Jump to content

Recommended Posts

Posted

Hi, iv'e been using img burn for a goood long while now. awsome tools. best ever.

 

but i have a glitch. im using a lite-on drive DH16A6S and i cant change Book type. wont let me do anything, wont even read my current book type.

 

i tried doing the usual. installing driver/updating BUT the bloody lite-on website dont even hav my drivers... iv'e been hunting google for the whole day. hit dead end after dead end. ahy suggestions?.

 

Thanks.

Posted (edited)

Wow, Thanks. sucha fast reply :-D

 

thanks for the drivers, i will see if they work ect.

 

 

by the way. i guessed that dvd-r would be the book type default. but iv'e been wanting to change it to Dual Layer R Mode.

 

Just edited my reply message,

 

OMG the drivers won't work. it's crying @ the fact i need PLDS Version. Yet my drive is still DH16A6S. :(

Edited by Stan464
Posted

Could be that you already have the latest firmware installed.

 

-R media can't be book typed.

 

When +R media is book typed the book type is changed to DVD-ROM.

Posted

im utter confused. i know my drive is a lite-on but it wont update. last update was 2008.

 

iv'e not a clue what to do. it says it's capable of burning dual layer disks. and reading them ect.

 

yet i cant change book type.

Posted

If it's a Lite-On and you are going to burn +R DL media, ImgBurn will do the book type for you. Burn one and post the log. Don't forget to Verify it so we can see if the book type worked as it should.

Posted

When you burn a +R disc it will be book typed as DVD-ROM (if everything works as it should)

 

If it has been burned and not book typed to DVD-ROM there is no way you can read it as a DVD-ROM.

 

I'm not sure what you are trying to do. Read the disc in ImgBurn or some other device?

Posted

Well i don't want to promote piracy ect, but im wanting the disk to be read in that way so it will work correctly in the Xbox360 with modified Firmware.

Posted

If you decide to burn a disc and verify it and then look in the log, you know that it worked if you see a row like this one and the book type is set to DVD-ROM.

 

 

A burn with a Lite-On drive:

 

W 00:13:53 Waiting for device to become ready...

I 00:14:18 Device Ready!

I 00:14:18 Operation Started!

I 00:14:18 Source Device: [2:1:0] ATAPI DVD A DH20A3H YV6D (E:) (ATA)

I 00:14:18 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

 

 

 

 

The full log:

 

I 23:55:24 ImgBurn Version 2.4.2.10 Beta started!

I 23:55:24 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 23:55:24 Total Physical Memory: 2�095�484 KB - Available: 821�460 KB

I 23:55:24 Initialising SPTI...

I 23:55:24 Searching for SCSI / ATAPI devices...

I 23:55:28 Found 2 DVD�RWs, 3 DVD�RW/RAMs, 1 BD-ROM and 1 BD-RE!

I 23:55:48 Operation Started!

I 23:55:48 Source File: -==/\/[DISCOVERY IMAGE]\/\==-

I 23:55:48 Source File Sectors: 4�173�824 (MODE1/2048)

I 23:55:48 Source File Size: 8�547�991�552 bytes

I 23:55:48 Source File Volume Identifier: DISCOVERY_IMAGE

I 23:55:48 Source File File System(s): None

I 23:55:48 Destination Device: [2:1:0] ATAPI DVD A DH20A3H YV6D (E:) (ATA)

I 23:55:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

I 23:55:48 Destination Media Sectors: 4�173�824

I 23:55:48 Write Mode: DVD

I 23:55:48 Write Type: DAO

I 23:55:48 Write Speed: 8x

I 23:55:48 Link Size: Auto

I 23:55:48 Lock Volume: Yes

I 23:55:48 Test Mode: No

I 23:55:48 OPC: Yes

I 23:55:48 BURN-Proof: Enabled

I 23:55:48 Book Type Setting: DVD-ROM

I 23:55:48 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 23:56:17 Optimal L0 Data Zone Capacity: 2�086�912

I 23:56:17 Optimal L0 Data Zone Method: ECC Block Boundary

I 23:56:20 Filling Buffer... (40 MB)

I 23:56:20 Writing LeadIn...

I 23:56:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823)

I 23:56:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823)

I 23:56:22 Writing Layer 0... (LBA: 0 - 2086911)

I 00:04:10 Writing Layer 1... (LBA: 2086912 - 4173823)

I 00:13:09 Synchronising Cache...

I 00:13:14 Closing Track...

I 00:13:15 Finalising Disc...

I 00:13:46 Exporting Graph Data...

I 00:13:46 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_ATAPI_DVD_A_DH20A3H_YV6D_DEN-8-MARS-2009_23-55_RICOHJPN-D01-67_8x.ibg

I 00:13:46 Export Successfully Completed!

I 00:13:46 Operation Successfully Completed! - Duration: 00:17:58

I 00:13:46 Average Write Rate: 8�289 KB/s (6.0x) - Maximum Write Rate: 11�148 KB/s (8.0x)

I 00:13:46 Cycling Tray before Verify...

W 00:13:53 Waiting for device to become ready...

I 00:14:18 Device Ready!

I 00:14:18 Operation Started!

I 00:14:18 Source Device: [2:1:0] ATAPI DVD A DH20A3H YV6D (E:) (ATA)

I 00:14:18 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

I 00:14:18 Image File: -==/\/[DISCOVERY IMAGE]\/\==-

I 00:14:18 Image File Sectors: 4�173�824 (MODE1/2048)

I 00:14:18 Image File Size: 8�547�991�552 bytes

I 00:14:18 Image File Volume Identifier: DISCOVERY_IMAGE

I 00:14:18 Image File File System(s): None

I 00:14:18 Read Speed (Data/Audio): MAX / MAX

I 00:14:18 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823)

I 00:14:18 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823)

I 00:14:18 Verifying Layer 0... (LBA: 0 - 2086911)

I 00:20:26 Verifying Layer 1... (LBA: 2086912 - 4173823)

I 00:26:35 Exporting Graph Data...

I 00:26:35 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_ATAPI_DVD_A_DH20A3H_YV6D_DEN-8-MARS-2009_23-55_RICOHJPN-D01-67_8x.ibg

I 00:26:35 Export Successfully Completed!

I 00:26:35 Operation Successfully Completed! - Duration: 00:12:17

I 00:26:35 Average Verify Rate: 11�326 KB/s (8.2x) - Maximum Verify Rate: 16�673 KB/s (12.0x)

Posted

Ohh I See..

 

I Mean wow, you have been so helpful. other forums fail :-( full of sarcastic people that are no help what so ever.

 

soo when i burn for example "God Planet" and it requires Dual Layer Burning and i set the custom layer break ect.

 

when i burn it, it should end up being a dvd-dl-rom?

 

and it will be automaticly picked up and should know what to do with the .dvd and set the book type for me?

Posted

Yes. When you burn by picking the .dvd file you should see these two rows that will show up when you burn with a Lite-On. That means that you will end up with a DVD-ROM book typed disc. :)

 

I 23:55:48 Book Type Setting: DVD-ROM

I 23:55:48 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.