inkk Posted February 11, 2010 Share Posted February 11, 2010 (edited) this is what I get at 53% through the burning process. similar thing happend when I tried to burn Guitar Hero 5 for PS2, also DL disc. My burner with latest firmware: Optiarc DVD RW AD-7200A 1.09 (ATA) I 22:39:09 Operation Started! I 22:39:09 Source File: C:\Downloads\Assassins.Creed.2.PAL.XBOX360-MegaWare\alw-ac2.dvd I 22:39:09 Source File Sectors: 3 827 488 (MODE1/2048) I 22:39:09 Source File Size: 7 838 695 424 bytes I 22:39:09 Source File Volume Identifier: DVD_ROM I 22:39:09 Source File Volume Set Identifier: fd244000MS UDFBridge I 22:39:09 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 22:39:09 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 22:39:09 Source File File System(s): ISO9660; UDF (1.50) I 22:39:09 Destination Device: [0:1:0] Optiarc DVD RW AD-7200A 1.09 (F:) (ATA) I 22:39:09 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x) I 22:39:09 Destination Media Sectors: 4 173 824 I 22:39:09 Write Mode: DVD I 22:39:09 Write Type: DAO I 22:39:09 Write Speed: 2,4x I 22:39:09 Link Size: Auto I 22:39:09 Lock Volume: Yes I 22:39:09 Test Mode: No I 22:39:09 OPC: No I 22:39:09 BURN-Proof: Enabled W 22:39:09 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x) I 22:39:09 Book Type Setting: DVD-ROM I 22:39:09 Optimal L0 Data Zone Capacity: 1 913 760 I 22:39:09 Optimal L0 Data Zone Method: Copied From Original Disc I 22:39:18 Set L0 Data Zone Capacity Succeeded! I 22:39:18 Filling Buffer... (40 MB) I 22:39:19 Writing LeadIn... I 22:39:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 22:39:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 22:39:22 Writing Layer 0... (LBA: 0 - 1913759) I 22:51:17 Writing Layer 1... (LBA: 1913760 - 3827487) W 22:53:03 Failed to Write Sectors 2048224 - 2048255 - Reason: No Seek Complete W 22:53:03 Retrying (1 of 20)... W 22:53:03 Retry Failed - Reason: Write Error and 19 more times. screenshot I think I also set the extra parameters for 360 burning. not sure, because the setting didn't stick. "Disk type: DVD+R DL" "Book type: DVD-ROM" Optiarc DVD RW AD-7200A 1.09 (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete Erasable: No Sessions: 1 Free Sectors: 1 779 296 Free Space: 3 643 998 208 bytes Free Time: 395:25:71 (MM:SS:FF) Supported Write Speeds: 4x; 6x; 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1 913 760 Changeable: No Physical Format Information (ADIP): Disc ID: RICOHJPN-D01-67 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: RICOHJPN-D01-67 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 3827520 (0x003A6740) -> RS: 6 925 KB/s (5x) - WS: 5 540 KB/s (4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 3827520 (0x003A6740) -> RS: 11 080 KB/s (8x) - WS: 8 310 KB/s (6x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 3827520 (0x003A6740) -> RS: 11 080 KB/s (8x) - WS: 11 080 KB/s (8x) Edited February 11, 2010 by inkk Link to comment Share on other sites More sharing options...
Cynthia Posted February 11, 2010 Share Posted February 11, 2010 I have the same burner and 4x (the same as 2.4x as you selected) burning is a joke with that media code. Use 6x and it should work. Link to comment Share on other sites More sharing options...
inkk Posted February 12, 2010 Author Share Posted February 12, 2010 I have the same burner and 4x (the same as 2.4x as you selected) burning is a joke with that media code. Use 6x and it should work. oh, ok. thanks for the info. heard 4x was optiumum. I'll try when my new DVD:s arrive. I used up my last two on two tries with different speeds. well same speed but didn't know 2.4x wouldn't work until I saw the log. I'll get back to you when I tried. Link to comment Share on other sites More sharing options...
Recommended Posts