erriezeeka Posted February 20, 2010 Share Posted February 20, 2010 (edited) i tried to burn a xbox360 game (iso file) for the first time but i got a error at 67%. i selected a NEC drive because i could'nt select a Sony drive. The NEC drive was the only one where i could select DVD-rom. it says: and this is my log: I 14:04:07 ImgBurn Version 2.5.0.0 started! I 14:04:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:04:07 Total Physical Memory: 3.407.020 KB - Available: 2.778.432 KB W 14:04:07 SPTD can have a detrimental effect on drive performance. I 14:04:07 Initialising SPTI... I 14:04:07 Searching for SCSI / ATAPI devices... I 14:04:07 Found 1 DVD±RW and 4 BD-ROM/HD DVD-ROMs! I 14:07:23 Operation Started! I 14:07:23 Source File: C:\Documents and Settings\Rick\Bureaublad\rick\Dragonball Z\cvn-dbrbj.dvd I 14:07:23 Source File Sectors: 3.827.488 (MODE1/2048) I 14:07:23 Source File Size: 7.838.695.424 bytes I 14:07:23 Source File Volume Identifier: DVD_ROM I 14:07:23 Source File Volume Set Identifier: fd244000MS UDFBridge I 14:07:23 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:07:23 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:07:23 Source File File System(s): ISO9660; UDF (1.50) I 14:07:23 Destination Device: [2:0:0] Optiarc DVD RW AD-5200A 1.05 (E:) (ATA) I 14:07:23 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x) I 14:07:23 Destination Media Sectors: 4.173.824 I 14:07:23 Write Mode: DVD I 14:07:23 Write Type: DAO I 14:07:23 Write Speed: 2,4x I 14:07:23 Link Size: Auto I 14:07:23 Lock Volume: Yes I 14:07:23 Test Mode: No I 14:07:23 OPC: No I 14:07:23 BURN-Proof: Enabled W 14:07:23 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) I 14:07:23 Book Type Setting: DVD-ROM I 14:07:23 User Specified L0 Data Zone Capacity: 1.913.760 I 14:07:31 Set L0 Data Zone Capacity Succeeded! I 14:07:31 Filling Buffer... (40 MB) I 14:07:32 Writing LeadIn... I 14:07:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 14:07:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 14:07:35 Writing Layer 0... (LBA: 0 - 1913759) I 14:19:28 Writing Layer 1... (LBA: 1913760 - 3827487) I 14:31:28 Synchronising Cache... I 14:31:29 Closing Track... I 14:31:44 Finalising Disc... I 14:32:32 Exporting Graph Data... I 14:32:32 Graph Data File: C:\Documents and Settings\Rick\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5200A_1.05_ZATERDAG-20-FEBRUARI-2010_14-07_RITEK-S04-66_2,4x.ibg I 14:32:32 Export Successfully Completed! I 14:32:32 Operation Successfully Completed! - Duration: 00:25:08 I 14:32:32 Average Write Rate: 5.341 KB/s (3.9x) - Maximum Write Rate: 5.800 KB/s (4.2x) I 14:32:32 Cycling Tray before Verify... W 14:32:40 Waiting for device to become ready... I 14:32:52 Device Ready! I 14:32:55 Operation Started! I 14:32:55 Source Device: [2:0:0] Optiarc DVD RW AD-5200A 1.05 (E:) (ATA) I 14:32:55 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x) I 14:32:55 Image File: C:\Documents and Settings\Rick\Bureaublad\rick\Dragonball Z\cvn-dbrbj.dvd I 14:32:55 Image File Sectors: 3.827.488 (MODE1/2048) I 14:32:55 Image File Size: 7.838.695.424 bytes I 14:32:55 Image File Volume Identifier: DVD_ROM I 14:32:55 Image File Volume Set Identifier: fd244000MS UDFBridge I 14:32:55 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:32:55 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 14:32:55 Image File File System(s): ISO9660; UDF (1.50) I 14:32:55 Read Speed (Data/Audio): MAX / MAX I 14:32:55 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 14:32:55 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 14:32:55 Verifying Layer 0... (LBA: 0 - 1913759) I 14:38:40 Verifying Layer 1... (LBA: 1913760 - 3827487) W 14:40:17 Failed to Read Sector 2572512 - Reason: Unrecovered Read Error W 14:47:13 Retrying (1)... W 14:47:14 Retry Failed - Reason: Unrecovered Read Error E 14:49:00 Failed to Read Sector 2572512 - Reason: Unrecovered Read Error E 14:49:01 Failed to Verify Sectors! I 14:49:01 Exporting Graph Data... I 14:49:01 Graph Data File: C:\Documents and Settings\Rick\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5200A_1.05_ZATERDAG-20-FEBRUARI-2010_14-07_RITEK-S04-66_2,4x.ibg I 14:49:01 Export Successfully Completed! E 14:49:01 Operation Failed! - Duration: 00:16:05 I 14:49:01 Average Verify Rate: 5.331 KB/s (3.8x) - Maximum Verify Rate: 15.911 KB/s (11.5x) can anyone help my? Edited February 20, 2010 by erriezeeka Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 There is a later firmware to install. http://www.firmwarehq.com/Optiarc/AD-5200A/files.html The slowest speed you can burn with is 4x on that media. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 i've eddited my first post with these sentences:"i selected a NEC drive because i could'nt select a Sony drive. The NEC drive was the only one where i could select DVD-rom". but you're saying that i have to update my firmware and set the speed to 4x? and what about the drives? i can't select a Sony drive. Only NEC works??? Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 I 14:04:07 Found 1 DVD±RW and 4 BD-ROM/HD DVD-ROMs! Assuming that the 4 later ones are some type of virtual drives? The Sony drive - is that a burner? If so, can you see it in Windows Device Manager? The speed 4x is the lowest you can use. If you select 2.4x it will use 4x. 6x and 8x are also possible to use. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 yeah. those are virtual drives. and the Sony is a burner yes. the only one in fact. and yes i can see it in windows device manager. Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 So in Device Manager there is only one burner - the Sony? Or you can see both two? Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 i can see this: Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 i can see this: I 14:07:23 Destination Device: [2:0:0] Optiarc DVD RW AD-5200A 1.05 (E:) (ATA) So the Sony is the one you are using in the posted log. Optiarc = Sony + NEC The NEC drive was the only one where i could select DVD-rom. I guess you went into the book type settings and set DVD +R DL to DVD-ROM? You shouldn't needed that extra step as Optiarcs book type that media by default. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 the following steps i followed: write image file to disc --> tools --> settings --> tab-write --> user specified --> i typed in 1913760 --> ok --> book type settings --> NEC --> change for: Drive (for DVD+R DL Media)--> new settings: DVD-Rom --> ok --> burn disc. this is the way a friend told me to follow. what did i do wrong? Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 the following steps i followed: write image file to disc --> tools --> settings --> tab-write --> user specified --> i typed in 1913760 --> ok --> book type settings --> NEC --> change for: Drive (for DVD+R DL Media)--> new settings: DVD-Rom --> ok --> burn disc. this is the way a friend told me to follow. what did i do wrong? Nothing. But you could have skipped the book type step as the model of burner you have sets it to DVD-ROM by default when you burn +R DL media. But no problem. After the update of firmware. Try to burn at the three available speeds, if the fist one should still give you errors. If all three speeds fails, then your burner simply don't support that media code very well. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 so the best thing to do now is set the speed to 4x and skip the book type thing? i just don't want to screw up another dual layer:) Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 If you used the non temporary setting in the book type setting, it stays to DVD-ROM until you flash the drive with a new firmware. If you want to be really sure. Set the book type to DVD-ROM after you updated the firmware to 1.09. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 so i have to select NEC and than i have to select DVD-ROM? Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 Yes, the NEC tab is also for your Optiarc burner. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 god damn. now i get this: wtf do i wrong Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 I guess that was the 4x speed and you got a reading error during the verify part. Only thing is to try 6x and 8x. If that also fails, get better media or a drive that supports that media. Ritek is tricky to burn with older drives. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 yes this was the 4x speed. i'm using platunum dual layer disc's. those are the best dual layer discs available (i guess) and a friend of my always uses these for xbox 360 games. what should i do. 6x or 8x? i only have 1 disc left:P Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 I guess your friend have another model of burner? 8x is what I would try with. Link to comment Share on other sites More sharing options...
erriezeeka Posted February 20, 2010 Author Share Posted February 20, 2010 yeah i guess so. mayby it's better to try it on a other pc? Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2010 Share Posted February 20, 2010 If it works on your friends PC, then yes. Link to comment Share on other sites More sharing options...
Recommended Posts