Maxvl Posted January 31, 2010 Posted January 31, 2010 Hi, I'm currently in a fight with my Xbox 360. It has iXtreme firmware version 1.6 and worked perfectly in the past with my verbatim 8x speed DVD + R DL dvd's. I burned those dvd's using Clone CD and the same burner I have now (TSST Corp CDDVDW TS-L632H), this burner is inside my Asus notebook. After a while I decided to burn some new games, all wave 2, verified with abgx360. It didn't work with CloneCd so i tried imgburn. I set the layer break manually to 1913760 and the booktype to DVD-rom When i set the speed to 2.4x burnimg gave a warning that the speed should be 3x, 4x or 6x I know the speed should be 2.4x but I figured if I can't get 2.4x I'll try 3x. Didn't work either... I have now tried every speed and spend 8 dvd's, which have cost me about 12 Euro's. I really don't know what I'm doing wrong, since it worked for me in the past... I hope someone can help me out... here's the log for the last session: I 13:50:02 ImgBurn Version 2.5.0.0 started! I 13:50:02 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 13:50:02 Total Physical Memory: 3.144.172 KB - Available: 1.733.856 KB W 13:50:02 SPTD can have a detrimental effect on drive performance. I 13:50:02 Initialising SPTI... I 13:50:02 Searching for SCSI / ATAPI devices... I 13:50:05 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 14:04:13 Operation Started! I 14:04:13 Source File: D:\FTD\rrod-fo3goty-d1\rrod-fo3goty-d1.dvd I 14:04:13 Source File Sectors: 3.825.924 (MODE1/2048) I 14:04:13 Source File Size: 7.835.492.352 bytes I 14:04:13 Source File Volume Identifier: XGD2DVD_NTSC I 14:04:13 Source File Volume Set Identifier: 34672923 I 14:04:13 Source File Implementation Identifier: Sonic Scenarist 3.1 I 14:04:13 Source File File System(s): ISO9660; UDF (1.02) I 14:04:13 Destination Device: [0:0:0] TSSTcorp CDDVDW TS-L632H AS04 (E:) (ATA) I 14:04:13 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x; 4x; 6x) I 14:04:13 Destination Media Sectors: 4.173.824 I 14:04:13 Write Mode: DVD I 14:04:13 Write Type: DAO I 14:04:13 Write Speed: 6x I 14:04:13 Link Size: Auto I 14:04:13 Lock Volume: Yes I 14:04:13 Test Mode: No I 14:04:13 OPC: No I 14:04:13 BURN-Proof: Enabled I 14:04:16 Book Type Setting: DVD-ROM I 14:04:16 User Specified L0 Data Zone Capacity: 1.913.760 I 14:04:34 Set L0 Data Zone Capacity Succeeded! I 14:04:35 Filling Buffer... (40 MB) I 14:04:35 Writing LeadIn... I 14:04:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 14:04:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 14:04:55 Writing Layer 0... (LBA: 0 - 1913759) I 14:16:55 Writing Layer 1... (LBA: 1913760 - 3825923) I 14:29:39 Synchronising Cache... I 14:29:53 Closing Track... I 14:30:09 Finalising Disc... I 14:31:03 Exporting Graph Data... I 14:31:03 Graph Data File: C:\Users\Max\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L632H_AS04_ZONDAG-31-JANUARI-2010_14-04_MKM-003-00_6x.ibg I 14:31:03 Export Successfully Completed! I 14:31:03 Operation Successfully Completed! - Duration: 00:26:49 I 14:31:03 Average Write Rate: 5.159 KB/s (3.7x) - Maximum Write Rate: 8.329 KB/s (6.0x)
mmalves Posted January 31, 2010 Posted January 31, 2010 You should've left Verify enabled as that what tells you if the burn was good or not. You can still use the Verify mode to check that disc against the ISO image. If verify is OK then you should read this -> http://forum.imgburn.com/index.php?showtopic=12200
Recommended Posts