shungames Posted December 13, 2009 Posted December 13, 2009 (edited) Hello, I have recently got some disks which I am planning to put Wii Isos on but the disks need to be DVD-R of DVD-RW. It is a samsung drive but there is this error: (Tab Samsung) Change for: Drive (For DVD+RW Media) Current Setting: UNKNOWN (FAILED!) Reason: Invalid Field in CDB. I have had the same problem with just DVD+R. Does anyone know what the problem is? Information is here: TSSTcorp DVD+-RW TS-L632H D400 (ATA) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: Yes Sessions: 1 Sectors: 2,295,104 Size: 4,700,372,992 bytes Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 3x, 4x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2295103) -> LeadOut (LBA: 2295104) Physical Format Information (ADIP): Disc ID: MBIPG101-W04-00 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: MBIPG101-W04-00 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Format Capacities: DT: 0x02 - NB: 2295104 (0x00230540) - TDP: 2048 FT: 0x26 - NB: 2295104 (0x00230540) - TDP: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 8,310 KB/s (6x) - WS: 4,155 KB/s (3x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 2295103 (0x0023053F) -> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x) Thanks in Advance. Edited December 13, 2009 by shungames
mmalves Posted December 13, 2009 Posted December 13, 2009 TSSTcorp DVD+-RW TS-L632H D400 (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. If it doesn't work then it could be that your burner doesn't support booktyping DVD+RW media, but it may be able to booktype DVD+R media.
shungames Posted December 13, 2009 Author Posted December 13, 2009 TSSTcorp DVD+-RW TS-L632H D400 (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. If it doesn't work then it could be that your burner doesn't support booktyping DVD+RW media, but it may be able to booktype DVD+R media. I have updated it but still the same error. I will have to try it on a differnet computer. Thank You anyway.
Recommended Posts