Cant change Booktype SH-S182D

[Chimiko]

Hello,

Im trying to burn some xbox 360 games. i just have one small issue, imgburner dosent allow me to change the booktype.

I've been trying to find some version of my drive firmware that works but nothing seam to be working.

So when i go: Change Book type >> Samsung

I just get

 

"Unknown (No way to query current setting!)

 

When i try to change it into DVD-ROM it just says "Success!"

but it really dosent change anything. Here is the log aswell.

 

I 21:24:34 ImgBurn Version 2.5.0.0 started!

I 21:24:34 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 21:24:34 Total Physical Memory: 4 191 816 KB - Available: 2 594 420 KB

W 21:24:34 SPTD can have a detrimental effect on drive performance.

I 21:24:34 Initialising SPTI...

I 21:24:34 Searching for SCSI / ATAPI devices...

I 21:24:34 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 21:40:17 Close Request Acknowledged

I 21:40:17 Closing Down...

I 21:40:27 Shutting down SPTI...

I 21:40:27 ImgBurn closed!

 

Anyone have any idea how to make this work, cause im out of ideas. :-(

 

TSSTcorp CD/DVDW SH-S182D SB05 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4 173 824

Free Space: 8 547 991 552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 4x; 6x; 8x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2 086 912

Changeable: Yes

 

Physical Format Information (ADIP):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196 608

Last Physical Sector of Data Area: 16 580 607

Last Physical Sector in Layer 0: 2 283 519

 

Physical Format Information (Last Recorded):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196 608

Last Physical Sector of Data Area: 16 580 607

Last Physical Sector in Layer 0: 2 283 519

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 4173823 (0x003FAFFF)

-> RS: 11 080 KB/s (8x) - WS: 5 540 KB/s (4x)

Descriptor 2...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 4173823 (0x003FAFFF)

-> RS: 11 080 KB/s (8x) - WS: 8 310 KB/s (6x)

Descriptor 3...

-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 4173823 (0x003FAFFF)

-> RS: 11 080 KB/s (8x) - WS: 11 080 KB/s (8x)

Edited January 18, 2010 by Chimiko

[mmalves]

ImgBurn automatically booktypes +R media to DVD-ROM on Samsung burners, so you don't need to worry about it. Also, you do know that the booktype is only written to the disc when you actually burn it, right?

 

By the way, you can find the latest firmware for your burner here (remove any disc and close the tray before updating then reboot after it's finished). And while you're at it, also have a look here

[Chimiko]

ImgBurn automatically booktypes +R media to DVD-ROM on Samsung burners, so you don't need to worry about it. Also, you do know that the booktype is only written to the disc when you actually burn it, right?

 

By the way, you can find the latest firmware for your burner here (remove any disc and close the tray before updating then reboot after it's finished).

 

Yeah, i heard but when i actually do burn the cd it dosent work in the xbox. i've tried some other games that my friend had and they work just fine in the box so its something with my burning. And i supspect its the booktype. The laybreak is fine. I know its possible to burn the games cause i've done it before but it was AGES ago so now i really have no clue how i did it.

 

But the only thing i havent been able to change is the booktype so my guess is that it dosent change it too DVD-ROM like i want it too..

 

Is there someway to change it even tho its supposed to "automaticlly" change it?

 

 

EDIT:

 

And yes i know how to update windows im just to lazy to actually get myself to do it

Edited January 18, 2010 by Chimiko

[mmalves]

Post the log of one of those burns that doesn't work (you can find the log in ImgBurn's Help menu).

 

As for booktyping manually it's exactly the way you were doing (remember it said success).

[Chimiko]

It dosent fail to burn, it just the xbox that fails to read it.

And im running out of dvd's to actually keep experementing with i think i've burned atleast 20 of them already. None of them works #39;(

 

EDIT:

 

If i try to change it manually it just say "Success" it dosent really burn it in DVD-ROM insted it burns it in DVD+R DL even tho i want it in DVD-ROM

 

I 16:50:10 ImgBurn Version 2.5.0.0 started!

I 16:50:10 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 16:50:10 Total Physical Memory: 4 191 816 KB - Available: 3 248 040 KB

W 16:50:10 SPTD can have a detrimental effect on drive performance.

I 16:50:10 Initialising SPTI...

I 16:50:10 Searching for SCSI / ATAPI devices...

I 16:50:11 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 16:54:25 Operation Started!

I 16:54:25 Source File: E:\MagnaCarta_II_PAL_XBOX360-SPARE\DVD1\sp-mc2-disc1.iso

I 16:54:25 Source File Sectors: 3 827 488 (MODE1/2048)

I 16:54:25 Source File Size: 7 838 695 424 bytes

I 16:54:25 Source File Volume Identifier: DVD_ROM

I 16:54:25 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 16:54:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:54:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:54:25 Source File File System(s): ISO9660; UDF (1.50)

I 16:54:25 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-S182D SB06 (F:) (ATA)

I 16:54:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 16:54:25 Destination Media Sectors: 4 173 824

I 16:54:25 Write Mode: DVD

I 16:54:25 Write Type: DAO

I 16:54:25 Write Speed: MAX

I 16:54:25 Link Size: Auto

I 16:54:25 Lock Volume: Yes

I 16:54:25 Test Mode: No

I 16:54:25 OPC: No

I 16:54:25 BURN-Proof: Enabled

I 16:54:25 Book Type Setting: DVD-ROM

I 16:54:25 User Specified L0 Data Zone Capacity: 1 913 760

E 16:55:20 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 16:55:20 Operation Failed! - Duration: 00:00:55

I 16:55:20 Average Write Rate: N/A - Maximum Write Rate: N/A

I 16:58:42 Operation Started!

I 16:58:42 Source File: E:\MagnaCarta_II_PAL_XBOX360-SPARE\DVD1\sp-mc2-disc1.iso

I 16:58:42 Source File Sectors: 3 827 488 (MODE1/2048)

I 16:58:42 Source File Size: 7 838 695 424 bytes

I 16:58:42 Source File Volume Identifier: DVD_ROM

I 16:58:42 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 16:58:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:58:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:58:42 Source File File System(s): ISO9660; UDF (1.50)

I 16:58:42 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-S182D SB06 (F:) (ATA)

I 16:58:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 16:58:42 Destination Media Sectors: 3 827 520

I 16:58:42 Write Mode: DVD

I 16:58:42 Write Type: DAO

I 16:58:42 Write Speed: 2,4x

I 16:58:42 Link Size: Auto

I 16:58:42 Lock Volume: Yes

I 16:58:42 Test Mode: No

I 16:58:42 OPC: No

I 16:58:42 BURN-Proof: Enabled

W 16:58:42 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x)

I 16:58:42 Book Type Setting: DVD-ROM

I 16:58:42 User Specified L0 Data Zone Capacity: 1 913 760

I 16:58:56 Set L0 Data Zone Capacity Succeeded!

I 16:58:56 Filling Buffer... (40 MB)

I 16:58:57 Writing LeadIn...

I 16:59:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 16:59:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 16:59:14 Writing Layer 0... (LBA: 0 - 1913759)

I 17:10:59 Writing Layer 1... (LBA: 1913760 - 3827487)

I 17:22:47 Synchronising Cache...

I 17:22:50 Closing Track...

I 17:23:01 Finalising Disc...

I 17:23:47 Exporting Graph Data...

I 17:23:47 Graph Data File: C:\Users\Chimi\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_SH-S182D_SB06_DEN-14-JANUARI-2010_16-58_MKM-003-00_2,4x.ibg

I 17:23:47 Export Successfully Completed!

I 17:23:47 Operation Successfully Completed! - Duration: 00:25:05

I 17:23:47 Average Write Rate: 5 417 KB/s (3.9x) - Maximum Write Rate: 5 593 KB/s (4.0x)

I 18:01:53 Close Request Acknowledged

I 18:01:53 Closing Down...

I 18:01:54 Shutting down SPTI...

I 18:01:54 ImgBurn closed!

Edited January 18, 2010 by Chimiko

[Chimiko]

Also, it seam like its writing to fast. I wanna write the CD in 2.4x but its writing in 4x. Is that cause the CD is 8x? :s

[jeff_nz]

It dosent fail to burn, it just the xbox that fails to read it.

Have you read this pinned post at the top of the support forum?

 

http://forum.imgburn.com/index.php?showtopic=12200

 

 

it dosent really burn it in DVD-ROM insted it burns it in DVD+R DL

I think you're mistaken. Here's what is says in the log you posted...

 

I 16:58:42 Book Type Setting: DVD-ROM

 

 

Also, it seam like its writing to fast. I wanna write the CD in 2.4x but its writing in 4x. Is that cause the CD is 8x? :s

It depends on a combination of your drive/firmware and the media used. Slower isn't necessarily better and that's apparently what your drive manufacturer thinks too, these are your options for those Verbatim DL blanks...

 

I 16:54:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

 

.

Edited January 18, 2010 by jeff_nz

[mmalves]

Why are you using SB06 firmware when there's SB07 available? Since you didn't verify your burn we don't know if it was a good burn or not. You could also try cleaning the drive with a lens cleaning disc.

[Chimiko]

Okay, im gona try update my FW to SB07 and do a verify.

 

As for the lense. Since the other games works with it i doubt its the lense.

 

I'll get back to you as soon as i tried those two options. : )

[LIGHTNING UK!]

Cleaning the lense may help with your 'power calibration error' errors.

[Chimiko]

Cleaning the lense may help with your 'power calibration error' errors.

 

The other games works just fine tho. The older ones and the one i tried at the guy that flashed my xbox 360. (Updated it today)

[LIGHTNING UK!]

What you're burning has nothing to do with it. It's not like the drive 'knows' it's an xbox image!

 

Power calibration errors are your drives way of bitching about stuff to do with the media.

 

So just clean the lense and hopefully it won't bitch quite so much.

[Chimiko]

And here comes the noobish question. How do you "Cleane" my lens? Do i have to crack open it?

 

EDIT:

my xbox is reading other burned dvds. The older one i made is still working. Just the newer ones arent working : (

Edited January 18, 2010 by Chimiko

[LIGHTNING UK!]

Typically you'd use a cleaning disc - you buy them in electronics stores.

 

If you want to go the manual route then that's your call. Open the drive and use a cotton bud (carefully!) on the lense. You'll still want the cleaning fluid on the bud though but you can probably use Alcohol or something similar.

 

Google might be able to help you out with a guide or something.

[Chimiko]

I couldent finish verifying the disc.

 

Here's the log:

 

I 00:16:06 ImgBurn Version 2.5.0.0 started!

I 00:16:06 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 00:16:06 Total Physical Memory: 4 191 816 KB - Available: 3 095 996 KB

W 00:16:06 SPTD can have a detrimental effect on drive performance.

I 00:16:06 Initialising SPTI...

I 00:16:06 Searching for SCSI / ATAPI devices...

I 00:16:07 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 00:18:12 Operation Started!

I 00:18:12 Source File: E:\MagnaCarta_II_PAL_XBOX360-SPARE\DVD1\sp-mc2-disc1.iso

I 00:18:12 Source File Sectors: 3 827 488 (MODE1/2048)

I 00:18:12 Source File Size: 7 838 695 424 bytes

I 00:18:12 Source File Volume Identifier: DVD_ROM

I 00:18:12 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 00:18:12 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:18:12 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:18:12 Source File File System(s): ISO9660; UDF (1.50)

I 00:18:12 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-S182D SB07 (F:) (ATA)

I 00:18:12 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 00:18:12 Destination Media Sectors: 4 173 824

I 00:18:12 Write Mode: DVD

I 00:18:12 Write Type: DAO

I 00:18:12 Write Speed: 2,4x

I 00:18:12 Link Size: Auto

I 00:18:12 Lock Volume: Yes

I 00:18:12 Test Mode: No

I 00:18:12 OPC: No

I 00:18:12 BURN-Proof: Enabled

W 00:18:12 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x)

I 00:18:12 Book Type Setting: DVD-ROM

I 00:18:12 User Specified L0 Data Zone Capacity: 1 913 760

I 00:18:40 Set L0 Data Zone Capacity Succeeded!

I 00:18:40 Filling Buffer... (40 MB)

I 00:18:41 Writing LeadIn...

I 00:18:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 00:18:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 00:18:55 Writing Layer 0... (LBA: 0 - 1913759)

I 00:30:40 Writing Layer 1... (LBA: 1913760 - 3827487)

I 00:42:28 Synchronising Cache...

I 00:42:31 Closing Track...

I 00:42:40 Finalising Disc...

I 00:43:26 Exporting Graph Data...

I 00:43:26 Graph Data File: C:\Users\Chimi\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_SH-S182D_SB07_DEN-19-JANUARI-2010_00-18_MKM-003-00_2,4x.ibg

I 00:43:26 Export Successfully Completed!

I 00:43:26 Operation Successfully Completed! - Duration: 00:25:14

I 00:43:26 Average Write Rate: 5 417 KB/s (3.9x) - Maximum Write Rate: 5 590 KB/s (4.0x)

I 00:43:26 Cycling Tray before Verify...

W 00:43:34 Waiting for device to become ready...

I 00:44:00 Device Ready!

I 00:44:01 Operation Started!

I 00:44:01 Source Device: [0:0:0] TSSTcorp CD/DVDW SH-S182D SB07 (F:) (ATA)

I 00:44:01 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 00:44:01 Image File: E:\MagnaCarta_II_PAL_XBOX360-SPARE\DVD1\sp-mc2-disc1.iso

I 00:44:01 Image File Sectors: 3 827 488 (MODE1/2048)

I 00:44:01 Image File Size: 7 838 695 424 bytes

I 00:44:01 Image File Volume Identifier: DVD_ROM

I 00:44:01 Image File Volume Set Identifier: 356fc000MS UDFBridge

I 00:44:01 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:44:01 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:44:01 Image File File System(s): ISO9660; UDF (1.50)

I 00:44:01 Read Speed (Data/Audio): MAX / MAX

I 00:44:01 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 00:44:01 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 00:44:01 Verifying Layer 0... (LBA: 0 - 1913759)

I 00:52:15 Verifying Layer 1... (LBA: 1913760 - 3827487)

W 00:52:35 Failed to Read Sector 1913760 - Reason: Timeout on Logical Unit

W 00:52:46 Retrying (1)...

W 00:52:53 Retry Failed - Reason: Timeout on Logical Unit

W 00:52:54 Failed to Read Sector 1913760 - Reason: Timeout on Logical Unit

W 00:53:01 Failed to Read Sector 1913761 - Reason: Timeout on Logical Unit

W 00:53:04 Failed to Read Sector 1913761 - Reason: Timeout on Logical Unit

W 00:53:12 Failed to Read Sector 1913762 - Reason: Timeout on Logical Unit

E 00:53:13 Failed to Read Sector 1913762 - Reason: Timeout on Logical Unit

E 00:53:13 Failed to Verify Sectors!

I 00:53:13 Exporting Graph Data...

I 00:53:13 Graph Data File: C:\Users\Chimi\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_SH-S182D_SB07_DEN-19-JANUARI-2010_00-18_MKM-003-00_2,4x.ibg

I 00:53:13 Export Successfully Completed!

E 00:53:13 Operation Failed! - Duration: 00:09:12

I 00:53:13 Average Verify Rate: 6 933 KB/s (5.0x) - Maximum Verify Rate: 11 133 KB/s (8.0x)

I 00:54:43 Close Request Acknowledged

I 00:54:43 Closing Down...

I 00:54:43 Shutting down SPTI...

I 00:54:43 ImgBurn closed!

 

The only thing my xbox is saying when i put in the DVD's i burn (the new ones) is "Open Tray"

Do i really have to crack open my xbox and clean the lens? I mean all the other games are working properly. Burned and non burned games. I must be doing something wrong... :S

Edited January 19, 2010 by Chimiko

[mmalves]

It's the burner that's throwing up errors while burning so it should be pretty obvious that you need to clean the lens of the burner

[Chimiko]

Thanks for all your reply guys you been most helpful.

Im gona run down and buy a new drive cause im to lazy to actually clean it. (and i honestly have no idea how to do it without breaking everything. )

Do you guys have any tips? : )