Newcomer Posted February 16, 2010 Posted February 16, 2010 I've been using IMGBurn successfully for some time, up to the end of last week. Now, in the panel which lists my two burners, I see only "0-0-0" instead of the drive letters. I'm sure there's a simple answer to this but after an hour of fiddling I can't find it. Anyone know where the burner s disappear to?
LIGHTNING UK! Posted February 16, 2010 Posted February 16, 2010 Copy + paste everything from the log window please.
Newcomer Posted February 17, 2010 Author Posted February 17, 2010 Copy + paste everything from the log window please. ImgBurn Version 2.5.0.0 - Log ; Wednesday, 17 February 2010, 10:08:50 ; \\****************************************// ; ; I 10:06:37 ImgBurn Version 2.5.0.0 started! I 10:06:37 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 10:06:37 Total Physical Memory: 1,046,960 KB - Available: 404,652 KB W 10:06:37 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 10:06:37 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 10:06:37 Initialising SPTI... I 10:06:37 Searching for SCSI / ATAPI devices... I 10:06:37 Found 1 DVD±RW and 1 DVD±RW/RAM! I 10:08:49 Close Request Acknowledged I 10:08:49 Closing Down... I 10:08:50 Shutting down SPTI... I 10:08:50 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Tuesday, 16 February 2010, 12:40:01 ; \\****************************************// ; ; I 11:45:17 ImgBurn Version 2.5.0.0 started! I 11:45:17 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 11:45:17 Total Physical Memory: 1,046,960 KB - Available: 585,760 KB W 11:45:17 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 11:45:17 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 11:45:17 Initialising SPTI... I 11:45:17 Searching for SCSI / ATAPI devices... I 11:45:17 Found 1 DVD±RW and 1 DVD±RW/RAM! I 12:38:22 Searching for SCSI / ATAPI devices... I 12:38:22 Found 1 DVD±RW and 1 DVD±RW/RAM! I 12:40:01 Close Request Acknowledged I 12:40:01 Closing Down... I 12:40:01 Shutting down SPTI... I 12:40:01 ImgBurn closed! The main panel meanwhile shows the source drive only as (0-0-0).I have checked both drives with another DVD (to play it not copy) and they're operating normally.
LIGHTNING UK! Posted February 17, 2010 Posted February 17, 2010 Press the F8 key once ImgBurn has loaded, then tell it to search for drives again. You should get loads more stuff in the log. Save the log to a file (via the File -> Save As menu option) and attach it in your reply please.
Newcomer Posted February 18, 2010 Author Posted February 18, 2010 Copy + paste everything from the log window please.
Newcomer Posted February 18, 2010 Author Posted February 18, 2010 I got no results when I tried F8 together with various options. Log file attached. Thanks for your help. ImgBurn.log
LIGHTNING UK! Posted February 18, 2010 Posted February 18, 2010 I see no problem in that log, it lists the full address/name/drive letter/connection type of your drives just fine. I 16:28:27 [0:0:0] _NEC DVD_RW ND-3550A 1.05 (D:) (ATA)I 16:28:46 [0:0:0] HL-DT-ST DVDRAM GSA-E40L SE02 (F:) (USB) The 0:0:0 is not important, and in any case, 0:0:0 is a perfectly legit address for a drive. All USB drives will show up as 0:0:0 because they don't technically have a SCSI address at all (or not where the OS is concerned anyway).
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now