Writing DVD-Video. Verify ok. Playbak on DVD player ok. Can`t read disk on PC.

[MadMax74]

First scenario step-by-step:

1. Start ImgBurn.

2. Switch to Build mode.

3. Add folder with VIDEO_TS

4. Set Filesystems to ISO9960+UDF(1.02)

5. Set labels.

6. Burn to device.

7. Confirm writing dvd-video.

8. Burn finished successfully.

9. Verify finished successfully.

10. Try open disk content on PC - Error! Like disk is empty.

11. Try playback on DVD player - Ok!

 

Second scenario step-by-step:

1. Start ImgBurn.

2. Switch to Build mode.

3. Add folder with VIDEO_TS

4. Set Filesystems to ISO9960+UDF(1.02)

5. Set labels.

6. Burn to IMAGE.

7. Confirm writing dvd-video.

8. Burn finished successfully.

9. DON`T CLOSE IMGBURN.

10. Switch to image writing.

11. Burn image.

12. Verify finished successfully.

13. Try open disk content on PC - Ok. Can copy VIDEO_TS and AUDIO_TS folders.

14. Try playback on DVD player - Ok!

 

Third scenario step-by-step:

1. Start ImgBurn.

2. Switch to Build mode.

3. Add folder with VIDEO_TS

4. Set Filesystems to ISO9960+UDF(1.02)

5. Set labels.

6. Burn to IMAGE.

7. Confirm writing dvd-video.

8. Image write finished successfully.

9. RESTART IMGBURN.

10. Switch to image writing.

11. Burn image.

12. Burn finished successfully.

13. Verify finished successfully.

14. Try open disk content on PC - Error! Like disk is empty.

15. Try playback on DVD player - Ok!

 

Question: What the problem? Why i can`t open disk on PC, but can view disk on player.

 

System: Windows 7 x64 Ultimate, ImBurn 2.5.0.0, DVD+R Verbatim LightScribe, ASUS DRW24B1LT 1.01

CPU C2D E6700 2.6 GHz, 8Gb RAM,

[Cynthia]

Any chance you can add some logs of the different scenarios?

[mmalves]

If it verifies OK then Windows may not be detecting the change in the disc's contents. You haven't messed with AutoRun/AutoPlay settings, have you? If you eject then re-insert the disc (with ImgBurn closed) does Windows correctly detect the disc?