SeizeCTRL Posted February 3, 2010 Share Posted February 3, 2010 (edited) when i try to burn anything, my buffer keeps dropping, then waits for hard drive activity to reach threshold level, but im not doing anything other than burning, and it does it when i burn files from my second hard drive as well. my device buffer is always 0% too, never goes up I 18:36:19 ImgBurn Version 2.5.0.0 started!I 18:36:19 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 18:36:19 Total Physical Memory: 6,282,360 KB - Available: 4,954,324 KB I 18:36:19 Initialising SPTI... I 18:36:19 Searching for SCSI / ATAPI devices... I 18:36:19 Found 1 BD-RE! I 18:36:28 Operation Started! I 18:36:28 Source File: C:\Users\SeizeCTRL\Downloads\Call.Of.Duty.Modern.Warfare.2.XBOX360.RF-IPT\CODMW2.dvd I 18:36:28 Source File Sectors: 3,697,696 (MODE1/2048) I 18:36:28 Source File Size: 7,572,881,408 bytes I 18:36:28 Source File Volume Identifier: DVD_ROM I 18:36:28 Source File Volume Set Identifier: fd244000MS UDFBridge I 18:36:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:36:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:36:28 Source File File System(s): ISO9660, UDF (1.50) I 18:36:28 Destination Device: [2:1:0] HL-DT-ST BD-RE BH20N B103 (F:) (ATA) I 18:36:28 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 18:36:28 Destination Media Sectors: 4,173,824 I 18:36:28 Write Mode: DVD I 18:36:28 Write Type: DAO I 18:36:28 Write Speed: 2.4x I 18:36:28 Link Size: Auto I 18:36:28 Lock Volume: Yes I 18:36:28 Test Mode: No I 18:36:28 OPC: No I 18:36:28 BURN-Proof: Enabled I 18:36:28 Book Type Setting: N/A I 18:36:28 Optimal L0 Data Zone Capacity: 1,913,760 I 18:36:28 Optimal L0 Data Zone Method: Copied From Original Disc I 18:36:49 Set L0 Data Zone Capacity Succeeded! I 18:36:50 Filling Buffer... (40 MB) I 18:36:51 Writing LeadIn... I 18:36:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 18:36:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 18:36:52 Writing Layer 0... (LBA: 0 - 1913759) W 18:37:20 Waiting for buffers to recover... (LBA: 44960) W 18:37:21 Waiting for hard disk activity to reach threshold level... I 18:37:22 Writing Sectors... W 18:38:08 Waiting for buffers to recover... (LBA: 120448) W 18:38:08 Waiting for hard disk activity to reach threshold level... I 18:38:09 Writing Sectors... W 18:43:20 Waiting for buffers to recover... (LBA: 619744) W 18:43:20 Waiting for hard disk activity to reach threshold level... I 18:43:22 Writing Sectors... W 18:44:28 Waiting for buffers to recover... (LBA: 726976) W 18:44:28 Waiting for hard disk activity to reach threshold level... I 18:44:30 Writing Sectors... W 18:47:22 Waiting for buffers to recover... (LBA: 1005152) W 18:47:23 Waiting for hard disk activity to reach threshold level... I 18:47:24 Writing Sectors... W 18:48:12 Waiting for buffers to recover... (LBA: 1081920) W 18:48:12 Waiting for hard disk activity to reach threshold level... I 18:48:13 Writing Sectors... W 18:55:18 Waiting for buffers to recover... (LBA: 1766848) W 18:55:19 Waiting for hard disk activity to reach threshold level... I 18:55:19 Writing Sectors... I 18:56:51 Writing Layer 1... (LBA: 1913760 - 3697695) W 18:59:57 Waiting for buffers to recover... (LBA: 2211072) W 18:59:58 Waiting for hard disk activity to reach threshold level... I 18:59:59 Writing Sectors... W 19:01:17 Waiting for buffers to recover... (LBA: 2336800) W 19:01:18 Waiting for hard disk activity to reach threshold level... I 19:01:19 Writing Sectors... W 19:01:58 Waiting for buffers to recover... (LBA: 2399104) W 19:01:58 Waiting for hard disk activity to reach threshold level... I 19:02:00 Writing Sectors... W 19:05:04 Waiting for buffers to recover... (LBA: 2695744) W 19:05:05 Waiting for hard disk activity to reach threshold level... I 19:05:05 Writing Sectors... W 19:09:18 Waiting for buffers to recover... (LBA: 3103008) W 19:09:18 Waiting for hard disk activity to reach threshold level... I 19:09:19 Writing Sectors... W 19:10:00 Waiting for buffers to recover... (LBA: 3168544) W 19:10:01 Waiting for hard disk activity to reach threshold level... I 19:10:02 Writing Sectors... W 19:12:19 Waiting for buffers to recover... (LBA: 3391168) W 19:12:20 Waiting for hard disk activity to reach threshold level... I 19:12:21 Writing Sectors... W 19:13:26 Waiting for buffers to recover... (LBA: 3495072) W 19:13:26 Waiting for hard disk activity to reach threshold level... I 19:13:27 Writing Sectors... W 19:14:39 Waiting for buffers to recover... (LBA: 3611392) W 19:14:40 Waiting for hard disk activity to reach threshold level... I 19:14:40 Writing Sectors... I 19:15:33 Synchronising Cache... I 19:15:35 Closing Track... I 19:15:36 Finalising Disc... I 19:17:55 Exporting Graph Data... I 19:17:55 Graph Data File: C:\Users\SeizeCTRL\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH20N_B103_TUESDAY-FEBRUARY-02-2010_6-36_PM_MKM-001-00_2.4x.ibg I 19:17:55 Export Successfully Completed! I 19:17:55 Operation Successfully Completed! - Duration: 00:41:22 I 19:17:55 Average Write Rate: 3,187 KB/s (2.3x) - Maximum Write Rate: 3,396 KB/s (2.5x) Edited February 3, 2010 by SeizeCTRL Link to comment Share on other sites More sharing options...
mmalves Posted February 3, 2010 Share Posted February 3, 2010 Go to Tools -> Settings -> I/O tab, enable the Reading - Always Use Buffered I/O option, click OK and see if it solves your buffer problem. Also... I 18:36:28 Destination Device: [2:1:0] HL-DT-ST BD-RE BH20N B103 (F:) (ATA) There's newer firmware available for your burner (remove any disc and close the tray before updating then reboot after it's finished). Link to comment Share on other sites More sharing options...
SeizeCTRL Posted February 3, 2010 Author Share Posted February 3, 2010 Go to Tools -> Settings -> I/O tab, enable the Reading - Always Use Buffered I/O option, click OK and see if it solves your buffer problem. Also... I 18:36:28 Destination Device: [2:1:0] HL-DT-ST BD-RE BH20N B103 (F:) (ATA) There's newer firmware available for your burner (remove any disc and close the tray before updating then reboot after it's finished). thanks, that fixed my buffer, my device buffer still says 0%, but that isn't really a problem, as everything still works fine. Link to comment Share on other sites More sharing options...
Recommended Posts