branky Posted December 13, 2009 Posted December 13, 2009 (edited) Hallo evrybody i got the same problem expressed in this topic: http://forum.imgburn.com/index.php?showtopic=7739 Me too i wanted to mount the Iso image with alcohol 120% and reading it with Power DVD9, but even following the suggestion to remount the iso via file .mds doesn't give any solution for me, and the player see it always as unsupported file format! in the read mode of imgburn the iso appear like this: PW4012N SCR407O 2.0B (SCSI) Current Profile: DVD-ROM Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 7.458.848 Size: 15.275.720.704 bytes Time: 1657:33:23 (MM:SS:FF) File System Information: Sectors: 7.458.848 Size: 15.275.720.704 bytes Time: 1657:33:23 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 7458847) -> LeadOut (LBA: 7458848) Track Information: Session 1... -> Track 01 (LTSA: 0, TS: 7458848, LRA: 0) Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 7.655.455 Last Physical Sector in Layer 0: 0 AND THIS IS THE LOG OF THE ISO I PREVIOUSLY CREATED: //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; domenica, 13 dicembre 2009, 01.03.43 ; \\****************************************// ; ; I 21:40:19 ImgBurn Version 2.5.0.0 started! I 21:40:19 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 21:40:19 Total Physical Memory: 3.143.164 KB - Available: 1.909.332 KB W 21:40:19 SPTD can have a detrimental effect on drive performance. I 21:40:19 Initialising SPTI... I 21:40:19 Searching for SCSI / ATAPI devices... I 21:40:19 Found 1 DVD-ROM and 1 BD-ROM/DVD±RW! I 21:42:20 Operation Started! I 21:42:20 Building Image Tree... I 21:42:20 Calculating Totals... I 21:42:20 Preparing Image... I 21:42:20 Contents: 420 Files, 16 Folders I 21:42:20 Content Type: BD Video I 21:42:20 Data Type: MODE1/2048 I 21:42:20 File System(s): UDF (2.50) I 21:42:20 Volume Label: Blu Elements I 21:42:20 Size: 15.272.484.650 bytes I 21:42:20 Sectors: 7.457.509 I 21:42:20 Image Size: 15.275.720.704 bytes I 21:42:20 Image Sectors: 7.458.848 I 21:42:30 Operation Successfully Completed! - Duration: 00:00:10 I 21:42:30 Operation Started! I 21:42:30 Image Contents: 420 Files, 16 Folders I 21:42:30 Image Sectors: 7.458.848 (MODE1/2048) I 21:42:30 Image Size: 15.275.720.704 bytes I 21:42:30 Image Volume Identifier: Blu Elements I 21:42:30 Image Volume Set Identifier: 3B8CAD490071CE05 I 21:42:30 Image Application Identifier: ImgBurn v2.5.0.0 I 21:42:30 Image Implementation Identifier: ImgBurn I 21:42:30 Image File System(s): UDF (2.50) I 21:42:30 Destination File: G:\Blu Elements.iso I 21:42:30 Destination Free Space: 28.804.087.808 Bytes (28.128.992 KB) (27.469 MB) (26 GB) I 21:42:30 Destination File System: NTFS I 21:42:30 File Splitting: Auto I 21:42:30 Writing Image... I 22:42:36 Operation Successfully Completed! - Duration: 01:00:06 I 22:42:36 Average Write Rate: 4.136 KB/s (0.9x) - Maximum Write Rate: 42.866 KB/s (9.5x) I 01:03:42 Close Request Acknowledged Thx in advance, i hope to find a solution 'cause this issue is driving me Crazy! Edited December 13, 2009 by branky
mmalves Posted December 13, 2009 Posted December 13, 2009 Wasn't a .mds file created? I think you need to mount that one so that it emulates a BD-ROM disc rather than a DVD-ROM disc like it's doing now. You can manually create a .mds/.dvd file for your ISO image with the appropriate options in ImgBurn's Tools menu if you want to test them.
branky Posted December 13, 2009 Author Posted December 13, 2009 (edited) Wasn't a .mds file created? I think you need to mount that one so that it emulates a BD-ROM disc rather than a DVD-ROM disc like it's doing now. You can manually create a .mds/.dvd file for your ISO image with the appropriate options in ImgBurn's Tools menu if you want to test them. Yes i did it and when i mout it in the dirtual device(Alcohol120%), trought windows explore is recognized as a BD, the problem i that is always read as disk with unsupported file format. While creating Iso in Imgburn i moved the following 2 folders: BDMV CERTIFICATE SUB Folders in the BDMV Directory AUXDATA BACKUP BDJO CLIPINF JAR META PLAYLIST STREAM SUB Folders in the BDMV > BACKUP Directory BDJO CLIPINF PLAYLIST It is the right folder structure? If I navigate to STREAM folder directly and select a .m2ts file to play back - that works fine but with no audio. :& I think I must be missing something obvious. I would be grateful for any help with this. Edited December 13, 2009 by branky
LIGHTNING UK! Posted December 13, 2009 Posted December 13, 2009 When you mount the MDS (that ImgBurn v2.5.0.0 created) it should see it as a DVD-R disc and it should play. Mounting just the ISO will make it look like a BD disc but PowerDVD won't play from a BD-ROM - so if that's what your version of Alcohol is emulating, that's why it won't work. Use Virtual CloneDrive instead (or perhaps an updated version of Alcohol / DAEMON Tools).
branky Posted December 13, 2009 Author Posted December 13, 2009 When you mount the MDS (that ImgBurn v2.5.0.0 created) it should see it as a DVD-R disc and it should play. Mounting just the ISO will make it look like a BD disc but PowerDVD won't play from a BD-ROM - so if that's what your version of Alcohol is emulating, that's why it won't work. Use Virtual CloneDrive instead (or perhaps an updated version of Alcohol / DAEMON Tools). OK i will try to do the whole process again (creating an .ISO and an .mds) but then mounting on CloneDrive.. i let u know guys (!) ...in the meanwhile i solved the problem installinn Arcsoft TMT3 that let me read the BD from folder thx a lot!
Recommended Posts