millkman Posted February 19, 2010 Posted February 19, 2010 hello chaps thanks for a great piece of software......... right, here i go, i have had lots of problems of late, i recently bought a new pc from aldi (nice) a medion, i have lots of bad burns from this pc so i changed the LG writer back to my trusty old pioneer 115, still had problems, disks sticking, jumping etc etc so, i bought a brand spanking new pioneer 118 but things only got worse, i am unable to even write the lead in................. ahhhhhhhhhh i am using ritek go5 pidata disk (used these before in lod pc with no problems !!) any ways have att the log any suggestions gratefully received............... ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Friday, 19 February 2010, 15:58:56 ; \\****************************************// ; ; I 15:57:27 ImgBurn Version 2.5.0.0 started! I 15:57:27 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 15:57:27 Total Physical Memory: 4,193,592 KB - Available: 2,961,000 KB I 15:57:27 Initialising SPTI... I 15:57:27 Searching for SCSI / ATAPI devices... I 15:58:41 Found 1 DVD±RW/RAM! I 15:58:56 Close Request Acknowledged I 15:58:56 Closing Down... I 15:58:56 Shutting down SPTI... I 15:58:56 ImgBurn closed! ;
Cynthia Posted February 19, 2010 Posted February 19, 2010 That log you posted is not from a burn. Look at the old logs: Main Menu -> Help -> ImgBurn Logs
millkman Posted February 19, 2010 Author Posted February 19, 2010 That log you posted is not from a burn. Look at the old logs: Main Menu -> Help -> ImgBurn Logs Actually it is in fact its still hanging from 16.22 this afternoon !!!!!!!!!!!!!!!! Tried to write lead in and failed , tried to abort and its is still hanging ?
Cynthia Posted February 19, 2010 Posted February 19, 2010 Sound as it could be an issue with the motherboards chipset drivers. You have the latest ones installed?
millkman Posted February 19, 2010 Author Posted February 19, 2010 Sound as it could be an issue with the motherboards chipset drivers. You have the latest ones installed? Pc is only a month old, so as far as i know yes, not really that good on pc's......... have checked device managaer and everything seems ok ?????????? Any suggestions gratefully received thank you
Cynthia Posted February 19, 2010 Posted February 19, 2010 When you inserted the 118 and 115, You checked the the jumper back on the drive was set right? (Master/Slave/Cable Select).
millkman Posted February 19, 2010 Author Posted February 19, 2010 When you inserted the 118 and 115, You checked the the jumper back on the drive was set right? (Master/Slave/Cable Select). ermmmmmmm its a sata drive , thought it didn't matter ? only ide ? or am really really wrong ? thanks
Cynthia Posted February 19, 2010 Posted February 19, 2010 118 and 115 are PATA drives. Sure you don't mean 215 and 218?
millkman Posted February 19, 2010 Author Posted February 19, 2010 Yers 218 my mistake , very sorry well have Dl and applied a Bios update nad re-installed imgburn
Cynthia Posted February 19, 2010 Posted February 19, 2010 You could use SIW to see what chip set drivers there is in your computer. http://www.gtopala.com/ Then in the main menu Hardware -> Motherboard
millkman Posted February 21, 2010 Author Posted February 21, 2010 Sorry for the late reply, crashed my car in the snow yesterday....................... i took your advice and there was 2 downloads from th Medion website for my pc as soon as i installed these updates the dvd writer was recognised and imgburn began the burn so, hopefully with your help i am up and running, thank you ever so much for your time and efforts...
Recommended Posts