whilly2dope Posted March 3, 2010 Posted March 3, 2010 I am trying to burn my xbox 360 games out. it works sometimes, but sometimes I get this: I 12:00:35 ImgBurn Version 2.5.0.0 started! I 12:00:35 Microsoft Windows Vista Ultimate Edition (6.0, Build 6002 : Service Pack 2, v.113) I 12:00:35 Total Physical Memory: 3 078 588 KB - Available: 1 672 768 KB W 12:00:35 SPTD can have a detrimental effect on drive performance. I 12:00:35 Initialising SPTI... I 12:00:35 Searching for SCSI / ATAPI devices... I 12:00:35 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 12:00:44 Operation Started! I 12:00:44 Source File: C:\Users\Villelarsson\Documents\PROGRAM\Mx_Vs_Atv_Reflex_XBOX360-SPARE\sp-mxvs.dvd I 12:00:44 Source File Sectors: 3 827 488 (MODE1/2048) I 12:00:44 Source File Size: 7 838 695 424 bytes I 12:00:44 Source File Volume Identifier: DVD_ROM I 12:00:44 Source File Volume Set Identifier: fd244000MS UDFBridge I 12:00:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:00:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:00:44 Source File File System(s): ISO9660; UDF (1.50) I 12:00:44 Destination Device: [4:0:0] Optiarc DVD RW AD-7203A 1.01 (D:) (SCSI) I 12:00:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x) I 12:00:44 Destination Media Sectors: 4 173 824 I 12:00:44 Write Mode: DVD I 12:00:44 Write Type: DAO I 12:00:44 Write Speed: 2,4x I 12:00:44 Link Size: Auto I 12:00:44 Lock Volume: Yes I 12:00:44 Test Mode: No I 12:00:44 OPC: No I 12:00:44 BURN-Proof: Enabled W 12:00:44 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x) I 12:00:44 Book Type Setting: DVD-ROM I 12:00:44 Optimal L0 Data Zone Capacity: 1 913 760 I 12:00:44 Optimal L0 Data Zone Method: Copied From Original Disc W 12:00:49 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Is Full I 12:00:49 Filling Buffer... (22 MB) I 12:00:49 Writing LeadIn... W 12:00:49 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (1 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (2 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (3 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (4 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (5 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (6 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (7 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (8 of 20)... W 12:00:49 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:49 Retrying (9 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (10 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (11 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (12 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (13 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (14 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (15 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (16 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (17 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (18 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (19 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full W 12:00:50 Retrying (20 of 20)... W 12:00:50 Retry Failed - Reason: Power Calibration Area Is Full E 12:01:05 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full I 12:01:05 Synchronising Cache... W 12:01:06 User opted to skip the 'Close Track/Session/Disc' functions. E 12:01:06 Failed to Write Image! E 12:01:06 Operation Failed! - Duration: 00:00:22 I 12:01:06 Average Write Rate: N/A - Maximum Write Rate: N/A
Cynthia Posted March 3, 2010 Posted March 3, 2010 There is a later firmware version. http://www.firmwarehq.com/Optiarc/AD-7203A/files.html Ritek based DL media usually works best with 8x write speed on that drive. The speed you used (4x) craps out on my AD-7200A.
whilly2dope Posted March 3, 2010 Author Posted March 3, 2010 http://forum.imgburn.com/index.php?showtopic=8000 thank you mmalves
whilly2dope Posted March 3, 2010 Author Posted March 3, 2010 There is a later firmware version. http://www.firmwarehq.com/Optiarc/AD-7203A/files.html Ritek based DL media usually works best with 8x write speed on that drive. The speed you used (4x) craps out on my AD-7200A. I see, so its the "quality" of the disks that are causing this? Cause.. Ive been burning since I was like 13yo(20yo now), but you know, burning xbox360 games is on a way higher level of "burning experience". And Ive looked around and snapped up words like "ritek" etc. but instore I can never find that information! I was at the local "clasohlson" here in sweden and I found 2 diffrent labels of dl but the information it had to offer was the same so I took the more expensive
whilly2dope Posted March 3, 2010 Author Posted March 3, 2010 There is a later firmware version. http://www.firmwarehq.com/Optiarc/AD-7203A/files.html Ritek based DL media usually works best with 8x write speed on that drive. The speed you used (4x) craps out on my AD-7200A. How do you think this work? http://www.clasohlson.co.uk/Product/Product.aspx?id=145346109 this is the one of the two in the store that I didnt buy. And this is the one I did buy: http://www.clasohlson.co.uk/Product/Product.aspx?id=82870783
LIGHTNING UK! Posted March 3, 2010 Posted March 3, 2010 If it doesn't say Verbatim on the tub, don't buy it.
whilly2dope Posted March 3, 2010 Author Posted March 3, 2010 If it doesn't say Verbatim on the tub, don't buy it. okey, and thats not your own opinion?
whilly2dope Posted March 3, 2010 Author Posted March 3, 2010 Would it matter if it was?! Well yeah, that could mean that you prefer them because youve allways used them and they allways did work. Or yourself, your father or anyone related to you works with creating verbatim or something like that wich makes you support them. Or they might work good with your drive but not with mine, I dont know But if its a fact that Verbatims are the best ones, and that could be the solution for my problem! I will definitly buy em today!
whilly2dope Posted March 3, 2010 Author Posted March 3, 2010 Thank you all! I bought Verbatim DVD+R DL and tried it. works just perfect!
LIGHTNING UK! Posted March 3, 2010 Posted March 3, 2010 *That* is why we recommend them... because people like you come on here saying you're having issues burning (what turns out to be ritek/ricoh/cmc) DL discs, you then try out some Verbatim (MKM dye) ones and report back that they're fine. We see this time and time and time again - and that's why I wrote the 'pinned' topic (you were linked to it in post 2) in the first place.
Cynthia Posted March 3, 2010 Posted March 3, 2010 Didn't knew we had exported Clas Ohlson. Those Traxdata are Ritek based.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now