Voltorb Posted February 10, 2010 Posted February 10, 2010 I'm using ImgBurn with DVDFab6, and keep getting an error when burning. Specifics from log below. Thanks in advance for your help! I 15:59:12 ImgBurn Version 2.5.0.0 started! I 15:59:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 15:59:12 Total Physical Memory: 3,404,880 KB - Available: 2,895,408 KB I 15:59:12 Initialising SPTI... I 15:59:12 Searching for SCSI / ATAPI devices... I 15:59:12 Found 1 CD-RW and 1 DVD±RW! I 15:59:13 Operation Started! I 15:59:13 Building Image Tree... I 15:59:13 Checking Directory Depth... I 15:59:13 Calculating Totals... I 15:59:13 Preparing Image... I 15:59:13 Checking Path Length... I 15:59:13 Contents: 45 Files, 2 Folders I 15:59:13 Content Type: DVD Video I 15:59:13 Data Type: MODE1/2048 I 15:59:13 File System(s): ISO9660, UDF (1.02) I 15:59:13 Volume Label: MASH I 15:59:13 IFO/BUP 32K Padding: Enabled I 15:59:13 Region Code: 1, 2, 3, 4, 5, 6, 7, 8 I 15:59:13 TV System: NTSC I 15:59:13 Size: 4,509,370,368 bytes I 15:59:13 Sectors: 2,201,841 I 15:59:13 Image Size: 4,510,089,216 bytes I 15:59:13 Image Sectors: 2,202,192 I 15:59:13 Operation Successfully Completed! - Duration: 00:00:00 I 15:59:13 Operation Started! I 15:59:13 Source File: -==/\/[bUILD IMAGE]\/\==- I 15:59:13 Source File Sectors: 2,202,192 (MODE1/2048) I 15:59:13 Source File Size: 4,510,089,216 bytes I 15:59:13 Source File Volume Identifier: MASH I 15:59:13 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 15:59:13 Source File Implementation Identifier: ImgBurn I 15:59:13 Source File File System(s): ISO9660, UDF (1.02) I 15:59:13 Destination Device: [0:1:0] SONY DVD RW DRU-720A JY08 (E:) (ATA) I 15:59:13 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x) I 15:59:13 Destination Media Sectors: 2,298,496 I 15:59:13 Write Mode: DVD I 15:59:13 Write Type: DAO I 15:59:13 Write Speed: 4x I 15:59:13 Link Size: Auto I 15:59:13 Lock Volume: Yes I 15:59:13 Test Mode: No I 15:59:13 OPC: No I 15:59:13 BURN-Proof: Enabled W 15:59:13 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled. E 15:59:21 Failed to lock drive for exclusive access. E 15:59:21 Reason: The handle is invalid. E 15:59:23 Operation Aborted! - Duration: 00:00:07 I 15:59:23 Average Write Rate: N/A - Maximum Write Rate: N/A
mmalves Posted February 10, 2010 Posted February 10, 2010 Update DVDFab to the latest version to see if the problem goes away.
Voltorb Posted February 10, 2010 Author Posted February 10, 2010 Update DVDFab to the latest version to see if the problem goes away. I was running 6218, and updated to 6220, but still have the same problem.
mmalves Posted February 10, 2010 Posted February 10, 2010 In ImgBurn go to Tools -> Settings -> I/O tab, change SPTI - Device Enumeration Method to Device Interface and click OK. Now try burning again and see which program is holding the burner. If it's DVDFab indeed then you may need to disable Lock Volume - Exclusive Access in the Write tab of ImgBurn's settings.
Voltorb Posted February 19, 2010 Author Posted February 19, 2010 I've been away for a few days, but wanted to thank you for your help, It's not an IMGBurn problem as I can burn the folder created by DVDFab after closing DVDFab, but haven't been able to burn directly from Fab. If I uncheck Lock Volume I just get errors writing, so instead of making more coasters, I decided to post on the Fab board. Thanks again for your quick replies! In ImgBurn go to Tools -> Settings -> I/O tab, change SPTI - Device Enumeration Method to Device Interface and click OK. Now try burning again and see which program is holding the burner. If it's DVDFab indeed then you may need to disable Lock Volume - Exclusive Access in the Write tab of ImgBurn's settings.
Recommended Posts