Your Mom's Open Source Posted February 10, 2010 Posted February 10, 2010 (edited) To start, I'm using Linux. I've used it to burn DVDs and such in the past (through wine), but never an Xbox360 game. I'm trying to burn Lost Odyssey (Four disc game). I always get this error: I 00:26:43 ImgBurn Version 2.5.0.0 started! I 00:26:43 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 00:26:43 Total Physical Memory: 2,061,232 KB - Available: 1,682,956 KB I 00:26:43 Initialising SPTI... I 00:26:43 Searching for SCSI / ATAPI devices... I 00:26:43 Found 1 DVD±RW! I 00:39:22 Operation Started! I 00:39:22 Source File: H:\Torrents\Complete\Lost Odyssey\CD1\lostodysseycd1.part01 (2)\lostod1.iso I 00:39:22 Source File Sectors: 3,825,924 (MODE1/2048) I 00:39:22 Source File Size: 7,835,492,352 bytes I 00:39:22 Source File Volume Identifier: XGD2DVD_NTSC I 00:39:22 Source File Volume Set Identifier: 34672923 I 00:39:22 Source File Implementation Identifier: Sonic Scenarist 3.1 I 00:39:22 Source File File System(s): ISO9660, UDF (1.02) I 00:39:22 Destination Device: [2:0:0] LITE-ON DVDRW SHW-160P6S PS08 (D:) I 00:39:22 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 00:39:22 Destination Media Sectors: 4,173,824 I 00:39:22 Write Mode: DVD I 00:39:22 Write Type: DAO I 00:39:22 Write Speed: MAX I 00:39:22 Link Size: Auto I 00:39:22 Lock Volume: Yes I 00:39:22 Test Mode: No I 00:39:22 OPC: No I 00:39:22 BURN-Proof: Enabled W 00:39:22 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled. I 00:39:22 Book Type Setting: N/A I 00:39:22 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 00:39:22 Optimal L0 Data Zone Capacity: 1,912,976 I 00:39:22 Optimal L0 Data Zone Method: ECC Block Boundary I 00:40:02 Abort Request Acknowledged E 00:40:12 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 00:40:12 Operation Failed! - Duration: 00:00:50 I 00:40:12 Average Write Rate: N/A - Maximum Write Rate: N/A I 00:42:33 Operation Started! I 00:42:33 Source File: H:\Torrents\Complete\Lost Odyssey\CD1\lostodysseycd1.part01 (2)\lostod1.iso I 00:42:33 Source File Sectors: 3,825,924 (MODE1/2048) I 00:42:33 Source File Size: 7,835,492,352 bytes I 00:42:33 Source File Volume Identifier: XGD2DVD_NTSC I 00:42:33 Source File Volume Set Identifier: 34672923 I 00:42:33 Source File Implementation Identifier: Sonic Scenarist 3.1 I 00:42:33 Source File File System(s): ISO9660, UDF (1.02) I 00:42:33 Destination Device: [2:0:0] LITE-ON DVDRW SHW-160P6S PS08 (D:) I 00:42:33 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 00:42:33 Destination Media Sectors: 4,173,824 I 00:42:33 Write Mode: DVD I 00:42:33 Write Type: DAO I 00:42:33 Write Speed: 4x I 00:42:33 Link Size: Auto I 00:42:33 Lock Volume: Yes I 00:42:34 Test Mode: No I 00:42:34 OPC: No I 00:42:34 BURN-Proof: Enabled I 00:42:34 Book Type Setting: N/A I 00:42:34 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 00:42:34 Optimal L0 Data Zone Capacity: 1,912,976 I 00:42:34 Optimal L0 Data Zone Method: ECC Block Boundary E 00:43:09 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 00:43:09 Operation Failed! - Duration: 00:00:35 I 00:43:09 Average Write Rate: N/A - Maximum Write Rate: N/A I 00:46:39 Operation Started! I 00:46:39 Source File: H:\Torrents\Complete\Lost Odyssey\CD1\lostodysseycd1.part01 (2)\lostod1.iso I 00:46:39 Source File Sectors: 3,825,924 (MODE1/2048) I 00:46:39 Source File Size: 7,835,492,352 bytes I 00:46:39 Source File Volume Identifier: XGD2DVD_NTSC I 00:46:39 Source File Volume Set Identifier: 34672923 I 00:46:39 Source File Implementation Identifier: Sonic Scenarist 3.1 I 00:46:39 Source File File System(s): ISO9660, UDF (1.02) I 00:46:39 Destination Device: [2:0:0] LITE-ON DVDRW SHW-160P6S PS08 (D:) I 00:46:39 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 00:46:39 Destination Media Sectors: 4,173,824 I 00:46:39 Write Mode: DVD I 00:46:39 Write Type: DAO I 00:46:39 Write Speed: 4x I 00:46:39 Link Size: Auto I 00:46:40 Lock Volume: Yes I 00:46:40 Test Mode: No I 00:46:40 OPC: No I 00:46:40 BURN-Proof: Enabled I 00:46:40 Book Type Setting: N/A I 00:46:40 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 00:46:40 Optimal L0 Data Zone Capacity: 1,912,976 I 00:46:40 Optimal L0 Data Zone Method: ECC Block Boundary W 00:47:07 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error I 00:47:07 Filling Buffer... (40 MB) I 00:47:08 Writing LeadIn... W 00:47:10 Failed to Write Sectors 0 - 15 - Reason: Power Calibration Area Error W 00:47:10 Retrying (1 of 20)... W 00:47:12 Retry Failed - Reason: Power Calibration Area Error W 00:47:12 Retrying (2 of 20)... W 00:47:14 Retry Failed - Reason: Power Calibration Area Error W 00:47:14 Retrying (3 of 20)... W 00:47:17 Retry Failed - Reason: Power Calibration Area Error W 00:47:17 Retrying (4 of 20)... W 00:47:19 Retry Failed - Reason: Power Calibration Area Error W 00:47:19 Retrying (5 of 20)... W 00:47:21 Retry Failed - Reason: Power Calibration Area Error W 00:47:21 Retrying (6 of 20)... W 00:47:23 Retry Failed - Reason: Power Calibration Area Error W 00:47:23 Retrying (7 of 20)... W 00:47:25 Retry Failed - Reason: Power Calibration Area Error W 00:47:25 Retrying (8 of 20)... W 00:47:27 Retry Failed - Reason: Power Calibration Area Error W 00:47:27 Retrying (9 of 20)... W 00:47:29 Retry Failed - Reason: Power Calibration Area Error W 00:47:29 Retrying (10 of 20)... W 00:47:31 Retry Failed - Reason: Power Calibration Area Error W 00:47:31 Retrying (11 of 20)... W 00:47:33 Retry Failed - Reason: Power Calibration Area Error W 00:47:33 Retrying (12 of 20)... W 00:47:35 Retry Failed - Reason: Power Calibration Area Error W 00:47:35 Retrying (13 of 20)... W 00:47:37 Retry Failed - Reason: Power Calibration Area Error W 00:47:38 Retrying (14 of 20)... W 00:47:40 Retry Failed - Reason: Power Calibration Area Error W 00:47:40 Retrying (15 of 20)... W 00:47:42 Retry Failed - Reason: Power Calibration Area Error W 00:47:42 Retrying (16 of 20)... W 00:47:44 Retry Failed - Reason: Power Calibration Area Error W 00:47:44 Retrying (17 of 20)... W 00:47:46 Retry Failed - Reason: Power Calibration Area Error W 00:47:46 Retrying (18 of 20)... W 00:47:48 Retry Failed - Reason: Power Calibration Area Error W 00:47:48 Retrying (19 of 20)... W 00:47:50 Retry Failed - Reason: Power Calibration Area Error W 00:47:50 Retrying (20 of 20)... W 00:47:52 Retry Failed - Reason: Power Calibration Area Error E 00:58:04 Failed to Write Sectors 0 - 15 - Reason: Power Calibration Area Error I 00:58:04 Synchronising Cache... W 00:58:12 User opted to skip the 'Close Track/Session/Disc' functions. E 00:58:12 Failed to Write Image! E 00:58:12 Operation Failed! - Duration: 00:11:33 I 00:58:12 Average Write Rate: N/A - Maximum Write Rate: N/A I don't know how to calibrate the power >< Any help would be much appreciated. If I have to use IMGBurn on an actual Windows PC, I will. I'd just rather use it on Linux is all. Though I don't see how Wine could make this problematic >< I'm running IMGBurn with Win XP. I can switch it up to Vista if need also. Edited February 10, 2010 by Your Mom's Open Source
mmalves Posted February 10, 2010 Posted February 10, 2010 I 00:39:22 Destination Device: [2:0:0] LITE-ON DVDRW SHW-160P6S PS08 (D:)I 00:39:22 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 00:39:22 Write Speed: MAX I 00:39:22 Optimal L0 Data Zone Capacity: 1,912,976 Update your burner's firmware (boot into Windows for updating). Try all the available write speeds. Try cleaning the drive with a lens cleaning disc. If all that doesn't make it work then please read this. By the way, you should create a .dvd or .mds file (look in ImgBurn's Tools menu) with layerbreak set at 1913760, or else your burned games won't work.
Recommended Posts