Strogg Posted February 28, 2010 Share Posted February 28, 2010 (edited) Hi,everyone.I need help ! I want burn some mkv files(totaly 7.87GB) into DVD+R DL disc (brand is Verbatim and ANV).But I got an error at start of burning.it says:"Set L0 Data Zone Failed! Reason:Power Calibration Area Error". then I put an empty disk and burn again..... I'v tried this 3 times. in the last time, it start burn correctly,but after few minutes,an I/O error occured. There always some damn error occured when I burn D9 disk, it drove me crazy. does anyone have an idea to solve this problem ? Thank you! almost forgot,my ODD is Pioneer DVR-115 Firmware version is 1.22 I 14:49:42 ImgBurn Version 2.5.0.0 started! I 14:49:42 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 14:49:42 Total Physical Memory: 2,096,432 KB - Available: 1,277,052 KB W 14:49:42 SPTD can have a detrimental effect on drive performance. I 14:49:42 Initialising SPTI... I 14:49:42 Searching for SCSI / ATAPI devices... I 14:49:42 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 14:49:52 Operation Started! I 14:49:52 Building Image Tree... I 14:49:52 Checking Directory Depth... I 14:49:52 Calculating Totals... I 14:49:52 Preparing Image... I 14:49:52 Checking Path Length... I 14:49:53 Contents: 29 Files, 0 Folders I 14:49:53 Content Type: Data I 14:49:53 Data Type: MODE1/2048 I 14:49:53 File System(s): ISO9660, UDF (1.02) I 14:49:53 Volume Label: [Not Configured] I 14:49:53 Size: 8,457,311,159 bytes I 14:49:53 Sectors: 4,129,562 I 14:49:53 Image Size: 8,457,977,856 bytes I 14:49:53 Image Sectors: 4,129,872 I 14:49:53 Operation Successfully Completed! - Duration: 00:00:00 I 14:50:58 Operation Started! I 14:50:58 Building Image Tree... I 14:50:58 Checking Directory Depth... I 14:50:58 Calculating Totals... I 14:50:58 Preparing Image... I 14:50:58 Checking Path Length... I 14:50:58 Contents: 29 Files, 0 Folders I 14:50:58 Content Type: Data I 14:50:58 Data Type: MODE1/2048 I 14:50:58 File System(s): ISO9660, UDF (1.02) I 14:50:58 Volume Label: FMP！- TSR I 14:50:59 Size: 8,457,311,159 bytes I 14:50:59 Sectors: 4,129,562 I 14:50:59 Image Size: 8,457,977,856 bytes I 14:50:59 Image Sectors: 4,129,872 I 14:51:00 Operation Successfully Completed! - Duration: 00:00:02 I 14:51:00 Operation Started! I 14:51:00 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:51:00 Source File Sectors: 4,129,872 (MODE1/2048) I 14:51:00 Source File Size: 8,457,977,856 bytes I 14:51:00 Source File Volume Identifier: FMP！- TSR I 14:51:00 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 14:51:00 Source File Implementation Identifier: ImgBurn I 14:51:00 Source File File System(s): ISO9660, UDF (1.02) I 14:51:00 Destination Device: [0:0:0] PIONEER DVD-RW DVR-115 1.22 (J:) (ATA) I 14:51:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) I 14:51:00 Destination Media Sectors: 4,173,824 I 14:51:00 Write Mode: DVD I 14:51:00 Write Type: DAO I 14:51:00 Write Speed: MAX I 14:51:00 Link Size: Auto I 14:51:00 Lock Volume: Yes I 14:51:00 Test Mode: No I 14:51:00 OPC: No I 14:51:00 BURN-Proof: Enabled I 14:51:00 Advanced Settings - Optimal Writing Speed: No I 14:51:00 Optimal L0 Data Zone Capacity: 2,064,944 I 14:51:00 Optimal L0 Data Zone Method: ECC Block Boundary I 14:51:28 Set L0 Data Zone Capacity Succeeded! I 14:51:28 Filling Buffer... (40 MB) I 14:51:29 Writing LeadIn... I 14:51:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 4129871) I 14:51:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4129871) I 14:51:40 Writing Layer 0... (LBA: 0 - 2064943) W 14:54:25 Failed to Write Sectors 511424 - 511455 - Reason: Write Error W 14:54:25 Retrying (1 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (2 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (3 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (4 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (5 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (6 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (7 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (8 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (9 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (10 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (11 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (12 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (13 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (14 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (15 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (16 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (17 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (18 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (19 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write W 14:54:28 Retrying (20 of 20)... W 14:54:28 Retry Failed - Reason: Invalid Address For Write E 15:11:15 Failed to Write Sectors 511424 - 511455 - Reason: Write Error E 15:11:15 Next Writable Address: 510656 I 15:11:16 Synchronising Cache... W 15:11:27 User opted to skip the 'Close Track/Session/Disc' functions. E 15:11:27 Failed to Write Image! I 15:11:27 Exporting Graph Data... I 15:11:27 Graph Data File: C:\Users\Administrator\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER DVD-RW DVR-115 1.22 2010年2月28日 14-51 MKM-003-00 MAX.ibg I 15:11:27 Export Successfully Completed! E 15:11:27 Operation Failed! - Duration: 00:20:26 I 15:11:27 Average Write Rate: 870 KB/s (0.6x) - Maximum Write Rate: 8,383 KB/s (6.1x) Edited February 28, 2010 by Strogg Link to comment Share on other sites More sharing options...
Strogg Posted February 28, 2010 Author Share Posted February 28, 2010 this is the Power Calibration Area Error I 14:14:10 ImgBurn Version 2.5.0.0 started! I 14:14:10 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 14:14:10 Total Physical Memory: 2,096,432 KB - Available: 1,388,608 KB W 14:14:10 SPTD can have a detrimental effect on drive performance. I 14:14:10 Initialising SPTI... I 14:14:10 Searching for SCSI / ATAPI devices... I 14:14:10 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 14:16:07 Operation Started! I 14:16:07 Building Image Tree... I 14:16:08 Checking Directory Depth... I 14:16:08 Calculating Totals... I 14:16:08 Preparing Image... I 14:16:08 Checking Path Length... I 14:16:08 Contents: 29 Files, 0 Folders I 14:16:08 Content Type: Data I 14:16:08 Data Type: MODE1/2048 I 14:16:08 File System(s): ISO9660, UDF (1.02) I 14:16:08 Volume Label: FMP！- TSR I 14:16:08 Size: 8,457,311,159 bytes I 14:16:08 Sectors: 4,129,562 I 14:16:08 Image Size: 8,457,977,856 bytes I 14:16:08 Image Sectors: 4,129,872 I 14:16:08 Operation Successfully Completed! - Duration: 00:00:00 I 14:17:56 Operation Started! I 14:17:56 Building Image Tree... I 14:17:56 Checking Directory Depth... I 14:17:56 Calculating Totals... I 14:17:56 Preparing Image... I 14:17:56 Checking Path Length... I 14:17:56 Contents: 29 Files, 0 Folders I 14:17:56 Content Type: Data I 14:17:56 Data Type: MODE1/2048 I 14:17:56 File System(s): ISO9660, UDF (1.02) I 14:17:56 Volume Label: FMP！- TSR I 14:17:56 Size: 8,457,311,159 bytes I 14:17:56 Sectors: 4,129,562 I 14:17:56 Image Size: 8,457,977,856 bytes I 14:17:56 Image Sectors: 4,129,872 I 14:17:56 Operation Successfully Completed! - Duration: 00:00:00 I 14:20:42 Operation Started! I 14:20:42 Building Image Tree... I 14:20:42 Checking Directory Depth... I 14:20:42 Calculating Totals... I 14:20:42 Preparing Image... I 14:20:42 Checking Path Length... I 14:20:42 Contents: 29 Files, 0 Folders I 14:20:42 Content Type: Data I 14:20:42 Data Type: MODE1/2048 I 14:20:42 File System(s): ISO9660, UDF (1.02) I 14:20:42 Volume Label: FMP！- TSR I 14:20:42 Size: 8,457,311,159 bytes I 14:20:42 Sectors: 4,129,562 I 14:20:42 Image Size: 8,457,977,856 bytes I 14:20:42 Image Sectors: 4,129,872 I 14:20:48 Operation Successfully Completed! - Duration: 00:00:06 I 14:20:48 Operation Started! I 14:20:48 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:20:48 Source File Sectors: 4,129,872 (MODE1/2048) I 14:20:48 Source File Size: 8,457,977,856 bytes I 14:20:48 Source File Volume Identifier: FMP！- TSR I 14:20:48 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 14:20:48 Source File Implementation Identifier: ImgBurn I 14:20:48 Source File File System(s): ISO9660, UDF (1.02) I 14:20:48 Destination Device: [0:0:0] PIONEER DVD-RW DVR-115 1.22 (J:) (ATA) I 14:20:48 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) I 14:20:48 Destination Media Sectors: 4,173,824 I 14:20:48 Write Mode: DVD I 14:20:48 Write Type: DAO I 14:20:48 Write Speed: MAX I 14:20:48 Link Size: Auto I 14:20:48 Lock Volume: Yes I 14:20:48 Test Mode: No I 14:20:48 OPC: No I 14:20:48 BURN-Proof: Enabled I 14:20:48 Advanced Settings - Optimal Writing Speed: No I 14:20:48 Optimal L0 Data Zone Capacity: 2,064,944 I 14:20:48 Optimal L0 Data Zone Method: ECC Block Boundary W 14:27:42 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 14:27:42 Waiting for device to become ready... I 14:28:42 Abort Request Acknowledged W 14:28:42 Retrying (1)... E 14:28:42 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 14:28:42 Operation Failed! - Duration: 00:07:53 I 14:28:42 Average Write Rate: N/A - Maximum Write Rate: N/A I 14:30:27 Close Request Acknowledged I 14:30:27 Closing Down... I 14:30:27 Shutting down SPTI... I 14:30:27 ImgBurn closed! Link to comment Share on other sites More sharing options...
Cynthia Posted February 28, 2010 Share Posted February 28, 2010 I have the same drive and media and all the supported write speeds should work without issues. I would test to clean the laser head with a cleaning disc or something else. Can you also check on the package where the discs are made? Tawian/China/Singapore/Malaysia? I 14:20:48 OPC: No Could be worth a try to enable it. That setting works with that drive. Link to comment Share on other sites More sharing options...
Strogg Posted February 28, 2010 Author Share Posted February 28, 2010 (edited) I have the same drive and media and all the supported write speeds should work without issues. I would test to clean the laser head with a cleaning disc or something else. Can you also check on the package where the discs are made? Tawian/China/Singapore/Malaysia? I 14:20:48 OPC: No Could be worth a try to enable it. That setting works with that drive. Thank you for reply. Disc's speed is 8x,but I don't know what exactly the DVR-115's speed for D9. disc is made in Singapore and What is the OPC means? Edited February 28, 2010 by Strogg Link to comment Share on other sites More sharing options...
mmalves Posted February 28, 2010 Share Posted February 28, 2010 I 14:20:48 Destination Device: [0:0:0] PIONEER DVD-RW DVR-115 1.22 (J:) (ATA)I 14:20:48 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) I 14:20:48 Write Speed: MAX These are the supported write speeds by your burner with those blanks. This information is also shown in ImgBurn's window. Notice that by using MAX write speed your burning is using 10x on those 8x rated blanks, which is overspeeding and could be the cause of the failure. Set the write speed to 8x or 6x and it should work better. Link to comment Share on other sites More sharing options...
Strogg Posted February 28, 2010 Author Share Posted February 28, 2010 I 14:20:48 Destination Device: [0:0:0] PIONEER DVD-RW DVR-115 1.22 (J:) (ATA)I 14:20:48 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x, 10x) I 14:20:48 Write Speed: MAX These are the supported write speeds by your burner with those blanks. This information is also shown in ImgBurn's window. Notice that by using MAX write speed your burning is using 10x on those 8x rated blanks, which is overspeeding and could be the cause of the failure. Set the write speed to 8x or 6x and it should work better. Thank you,I will try it.by the way what's the difference between Max and AWS ? Link to comment Share on other sites More sharing options...
Cynthia Posted February 28, 2010 Share Posted February 28, 2010 If you haven configured AWS - it's the same as MAX. http://forum.imgburn.com/index.php?showtopic=4249 Link to comment Share on other sites More sharing options...
Strogg Posted February 28, 2010 Author Share Posted February 28, 2010 (edited) If you haven configured AWS - it's the same as MAX. http://forum.imgburn.com/index.php?showtopic=4249 I have enabled OPC and set the speed as 6X,but still got the same I/O Error. Mybe I should buy a new writer... (This wasted me 5 piece of DVD+R DL Disk ) Edited February 28, 2010 by Strogg Link to comment Share on other sites More sharing options...
Cynthia Posted February 28, 2010 Share Posted February 28, 2010 True. If it starts to crap out on good media, it's a sign of a dying burner. It could still be worth a try with a cleaning. Link to comment Share on other sites More sharing options...
Recommended Posts