mrbuzz Posted February 2, 2010 Share Posted February 2, 2010 (edited) Ok, here is my problem. Last week i managed to flash a friends Hitachi drive with no issues, The backups burned fine and played first time inserted all good..... My problem now lies with burining games after flashing a Benq VA6038, My problem is now burnging game backups, As you can see every time i try to burn disks i am getting this same error. None of my other software is letting me burn disks now either but the drive dose stil play and read disks.?? Please feel free to check thru to make sure i have done things correct.... Disks I am using are Verbatim DVD+R DL 8x 8.5GB 240Min Burning the disks at x2 or x2.4 speed's.. Burner is a LG DVD+RW+DL Drive which worked fine previously burning games with no issue.... The Drive is a HL-DT-ST DVDRAM GH22NS50 There is also a drive showing as ZWFQHQD 78XUNKTIJG1 SCI CDROM Device. HEEELLLPPP! Many Many thanks in advance for any help on the subject.... IMG LOG FILE ========================================================================================== START INFORMATION..........IMG BURN status ========================================================================================== HL-DT-ST DVDRAM GH22NS50 TN00 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 6x, 8x, 10x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (Last Recorded): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 11,080 KB/s (8x) Descriptor 5... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 13,850 KB/s (10x) Here is the img burning log. as you can see there is a I/O and a write error thats popping up. ========================================================================================== B U R N I N G L O G ERRORS!!!!!! ========================================================================================== I 14:46:52 ImgBurn Version 2.5.0.0 started! I 14:46:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 14:46:52 Total Physical Memory: 3,134,892 KB - Available: 2,497,044 KB W 14:46:52 SPTD can have a detrimental effect on drive performance. I 14:46:52 Initialising SPTI... I 14:46:52 Searching for SCSI / ATAPI devices... E 14:46:52 Failed to check for ImgBurn update! I 14:46:53 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 14:47:13 Operation Started! I 14:47:13 Source File: C:\Documents and Settings\Owner\Desktop\activate.iso I 14:47:13 Source File Sectors: 129,824 (MODE1/2048) I 14:47:13 Source File Size: 265,879,552 bytes I 14:47:13 Source File Volume Identifier: XBOX360 I 14:47:13 Source File Volume Set Identifier: 33479a57 I 14:47:13 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 14:47:13 Source File File System(s): ISO9660, UDF (1.02) I 14:47:13 Destination Device: [2:0:0] HL-DT-ST DVDRAM GH22NS50 TN00 (G (ATA) I 14:47:13 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) I 14:47:13 Destination Media Sectors: 4,173,824 I 14:47:13 Write Mode: DVD I 14:47:13 Write Type: DAO I 14:47:13 Write Speed: 2.4x I 14:47:13 Link Size: Auto I 14:47:13 Lock Volume: Yes I 14:47:13 Test Mode: No I 14:47:13 OPC: No I 14:47:13 BURN-Proof: Enabled I 14:47:14 Book Type Setting: DVD-ROM I 14:47:20 Optimal L0 Data Zone Capacity: 129,824 I 14:47:20 Optimal L0 Data Zone Method: None I 14:47:20 Filling Buffer... (40 MB) I 14:47:30 Writing LeadIn... W 14:48:00 Failed to Write Sectors 32 - 63 - Reason: Write Error W 14:48:00 Retrying (1 of 20)... W 14:48:00 Retry Failed - Reason: Invalid Address For Write W 14:48:00 Retrying (2 of 20)... W 14:48:00 Retry Failed - Reason: Invalid Address For Write W 14:48:00 Retrying (3 of 20)... W 14:48:00 Retry Failed - Reason: Invalid Address For Write W 14:48:00 Retrying (4 of 20)... W 14:48:00 Retry Failed - Reason: Invalid Address For Write W 14:48:00 Retrying (5 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (6 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (7 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (8 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (9 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (10 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (11 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (12 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (13 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (14 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (15 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (16 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (17 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (18 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (19 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write W 14:48:01 Retrying (20 of 20)... W 14:48:01 Retry Failed - Reason: Invalid Address For Write E 14:49:17 Failed to Write Sectors 32 - 63 - Reason: Write Error E 14:49:17 Next Writable Address: 0 I 14:49:17 Synchronising Cache... W 14:49:19 User opted to skip the 'Close Track/Session/Disc' functions. E 14:49:19 Failed to Write Image! E 14:49:19 Operation Failed! - Duration: 00:02:05 I 14:49:19 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) ========================================================================================== I have posted up a RAR with all of the IMG BURN settings too, just incase its something in there thats causing this issue with burning. Here are my Img Burn Settings.... added them to a rar file as it takes me ages to upload pics for some reason. http://rapidshare.com/files/34486360...URN_ERRORS.rar I have also attached this file for anyone wanting to have a look. Many many thanks in advance!! Peace! IMG BURN ERRORS.rar Edited February 2, 2010 by mrbuzz Link to comment Share on other sites More sharing options...
mmalves Posted February 2, 2010 Share Posted February 2, 2010 I 14:47:13 Destination Device: [2:0:0] HL-DT-ST DVDRAM GH22NS50 TN00 (G (ATA)I 14:47:13 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning again at 4x or 6x. And leave Verify enabled in case you've changed it. Link to comment Share on other sites More sharing options...
mrbuzz Posted February 7, 2010 Author Share Posted February 7, 2010 I 14:47:13 Destination Device: [2:0:0] HL-DT-ST DVDRAM GH22NS50 TN00 (G (ATA)I 14:47:13 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning again at 4x or 6x. And leave Verify enabled in case you've changed it. many thanks for that and the link to the update much appriciated take care buzz Link to comment Share on other sites More sharing options...
mrbuzz Posted February 16, 2010 Author Share Posted February 16, 2010 I have updated my drive and now i am getting this burn error.? cant understand how it burned fine once then now its not and getting all these errors. i have tryed new disks but still noting here is the log file I 00:36:07 ImgBurn Version 2.5.0.0 started! I 00:36:08 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 00:36:08 Total Physical Memory: 3,134,892 KB - Available: 2,246,016 KB W 00:36:08 SPTD can have a detrimental effect on drive performance. I 00:36:08 Initialising SPTI... I 00:36:08 Searching for SCSI / ATAPI devices... I 00:36:08 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 00:37:43 Operation Started! I 00:37:43 Source File: D:\XBOX GAMES ISO\Superbike 2009\alw-sbk09.dvd I 00:37:43 Source File Sectors: 3,827,488 (MODE1/2048) I 00:37:43 Source File Size: 7,838,695,424 bytes I 00:37:43 Source File Volume Identifier: DVD_ROM I 00:37:43 Source File Volume Set Identifier: 356fc000MS UDFBridge I 00:37:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 00:37:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 00:37:43 Source File File System(s): ISO9660, UDF (1.50) I 00:37:43 Destination Device: [2:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (ATA) I 00:37:43 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) I 00:37:43 Destination Media Sectors: 4,173,824 I 00:37:43 Write Mode: DVD I 00:37:43 Write Type: DAO I 00:37:43 Write Speed: MAX I 00:37:43 Link Size: Auto I 00:37:43 Lock Volume: Yes I 00:37:43 Test Mode: No I 00:37:43 OPC: No I 00:37:43 BURN-Proof: Enabled I 00:37:43 Book Type Setting: DVD-ROM I 00:37:43 User Specified L0 Data Zone Capacity: 1,913,760 I 00:37:46 Abort Request Acknowledged E 00:38:58 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure E 00:38:58 Operation Failed! - Duration: 00:01:15 I 00:38:58 Average Write Rate: N/A - Maximum Write Rate: N/A I 00:39:06 Operation Started! I 00:39:06 Source File: D:\XBOX GAMES ISO\Superbike 2009\alw-sbk09.dvd I 00:39:06 Source File Sectors: 3,827,488 (MODE1/2048) I 00:39:06 Source File Size: 7,838,695,424 bytes I 00:39:06 Source File Volume Identifier: DVD_ROM I 00:39:06 Source File Volume Set Identifier: 356fc000MS UDFBridge I 00:39:06 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 00:39:06 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 00:39:06 Source File File System(s): ISO9660, UDF (1.50) I 00:39:06 Destination Device: [2:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (ATA) I 00:39:06 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) I 00:39:06 Destination Media Sectors: 3,827,520 I 00:39:06 Write Mode: DVD I 00:39:06 Write Type: DAO I 00:39:06 Write Speed: 2x I 00:39:06 Link Size: Auto I 00:39:06 Lock Volume: Yes I 00:39:06 Test Mode: No I 00:39:06 OPC: No I 00:39:06 BURN-Proof: Enabled W 00:39:06 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 11,079 KB/s (8x) I 00:39:06 Book Type Setting: DVD-ROM I 00:39:06 User Specified L0 Data Zone Capacity: 1,913,760 I 00:39:06 Set L0 Data Zone Capacity Succeeded! I 00:39:07 Filling Buffer... (40 MB) I 00:39:08 Writing LeadIn... I 00:39:13 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 00:39:13 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 00:39:13 Writing Layer 0... (LBA: 0 - 1913759) I 00:59:03 Writing Layer 1... (LBA: 1913760 - 3827487) I 01:18:55 Synchronising Cache... W 01:19:31 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Write Error W 01:19:31 Synchronise Cache Failed! - Reason: Write Error W 01:19:31 Retrying (1 of 3)... W 01:20:10 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Write Error W 01:20:10 Retry Failed - Reason: Write Error W 01:20:10 Retrying (2 of 3)... W 01:20:46 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Write Error W 01:20:46 Retry Failed - Reason: Write Error W 01:20:46 Retrying (3 of 3)... W 01:21:22 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Write Error W 01:21:22 Retry Failed - Reason: Write Error I 01:54:12 Closing Track... I 01:54:13 Finalising Disc... W 01:54:17 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 01:54:18 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 01:54:18 Retrying (1 of 3)... W 01:54:19 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 01:54:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 01:54:19 Retrying (2 of 3)... W 01:54:20 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 01:54:20 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 01:54:20 Retrying (3 of 3)... W 01:54:21 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 01:54:21 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session E 01:55:04 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session I 01:55:04 Finalising Disc (Last Attempt!)... E 01:55:04 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session E 01:55:04 Failed to Write Image! I 01:55:04 Exporting Graph Data... I 01:55:04 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_16-FEBRUARY-2010_00-39_MKM-003-00_2x.ibg I 01:55:04 Export Successfully Completed! E 01:55:04 Operation Failed! - Duration: 01:15:58 I 01:55:04 Average Write Rate: 3,213 KB/s (2.3x) - Maximum Write Rate: 3,413 KB/s (2.5x) Link to comment Share on other sites More sharing options...
Cynthia Posted February 16, 2010 Share Posted February 16, 2010 The first error in that log is E 00:38:58 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure I've seen that happen with speeds the drive doesn't like. Now you have tried max = 8x. The other speeds to try with: (Speeds: 2.4x, 4x, 6x, 8x) The second burn (second posted error message) in that log is failing because you are using a used disc. Link to comment Share on other sites More sharing options...
mrbuzz Posted February 16, 2010 Author Share Posted February 16, 2010 so every time this burn fails it fucks the disks then? as i defo aint put anything onto it? only got that error when trying? Link to comment Share on other sites More sharing options...
mrbuzz Posted February 16, 2010 Author Share Posted February 16, 2010 so every time this burn fails it fucks the disks then? as i defo aint put anything onto it? only got that error when trying? HL-DT-ST DVDRAM GH22NS50 TN02 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (Last Recorded): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4173823 (0x003FAFFF) -> RS: 6,876 KB/s (5x) - WS: 11,080 KB/s (8x) Link to comment Share on other sites More sharing options...
mrbuzz Posted February 16, 2010 Author Share Posted February 16, 2010 now im getting this error Link to comment Share on other sites More sharing options...
Cynthia Posted February 16, 2010 Share Posted February 16, 2010 now im getting this error What speed did you burn that disc at? Link to comment Share on other sites More sharing options...
Recommended Posts