coldengrey Posted January 24, 2010 Posted January 24, 2010 I've burned over 55 dl dvd's and never had a coaster - until the last 2.... Have not changed blank media (using Verbatim's from same spindle as last 20+ successful burns). Nor have I changed any settings. I hope these are the correct logs you need: if not sorry - I'll get whatever info is needed. Anyone have any advice or suggestions on how to correct or what's wrong? I'd Really appreciate any info. If you need more or other info let me know. Thanks a lot! -->I've included the IMG Burn Verify Error Report and another Error Log. -->Only thing I can think of as to why suddenly burning coasters after 100 successful is- recently my hard drive has gotten down to around 10GB free (obviously burning nearly that size image on 8GB DL DVD+R's) Here is the IMG Burn Verify: I/O Error! Device [0:0:0] TSST corp DVD+RW TS-L632H D200 (E:) (ATA) Scsi Status: 0x02 Interpretation: Check Condition CDB: 28 00 00 14 76 1A 00 00 01 00 00 00 00 00 00 00 00 Interpretation: L-EC Uncorrectable Error -------------- Here's the Log info, too: 08:33:33 ImgBurn Version 2.4.0.0 started! I 08:33:33 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 08:33:33 Total Physical Memory: 2,094,544 KB - Available: 907,400 KB I 08:33:34 Initialising SPTI... I 08:33:34 Searching for SCSI / ATAPI devices... I 08:33:46 Found 1 DVD±RW! I 08:34:24 Operation Started! I 08:34:24 Source Device: [0:0:0] TSSTcorp DVD+-RW TS-L632H D200 (E:) (ATA) I 08:34:24 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x) I 08:34:24 Image File: C:\Users\Jason\xb360 extracted iso games\me23601.dvd I 08:34:24 Image File Sectors: 3,827,488 (MODE1/2048) I 08:34:24 Image File Size: 7,838,695,424 bytes I 08:34:24 Image File Volume Identifier: DVD_ROM I 08:34:24 Image File Volume Set Identifier: ec67c000MS UDFBridge I 08:34:24 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 08:34:24 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 08:34:24 Image File File System(s): ISO9660, UDF (1.50) I 08:34:24 Read Speed (Data/Audio): MAX / MAX I 08:34:25 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 08:34:25 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 08:34:25 Verifying Layer 0... (LBA: 0 - 1913759) W 09:17:46 Failed to Read Sector 1340954 - L-EC Uncorrectable Error W 09:17:59 Failed to Read Sector 1340955 - L-EC Uncorrectable Error
LIGHTNING UK! Posted January 24, 2010 Posted January 24, 2010 Try cleaning the drive with a cleaning disc. Update ImgBurn. Try some discs from a different spindle.
mmalves Posted January 24, 2010 Posted January 24, 2010 I 08:34:24 Source Device: [0:0:0] TSSTcorp DVD+-RW TS-L632H D200 (E:) (ATA) Also update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished).
coldengrey Posted January 25, 2010 Author Posted January 25, 2010 I 08:34:24 Source Device: [0:0:0] TSSTcorp DVD+-RW TS-L632H D200 (E:) (ATA) Also update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). I've successfully burned over 55 discs- not sure firmware has much to do with it... But I'll give it a shot because nothing else to go with. Can anyone tell what caused the error looking at the logs?
Cynthia Posted January 25, 2010 Posted January 25, 2010 The error is an ordinary "can't read the sector" issue. Usually caused by a bad burn.
coldengrey Posted January 26, 2010 Author Posted January 26, 2010 The error is an ordinary "can't read the sector" issue. Usually caused by a bad burn. But any idea what has caused the "bad burn"? Have had 3 "bad burns in a row after 50+ successful burns..
Recommended Posts