csummit Posted February 21, 2010 Posted February 21, 2010 Hi, I was wondering if someone could help me to narrow down what my problem is or at least point me in a direction. I have been burning cd and dvd with this system with no problems. I heard that image burn was a great program so I installed it and gave it a try. I like the program but I now get "Failed to Write Sectors 9376 - 9407 - Reason: A device attached to the system is not functioning" many times when I burn with it. The write retry works fine and the burns seem to function. Do I have a problem or is this some bogus error message? What could cause this? I get the error message no matter what drive I use in this computer. I have anydvd off. Below is the log before I stopped it about 2 minutes into the burn. Any help would be great. Thanks I 13:06:50 ImgBurn Version 2.5.0.0 started! I 13:06:50 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 13:06:50 Total Physical Memory: 1,048,032 KB - Available: 655,108 KB W 13:06:50 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 13:06:50 Initialising SPTI... I 13:06:50 Searching for SCSI / ATAPI devices... I 13:07:03 Found 1 DVD-ROM and 1 DVD±RW! I 13:11:37 Operation Started! I 13:11:37 Source File: I:\000 wii\Guitar Hero Metallica.iso I 13:11:37 Source File Sectors: 2,294,912 (MODE1/2048) I 13:11:37 Source File Size: 4,699,979,776 bytes I 13:11:37 Source File Volume Identifier: Guitar Hero Metallica I 13:11:37 Source File File System(s): Special I 13:11:37 Destination Device: [1:1:0] LITE-ON DVDRW SOHW-1673S JS0D (H:) (ATA) I 13:11:37 Destination Media Type: DVD-RW (Disc ID: RITEKW04) (Speeds: 4x) I 13:11:37 Destination Media Sectors: 2,297,888 I 13:11:37 Write Mode: DVD I 13:11:37 Write Type: DAO I 13:11:37 Write Speed: 2x I 13:11:37 Link Size: Auto I 13:11:37 Lock Volume: Yes I 13:11:37 Test Mode: No I 13:11:37 OPC: No I 13:11:37 BURN-Proof: Enabled W 13:11:37 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x) I 13:11:37 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes I 13:11:40 Filling Buffer... (40 MB) I 13:11:42 Writing LeadIn... I 13:12:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 13:12:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) W 13:12:21 Failed to Write Sectors 9248 - 9279 - Reason: A device attached to the system is not functioning. W 13:12:21 Retrying (1 of 20)... I 13:12:21 Writing Sectors... W 13:12:21 Failed to Write Sectors 9280 - 9311 - Reason: A device attached to the system is not functioning. W 13:12:21 Retrying (1 of 20)... I 13:12:21 Writing Sectors... W 13:12:21 Failed to Write Sectors 9376 - 9407 - Reason: A device attached to the system is not functioning. W 13:12:21 Retrying (1 of 20)... I 13:12:21 Writing Sectors... W 13:12:29 Failed to Write Sectors 31392 - 31423 - Reason: A device attached to the system is not functioning. W 13:12:29 Retrying (1 of 20)... I 13:12:29 Writing Sectors... W 13:12:29 Failed to Write Sectors 31424 - 31455 - Reason: A device attached to the system is not functioning. W 13:12:29 Retrying (1 of 20)... I 13:12:30 Writing Sectors... W 13:12:30 Failed to Write Sectors 31520 - 31551 - Reason: A device attached to the system is not functioning. W 13:12:30 Retrying (1 of 20)... I 13:12:30 Writing Sectors... I 13:12:34 Abort Request Acknowledged
mmalves Posted February 21, 2010 Posted February 21, 2010 Plug the burner as Master and only device at the end of a good 80-wire IDE cable. Also look for updated storage drivers for your controller (hint: use SIW to identify them).
Recommended Posts