Session 1, Track 1 is smaller on the disc than it is in the image file.

[lolaxx]

Hi everyone, I'm having these 3 problems

E 17:38:43 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 17:38:43 Image File's Track Sectors: 2294912 (TOC Sectors: 2294912)

E 17:38:43 Operation Failed! - Duration: 00:00:00

 

and my log:

 

 

W 17:37:07 Waiting for device to become ready...

I 17:38:43 Device Ready!

I 17:38:43 Operation Started!

I 17:38:43 Source Device: [0:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (F:) (ATA)

I 17:38:43 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MBIPG101-R05-01) (Speeds: 4x, 8x, 12x, 16x)

I 17:38:43 Image File: C:\Documents and Settings\Şimal\Belgelerim\Downloads\Compressed\Caduceus_Z\Caduceus Z.iso

I 17:38:43 Image File Sectors: 2,294,912 (MODE1/2048)

I 17:38:43 Image File Size: 4,699,979,776 bytes

I 17:38:43 Image File Volume Identifier: Caduceus Z

I 17:38:43 Image File File System(s): Special

I 17:38:43 Read Speed (Data/Audio): MAX / MAX

E 17:38:43 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 17:38:43 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 17:38:43 Image File's Track Sectors: 2294912 (TOC Sectors: 2294912)

E 17:38:43 Operation Failed! - Duration: 00:00:00

I 17:38:43 Average Verify Rate: N/A - Maximum Verify Rate: N/A

 

 

I'd appreciate any help Thank you

[mmalves]

I 17:38:43 Source Device: [0:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (F:) (ATA)

I 17:38:43 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MBIPG101-R05-01) (Speeds: 4x, 8x, 12x, 16x)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning again at 8x or 12x. You could do better with high quality media such as Verbatim and Taiyo Yuden blanks.

[lolaxx]

I 17:38:43 Source Device: [0:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (F:) (ATA)

I 17:38:43 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MBIPG101-R05-01) (Speeds: 4x, 8x, 12x, 16x)

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning again at 8x or 12x. You could do better with high quality media such as Verbatim and Taiyo Yuden blanks.

 

 

Worked like a charm! Thank you soo much mmalves