Samsung Booktype Error?!

[shungames]

Hello, I have recently got some disks which I am planning to put Wii Isos on but the disks need to be DVD-R of DVD-RW.

 

It is a samsung drive but there is this error:

(Tab Samsung)

 

Change for: Drive (For DVD+RW Media)

 

Current Setting: UNKNOWN (FAILED!)

Reason: Invalid Field in CDB.

 

 

I have had the same problem with just DVD+R.

 

Does anyone know what the problem is?

 

Information is here:

 

TSSTcorp DVD+-RW TS-L632H D400 (ATA)

Current Profile: DVD+RW

 

Disc Information:

Status: Complete

Erasable: Yes

Formatted: Yes

Sessions: 1

Sectors: 2,295,104

Size: 4,700,372,992 bytes

Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 3x, 4x

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 2295103)

-> LeadOut (LBA: 2295104)

 

Physical Format Information (ADIP):

Disc ID: MBIPG101-W04-00

Book Type: DVD+RW

Part Version: 2

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MBIPG101-W04-00

Book Type: DVD+RW

Part Version: 2

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Format Capacities:

DT: 0x02 - NB: 2295104 (0x00230540) - TDP: 2048

FT: 0x26 - NB: 2295104 (0x00230540) - TDP: 0

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 8,310 KB/s (6x) - WS: 4,155 KB/s (3x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x)

 

Thanks in Advance.

Edited December 13, 2009 by shungames

[mmalves]

TSSTcorp DVD+-RW TS-L632H D400 (ATA)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again.

 

If it doesn't work then it could be that your burner doesn't support booktyping DVD+RW media, but it may be able to booktype DVD+R media.

[shungames]

TSSTcorp DVD+-RW TS-L632H D400 (ATA)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again.

 

If it doesn't work then it could be that your burner doesn't support booktyping DVD+RW media, but it may be able to booktype DVD+R media.

 

I have updated it but still the same error. I will have to try it on a differnet computer. Thank You anyway.