bradkraft Posted December 15, 2009 Posted December 15, 2009 I know this is probably covered a couple times, however I could not remember where I read it, nor could I find it again. So any help would be greatly appreciated. I have two questions. One when I place a Verbatim DL +R in my drive it says no medium present. How do I fix this? Second when I use my other discs, Memorex DL +R I can burn until I receive this error message, in the log below. Please help? I 19:05:55 ImgBurn Version 2.5.0.0 started! I 19:05:55 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 19:05:55 Total Physical Memory: 1,046,604 KB - Available: 425,592 KB I 19:05:55 Initialising SPTI... I 19:05:55 Searching for SCSI / ATAPI devices... I 19:05:55 Found 1 DVD±RW! I 19:09:03 Operation Started! I 19:09:03 Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H21N A105 (D:) (ATA) I 19:09:03 Media Type: DVD+RW I 19:09:03 Quick Erase: No I 19:09:03 Format Properly: Yes I 19:09:03 Format Size: Preferred I 19:09:03 Erasing Disc... E 19:09:07 Failed to Erase Disc! - Reason: Medium Not Present E 19:09:07 Operation Failed! - Duration: 00:00:03 I 19:12:36 Operation Started! I 19:12:36 Source File: C:\Documents and Settings\Brad\My Documents\Games\Assasins Creed 2\alw-ac2.dvd I 19:12:36 Source File Sectors: 3,827,488 (MODE1/2048) I 19:12:36 Source File Size: 7,838,695,424 bytes I 19:12:36 Source File Volume Identifier: DVD_ROM I 19:12:36 Source File Volume Set Identifier: fd244000MS UDFBridge I 19:12:36 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:12:36 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:12:36 Source File File System(s): ISO9660, UDF (1.50) I 19:12:36 Destination Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H21N A105 (D:) (ATA) I 19:12:36 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x) I 19:12:36 Destination Media Sectors: 4,173,824 I 19:12:36 Write Mode: DVD I 19:12:36 Write Type: DAO I 19:12:36 Write Speed: 4x I 19:12:36 Link Size: Auto I 19:12:36 Lock Volume: Yes I 19:12:36 Test Mode: No I 19:12:36 OPC: No I 19:12:36 BURN-Proof: Enabled I 19:12:36 Book Type Setting: N/A I 19:12:36 User Specified L0 Data Zone Capacity: 1,913,760 I 19:12:36 Set L0 Data Zone Capacity Succeeded! I 19:12:37 Filling Buffer... (40 MB) I 19:12:37 Writing LeadIn... I 19:13:04 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:13:04 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:13:04 Writing Layer 0... (LBA: 0 - 1913759) I 19:25:32 Writing Layer 1... (LBA: 1913760 - 3827487) W 19:30:19 Failed to Write Sectors 2670272 - 2670303 - Reason: Spindle Servo Failure W 19:30:19 Retrying (1 of 20)... W 19:30:19 Retry Failed - Reason: No Seek Complete W 19:30:19 Retrying (2 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (3 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (4 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (5 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (6 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (7 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (8 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (9 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (10 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (11 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (12 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (13 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (14 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (15 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (16 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (17 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (18 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (19 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write W 19:30:19 Retrying (20 of 20)... W 19:30:19 Retry Failed - Reason: Invalid Address For Write E 19:30:49 Failed to Write Sectors 2670272 - 2670303 - Reason: Spindle Servo Failure E 19:30:49 Next Writable Address: 0 I 19:30:49 Synchronising Cache... W 19:30:57 User opted to skip the 'Close Track/Session/Disc' functions. E 19:30:57 Failed to Write Image! I 19:30:57 Exporting Graph Data... I 19:30:57 Graph Data File: C:\Documents and Settings\Brad\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GSA-H21N_A105_DECEMBER-14-2009_7-12_PM_RITEK-S04-66_4x.ibg I 19:30:57 Export Successfully Completed! E 19:30:57 Operation Failed! - Duration: 00:18:20 I 19:30:57 Average Write Rate: 5,014 KB/s (3.6x) - Maximum Write Rate: 5,621 KB/s (4.1x)
mmalves Posted December 15, 2009 Posted December 15, 2009 I 19:09:03 Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H21N A105 (D:) (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again with the Verbatim blanks. If you still get the "medium not present" message then throw that burner in the garbage and treat yourself to a new burner because you won't find better quality blanks than Verbatim.
bradkraft Posted December 15, 2009 Author Posted December 15, 2009 I 19:09:03 Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H21N A105 (D:) (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again with the Verbatim blanks. If you still get the "medium not present" message then throw that burner in the garbage and treat yourself to a new burner because you won't find better quality blanks than Verbatim. Fantastic I will try that, I appreciate you getting back to me.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now