16:02:40 Source File Size: 7,835,492,352 bytes I 16:02:40 Source File Volume Identifier: XGD2DVD_NTSC I 16:02:40 Source File Volume Set Identifier: 34672923 I 16:02:40 Source File Implementation Identifier: Sonic Scenarist 3.1 I 16:02:40 Source File File System(s): ISO9660, UDF (1.02) I 16:02:40 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50L SC05 (E:) (ATA) I 16:02:40 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 16:02:40 Destination Media Sectors: 4,173,824 I 16:02:40 Write Mode: DVD I 16:02:40 Write Type: DAO I 16:02:40 Write Speed: 4x I 16:02:40 Link Size: Auto I 16:02:40 Lock Volume: Yes I 16:02:40 Test Mode: No I 16:02:40 OPC: No I 16:02:40 BURN-Proof: Enabled I 16:02:40 Book Type Setting: N/A I 16:02:40 User Specified L0 Data Zone Capacity: 1,913,760 E 16:04:57 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure E 16:04:57 Operation Failed! - Duration: 00:02:17 I 16:04:57 Average Write Rate: N/A - Maximum Write Rate: N/A I 16:06:59 Operation Started! I 16:06:59 Source File: C:\Users\Slickmic\Desktop\kfc-sc4.dvd I 16:06:59 Source File Sectors: 3,825,924 (MODE1/2048) I 16:06:59 Source File Size: 7,835,492,352 bytes I 16:06:59 Source File Volume Identifier: XGD2DVD_NTSC I 16:06:59 Source File Volume Set Identifier: 34672923 I 16:06:59 Source File Implementation Identifier: Sonic Scenarist 3.1 I 16:06:59 Source File File System(s): ISO9660, UDF (1.02) I 16:06:59 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50L SC05 (E:) (ATA) I 16:06:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 16:06:59 Destination Media Sectors: 4,173,824 I 16:06:59 Write Mode: DVD I 16:06:59 Write Type: DAO I 16:06:59 Write Speed: 4x I 16:06:59 Link Size: Auto I 16:06:59 Lock Volume: Yes I 16:06:59 Test Mode: No I 16:06:59 OPC: No I 16:06:59 BURN-Proof: Enabled I 16:06:59 Book Type Setting: N/A I 16:06:59 User Specified L0 Data Zone Capacity: 1,913,760 I 16:08:00 Set L0 Data Zone Capacity Succeeded! I 16:08:00 Filling Buffer... (40 MB) I 16:08:01 Writing LeadIn... I 16:08:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 16:08:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 16:08:09 Writing Layer 0... (LBA: 0 - 1913759) I 16:20:53 Writing Layer 1... (LBA: 1913760 - 3825923) I 16:33:40 Synchronising Cache... I 16:33:42 Closing Track... I 16:34:03 Finalising Disc... W 16:34:18 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Write Error W 16:34:18 Finalise Disc Failed! - Reason: Write Error W 16:34:18 Retrying (1 of 3)... W 16:34:34 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Write Error W 16:34:34 Retry Failed - Reason: Write Error W 16:34:34 Retrying (2 of 3)... W 16:35:13 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 16:35:13 Retry Failed - Reason: Program Memory Area Update Failure W 16:35:13 Retrying (3 of 3)... I 16:35:14 Exporting Graph Data... I 16:35:14 Graph Data File: C:\Users\Slickmic\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50L_SC05_FRIDAY-DECEMBER-11-2009_4-06_PM_MKM-001-00_4x.ibg I 16:35:14 Export Successfully Completed! I 16:35:14 Operation Successfully Completed! - Duration: 00:28:14 I 16:35:14 Average Write Rate: 4,997 KB/s (3.6x) - Maximum Write Rate: 5,693 KB/s (4.1x) I 16:35:14 Cycling Tray before Verify... W 16:36:06 Waiting for device to become ready... I 16:36:41 Device Ready! I 16:36:53 Operation Started! I 16:36:53 Source Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50L SC05 (E:) (ATA) I 16:36:53 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 16:36:53 Image File: C:\Users\Slickmic\Desktop\kfc-sc4.dvd I 16:36:53 Image File Sectors: 3,825,924 (MODE1/2048) I 16:36:53 Image File Size: 7,835,492,352 bytes I 16:36:53 Image File Volume Identifier: XGD2DVD_NTSC I 16:36:53 Image File Volume Set Identifier: 34672923 I 16:36:53 Image File Implementation Identifier: Sonic Scenarist 3.1 I 16:36:53 Image File File System(s): ISO9660, UDF (1.02) I 16:36:53 Read Speed (Data/Audio): MAX / MAX E 16:36:53 Session 1, Track 1 is smaller on the disc than it is in the image file. E 16:36:53 Disc's Track Sectors: 0 (TOC Sectors: 0) E 16:36:53 Image File's Track Sectors: 3825924 (TOC Sectors: 3825924) E 16:36:53 Operation Failed! - Duration: 00:00:00 I 16:36:53 Average Verify Rate: N/A - Maximum Verify Rate: N/A
mmalves Posted December 12, 2009 Posted December 12, 2009 Cleaning the lens is your only option then.
slickmic Posted December 12, 2009 Author Posted December 12, 2009 Cleaning the lens is your only option then. I don't see how it's the lens when it burned all the way to 100%. The error happened at the finalizing stage. My disc tray popped out, it said it couldn't close tray which is understandable because I'm using a laptop so it asked me to manually push it back in and when I did nothing happened.
slickmic Posted December 12, 2009 Author Posted December 12, 2009 Okay so it worked. Here is what I did. I burned it at 4x, after it ejected I pushed it back in, I went to tools-drive-close-disc
Recommended Posts