SpitfireS Posted January 1, 2010 Share Posted January 1, 2010 Here's the part of the log that matters: I 21:49:08 Using Layer Break LBA: 2047069 -> 2047072 (VTS_01, PGC: 1, Chapter: 11, Cell: 11, Vob/Cell ID: 1/11, Time: 00:59:56, SPLIP: Yes) I 21:49:11 Optimal L0 Data Zone Capacity: 2.047.072 I 21:49:11 Optimal L0 Data Zone Method: IFO Cell Boundary I 21:49:57 Set L0 Data Zone Capacity Succeeded! I 21:49:57 Filling Buffer... (40 MB) I 21:49:58 Writing LeadIn... I 21:50:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 3905727) I 21:50:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3905727) I 21:50:02 Writing Layer 0... (LBA: 0 - 2047071) I 22:02:32 Writing Layer 1... (LBA: 2047072 - 3905727) W 22:03:20 Failed to Write Sectors 2047680 - 2047711 - Reason: Write Error W 22:03:20 Retrying (1 of 20)... W 22:03:20 Retry Failed - Reason: Invalid Address For Write W 22:03:20 Retrying (20 of 20)... W 22:03:20 Retry Failed - Reason: Invalid Address For Write E 23:37:39 Failed to Write Sectors 2047680 - 2047711 - Reason: Write Error E 23:37:39 Next Writable Address: 2047008 There were 3 small partials (CSI ) on the outer edge. As far as I can tell by the log the second layer was allready being burned so I think the layer break itself wasn't to blame, is that correct? Strange is that the next writable Address is in the first layer. Verbatim MKM-003-00 @ TSSTCorpSH-S222L @ 4x. The next burn of the same file went fine. I have to admit I did change the layer break with VOBblanker (that is open source so OK to mention, right?) Happy New Year. Link to comment Share on other sites More sharing options...
mmalves Posted January 1, 2010 Share Posted January 1, 2010 Yes, if the fingerprint is "greasy"/dirty enough it can interfere with the burn process. And by censoring the log you're limiting how far we can help you, as there's important information in it that we could use to provide you better suggestions. Link to comment Share on other sites More sharing options...
SpitfireS Posted January 1, 2010 Author Share Posted January 1, 2010 Yes, I admit, I should have said : the part of the log I think that matters. Here is the full log. I did edit out the 18 retrying logs. I 21:47:40 ImgBurn Version 2.5.0.0 started! I 21:47:40 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:47:40 Total Physical Memory: 1.048.028 KB - Available: 617.112 KB W 21:47:40 Drive D:\ (FAT) does not support single files > 4 GB in size. W 21:47:40 SPTD can have a detrimental effect on drive performance. I 21:47:40 Initialising SPTI... I 21:47:40 Searching for SCSI / ATAPI devices... I 21:47:40 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 21:47:49 Operation Started! I 21:47:49 Building Image Tree... I 21:47:49 Checking Directory Depth... I 21:47:49 Calculating Totals... I 21:47:49 Preparing Image... I 21:48:01 Using Layer Break LBA: 2047069 -> 2047072 (VTS_01, PGC: 1, Chapter: 11, Cell: 11, Vob/Cell ID: 1/11, Time: 00:59:56, SPLIP: Yes) I 21:48:01 Checking Path Length... I 21:48:01 Contents: 14 Files, 2 Folders I 21:48:01 Content Type: DVD Video I 21:48:01 Data Type: MODE1/2048 I 21:48:01 File System(s): ISO9660, UDF (1.02) I 21:48:01 Volume Label: [Not Configured] I 21:48:01 IFO/BUP 32K Padding: Enabled I 21:48:01 Region Code: 1; 2; 3; 4; 5; 6; 7; 8 I 21:48:01 TV System: NTSC I 21:48:01 Size: 7.998.324.736 bytes I 21:48:01 Sectors: 3.905.432 I 21:48:01 Image Size: 7.998.930.944 bytes I 21:48:01 Image Sectors: 3.905.728 I 21:48:01 Operation Successfully Completed! - Duration: 00:00:12 I 21:49:04 Operation Started! I 21:49:04 Building Image Tree... I 21:49:04 Checking Directory Depth... I 21:49:04 Calculating Totals... I 21:49:04 Preparing Image... I 21:49:08 Using Layer Break LBA: 2047069 -> 2047072 (VTS_01, PGC: 1, Chapter: 11, Cell: 11, Vob/Cell ID: 1/11, Time: 00:59:56, SPLIP: Yes) I 21:49:08 Checking Path Length... I 21:49:08 Contents: 14 Files, 2 Folders I 21:49:08 Content Type: DVD Video I 21:49:08 Data Type: MODE1/2048 I 21:49:08 File System(s): ISO9660, UDF (1.02) I 21:49:08 Volume Label: DVD I 21:49:08 IFO/BUP 32K Padding: Enabled I 21:49:08 Region Code: 1; 2; 3; 4; 5; 6; 7; 8 I 21:49:08 TV System: NTSC I 21:49:08 Size: 7.998.324.736 bytes I 21:49:08 Sectors: 3.905.432 I 21:49:08 Image Size: 7.998.930.944 bytes I 21:49:08 Image Sectors: 3.905.728 I 21:49:11 Operation Successfully Completed! - Duration: 00:00:07 I 21:49:11 Operation Started! I 21:49:11 Source File: -==/\/[bUILD IMAGE]\/\==- I 21:49:11 Source File Sectors: 3.905.728 (MODE1/2048) I 21:49:11 Source File Size: 7.998.930.944 bytes I 21:49:11 Source File Volume Identifier: DVD I 21:49:11 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 21:49:11 Source File Implementation Identifier: ImgBurn I 21:49:11 Source File File System(s): ISO9660; UDF (1.02) I 21:49:11 Destination Device: [1:0:0] TSSTcorp CDDVDW SH-S222L SB02 (X:) (ATAPI) I 21:49:11 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 21:49:11 Destination Media Sectors: 4.173.824 I 21:49:11 Write Mode: DVD I 21:49:11 Write Type: DAO I 21:49:11 Write Speed: 4x I 21:49:11 Link Size: Auto I 21:49:11 Lock Volume: Yes I 21:49:11 Test Mode: No I 21:49:11 OPC: No I 21:49:11 BURN-Proof: Enabled I 21:49:11 Book Type Setting: DVD-ROM I 21:49:11 Optimal L0 Data Zone Capacity: 2.047.072 I 21:49:11 Optimal L0 Data Zone Method: IFO Cell Boundary I 21:49:57 Set L0 Data Zone Capacity Succeeded! I 21:49:57 Filling Buffer... (40 MB) I 21:49:58 Writing LeadIn... I 21:50:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 3905727) I 21:50:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3905727) I 21:50:02 Writing Layer 0... (LBA: 0 - 2047071) I 22:02:32 Writing Layer 1... (LBA: 2047072 - 3905727) W 22:03:20 Failed to Write Sectors 2047680 - 2047711 - Reason: Write Error W 22:03:20 Retrying (1 of 20)... W 22:03:20 Retrying (20 of 20)... W 22:03:20 Retry Failed - Reason: Invalid Address For Write E 23:37:39 Failed to Write Sectors 2047680 - 2047711 - Reason: Write Error E 23:37:39 Next Writable Address: 2047008 I 23:37:39 Synchronising Cache... W 23:37:47 User opted to skip the 'Close Track/Session/Disc' functions. E 23:37:47 Failed to Write Image! I 23:37:47 Exporting Graph Data... I 23:37:47 Graph Data File: C:\Documents and Settings\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S222L_SB02_DONDERDAG-31-DECEMBER-2009_21-49_MKM-003-00_4x.ibg I 23:37:47 Export Successfully Completed! E 23:37:47 Operation Failed! - Duration: 01:48:35 I 23:37:47 Average Write Rate: 634 KB/s (0.5x) - Maximum Write Rate: 5.697 KB/s (4.1x) I 23:38:28 Close Request Acknowledged I 23:38:28 Closing Down... I 23:38:28 Shutting down SPTI... I 23:38:28 ImgBurn closed! The fingerprints were kinda greasy. Thing is, I wrote the file name on the disk before burning (with a soft tip marker) Doing that I must have put the fingerprints on. From now on its straight out of the cake-box into the burner. Lesson learned. Unless the log reveal's a problem. Link to comment Share on other sites More sharing options...
mmalves Posted January 1, 2010 Share Posted January 1, 2010 Nope, all seems good in the log. Link to comment Share on other sites More sharing options...
SpitfireS Posted January 1, 2010 Author Share Posted January 1, 2010 If I may ask: what were you looking for in this log that I didn't post before? Just learning from the experts. Link to comment Share on other sites More sharing options...
mmalves Posted January 1, 2010 Share Posted January 1, 2010 I was looking if the burner has the latest firmware available and if it has correctly recognised the blank disc. Link to comment Share on other sites More sharing options...
Recommended Posts