neilb78 Posted March 3, 2010 Posted March 3, 2010 ok been burning dual layer for a few months no problems at all then suddenly did a couple of films and end of the film was cut off checked log and kept getting this log i get the same thing with verbatum dics as well so know it aint them updated firmware on me driver its driving me nuts every single download went smooth before but know dual layer just stopped working i am hoping its something simple im doing wrong thanks in advance I 20:39:32 Operation Started! I 20:39:32 Building Image Tree... I 20:39:35 Calculating Totals... I 20:39:35 Preparing Image... I 20:39:35 Contents: 1 File, 0 Folders I 20:39:35 Content Type: Data I 20:39:35 Data Type: MODE1/2048 I 20:39:35 File System(s): UDF (1.02) I 20:39:35 Volume Label: My Documents I 20:39:35 Size: 4,891,559,780 bytes I 20:39:35 Sectors: 2,388,457 I 20:39:35 Image Size: 4,892,098,560 bytes I 20:39:35 Image Sectors: 2,388,720 I 20:39:44 Operation Successfully Completed! - Duration: 00:00:11 I 20:39:44 Operation Started! I 20:39:44 Source File: -==/\/[bUILD IMAGE]\/\==- I 20:39:44 Source File Sectors: 2,388,720 (MODE1/2048) I 20:39:44 Source File Size: 4,892,098,560 bytes I 20:39:44 Source File Volume Identifier: My Documents I 20:39:44 Source File Application Identifier: ImgBurn v2.5.0.0 I 20:39:44 Source File Implementation Identifier: ImgBurn I 20:39:44 Source File File System(s): UDF (1.02) I 20:39:44 Destination Device: [1:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (G:) (ATA) I 20:39:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x) I 20:39:44 Destination Media Sectors: 4,173,824 I 20:39:44 Write Mode: DVD I 20:39:44 Write Type: DAO I 20:39:44 Write Speed: MAX I 20:39:44 Link Size: Auto I 20:39:44 Lock Volume: Yes I 20:39:44 Test Mode: No I 20:39:44 OPC: No I 20:39:44 BURN-Proof: Enabled I 20:39:44 Book Type Setting: DVD-ROM I 20:39:44 Optimal L0 Data Zone Capacity: 1,194,368 I 20:39:44 Optimal L0 Data Zone Method: ECC Block Boundary I 20:39:44 Set L0 Data Zone Capacity Succeeded! I 20:39:44 Filling Buffer... (20 MB) I 20:39:45 Writing LeadIn... I 20:39:57 Abort Request Acknowledged I 20:40:20 Synchronising Cache... W 20:41:11 User opted to skip the 'Close Track/Session/Disc' functions. E 20:41:11 Failed to Write Image! E 20:41:11 Operation Failed! - Duration: 00:01:27 I 20:41:11 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
mmalves Posted March 3, 2010 Posted March 3, 2010 That log is incomplete. By the way, you can find the previous logs in ImgBurn's Help menu.
neilb78 Posted March 3, 2010 Author Posted March 3, 2010 ok been burning dual layer for a few months no problems at all then suddenly did a couple of films and end of the film was cut off checked log and kept getting this log i get the same thing with verbatum dics as well so know it aint them updated firmware on me driver its driving me nuts every single download went smooth before but know dual layer just stopped working i am hoping its something simple im doing wrong thanks in advance I 20:49:54 ImgBurn Version 2.5.0.0 started! I 20:49:54 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 20:49:54 Total Physical Memory: 523,756 KB - Available: 179,584 KB W 20:49:54 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 20:49:54 Initialising SPTI... I 20:49:54 Searching for SCSI / ATAPI devices... E 20:49:54 Device->Initialise() Failed! E 20:49:54 Device: [1:1:0] (G:) (ATA) E 20:49:54 This drive is currently locked for exclusive access by 'ImgBurn v2.5.0.0 - PID: 3252'. E 20:49:54 Device->Initialise() Failed! E 20:49:54 Device: [1:1:0] (G:) (ATA) E 20:49:54 This drive will not be visible in the program. I 20:49:55 Found 1 DVD±RW! I 22:07:30 Close Request Acknowledged I 22:07:30 Closing Down... I 22:07:43 Shutting down SPTI... I 22:07:43 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Wednesday, 24 February 2010, 22:07:41 ; \\****************************************// ; ; I 20:48:13 ImgBurn Version 2.5.0.0 started! I 20:48:13 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 20:48:13 Total Physical Memory: 523,756 KB - Available: 237,652 KB W 20:48:13 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 20:48:13 Initialising SPTI... I 20:48:13 Searching for SCSI / ATAPI devices... I 20:48:13 Found 1 DVD±RW and 1 DVD±RW/RAM! I 20:48:51 Operation Started! I 20:48:51 Building Image Tree... I 20:48:51 Checking Directory Depth... I 20:48:51 Calculating Totals... I 20:48:51 Preparing Image... E 20:48:51 File size exceeds the limit imposed by the ISO9660 file system. E 20:48:51 Name: C:\Documents and Settings\morgan\My Documents\Blow.mpg E 20:48:51 Size: 4,891,559,780 bytes E 20:48:57 Operation Failed! - Duration: 00:00:06 I 20:49:04 Operation Started! I 20:49:04 Building Image Tree... I 20:49:04 Calculating Totals... I 20:49:05 Preparing Image... I 20:49:05 Contents: 1 File, 0 Folders I 20:49:05 Content Type: Data I 20:49:05 Data Type: MODE1/2048 I 20:49:05 File System(s): UDF (1.02) I 20:49:05 Volume Label: [Not Configured] I 20:49:05 Size: 4,891,559,780 bytes I 20:49:05 Sectors: 2,388,457 I 20:49:05 Image Size: 4,892,098,560 bytes I 20:49:05 Image Sectors: 2,388,720 I 20:49:05 Operation Successfully Completed! - Duration: 00:00:00 I 20:49:10 Operation Started! I 20:49:10 Building Image Tree... I 20:49:12 Calculating Totals... I 20:49:12 Preparing Image... I 20:49:12 Contents: 1 File, 0 Folders I 20:49:12 Content Type: Data I 20:49:12 Data Type: MODE1/2048 I 20:49:12 File System(s): UDF (1.02) I 20:49:12 Volume Label: My Documents I 20:49:12 Size: 4,891,559,780 bytes I 20:49:12 Sectors: 2,388,457 I 20:49:12 Image Size: 4,892,098,560 bytes I 20:49:12 Image Sectors: 2,388,720 I 20:49:14 Operation Successfully Completed! - Duration: 00:00:03 I 20:49:14 Operation Started! I 20:49:14 Source File: -==/\/[bUILD IMAGE]\/\==- I 20:49:14 Source File Sectors: 2,388,720 (MODE1/2048) I 20:49:14 Source File Size: 4,892,098,560 bytes I 20:49:14 Source File Volume Identifier: My Documents I 20:49:14 Source File Application Identifier: ImgBurn v2.5.0.0 I 20:49:14 Source File Implementation Identifier: ImgBurn I 20:49:14 Source File File System(s): UDF (1.02) I 20:49:14 Destination Device: [1:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.02 (G:) (ATA) I 20:49:14 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x) I 20:49:14 Destination Media Sectors: 4,173,824 I 20:49:14 Write Mode: DVD I 20:49:14 Write Type: DAO I 20:49:14 Write Speed: MAX I 20:49:14 Link Size: Auto I 20:49:14 Lock Volume: Yes I 20:49:14 Test Mode: No I 20:49:14 OPC: No I 20:49:14 BURN-Proof: Enabled I 20:49:14 Book Type Setting: DVD-ROM I 20:49:14 Optimal L0 Data Zone Capacity: 1,194,368 I 20:49:14 Optimal L0 Data Zone Method: ECC Block Boundary I 20:49:14 Set L0 Data Zone Capacity Succeeded! I 20:49:14 Filling Buffer... (20 MB) I 20:49:15 Writing LeadIn... I 20:49:19 Abort Request Acknowledged I 20:49:48 Synchronising Cache... W 20:50:39 User opted to skip the 'Close Track/Session/Disc' functions. E 20:50:39 Failed to Write Image! E 20:50:39 Operation Failed! - Duration: 00:01:25 I 20:50:39 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 22:07:24 Close Request Acknowledged I 22:07:24 Closing Down... I 22:07:33 Shutting down SPTI... I 22:07:34 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Tuesday, 23 February 2010, 18:47:21 ; \\****************************************// ; ; I 18:47:01 ImgBurn Version 2.5.0.0 started! I 18:47:01 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 18:47:01 Total Physical Memory: 523,756 KB - Available: 246,108 KB W 18:47:01 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 18:47:01 Initialising SPTI... I 18:47:01 Searching for SCSI / ATAPI devices... I 18:47:01 Found 1 DVD±RW and 1 DVD±RW/RAM! I 18:47:16 Operation Started! I 18:47:16 Building Image Tree... E 18:47:18 User did not specify a volume label. E 18:47:18 Operation Aborted! - Duration: 00:00:01 I 18:47:19 Operation Started! I 18:47:19 Building Image Tree... I 18:47:19 Checking Directory Depth... I 18:47:19 Calculating Totals... I 18:47:19 Preparing Image... I 18:47:19 Checking Path Length... I 18:47:19 Contents: 1 File, 0 Folders I 18:47:19 Content Type: Data I 18:47:19 Data Type: MODE1/2048 I 18:47:19 File System(s): ISO9660, UDF (1.02) I 18:47:19 Volume Label: [Not Configured] I 18:47:19 Size: 4,203,098,516 bytes I 18:47:19 Sectors: 2,052,295 I 18:47:19 Image Size: 4,203,675,648 bytes I 18:47:19 Image Sectors: 2,052,576 I 18:47:19 Operation Successfully Completed! - Duration: 00:00:00 I 18:47:21 Close Request Acknowledged I 18:47:21 Closing Down... I 18:47:21 Shutting down SPTI... I 18:47:21 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Saturday, 20 February 2010, 19:46:53 ; \\****************************************// ; ; I 19:36:53 ImgBurn Version 2.5.0.0 started! I 19:36:53 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 19:36:53 Total Physical Memory: 523,756 KB - Available: 166,496 KB W 19:36:54 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 19:36:54 Initialising SPTI... I 19:36:54 Searching for SCSI / ATAPI devices... I 19:36:54 Found 1 DVD±RW and 1 DVD±RW/RAM! I 19:37:24 Operation Started! I 19:37:24 Building Image Tree... I 19:37:24 Checking Directory Depth... I 19:37:24 Calculating Totals... I 19:37:24 Preparing Image... I 19:37:24 Checking Path Length... I 19:37:24 Contents: 1 File, 0 Folders I 19:37:24 Content Type: Data I 19:37:24 Data Type: MODE1/2048 I 19:37:24 File System(s): ISO9660, UDF (1.02) I 19:37:24 Volume Label: [Not Configured] I 19:37:24 Size: 4,203,098,516 bytes I 19:37:24 Sectors: 2,052,295 I 19:37:24 Image Size: 4,203,675,648 bytes I 19:37:24 Image Sectors: 2,052,576 I 19:37:24 Operation Successfully Completed! - Duration: 00:00:00 I 19:37:27 Operation Started! I 19:37:27 Building Image Tree... I 19:37:29 Checking Directory Depth... I 19:37:29 Calculating Totals... I 19:37:29 Preparing Image... I 19:37:29 Checking Path Length... I 19:37:29 Contents: 1 File, 0 Folders I 19:37:29 Content Type: Data I 19:37:29 Data Type: MODE1/2048 I 19:37:29 File System(s): ISO9660, UDF (1.02) I 19:37:29 Volume Label: My Documents I 19:37:29 Size: 4,203,098,516 bytes I 19:37:29 Sectors: 2,052,295 I 19:37:29 Image Size: 4,203,675,648 bytes I 19:37:29 Image Sectors: 2,052,576 I 19:37:31 Operation Successfully Completed! - Duration: 00:00:03 I 19:37:31 Operation Started! I 19:37:31 Source File: -==/\/[bUILD IMAGE]\/\==- I 19:37:31 Source File Sectors: 2,052,576 (MODE1/2048) I 19:37:31 Source File Size: 4,203,675,648 bytes I 19:37:31 Source File Volume Identifier: My Documents I 19:37:31 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 19:37:31 Source File Implementation Identifier: ImgBurn I 19:37:31 Source File File System(s): ISO9660, UDF (1.02) I 19:37:31 Destination Device: [1:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.02 (G:) (ATA) I 19:37:31 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 8x, 12x, 16x) I 19:37:31 Destination Media Sectors: 2,297,888 I 19:37:31 Write Mode: DVD I 19:37:31 Write Type: DAO I 19:37:31 Write Speed: MAX I 19:37:31 Link Size: Auto I 19:37:31 Lock Volume: Yes I 19:37:31 Test Mode: No I 19:37:31 OPC: No I 19:37:31 BURN-Proof: Enabled I 19:37:32 Filling Buffer... (20 MB) I 19:37:32 Writing LeadIn... I 19:37:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 2052575) I 19:37:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2052575) I 19:42:30 Synchronising Cache... I 19:42:55 Exporting Graph Data... I 19:42:55 Graph Data File: C:\Documents and Settings\morgan\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.02_20-FEBRUARY-2010_19-37_RITEKF1_MAX.ibg I 19:42:55 Export Successfully Completed! I 19:42:55 Operation Successfully Completed! - Duration: 00:05:15 I 19:42:55 Average Write Rate: 14,557 KB/s (10.5x) - Maximum Write Rate: 21,293 KB/s (15.4x) I 19:46:52 Close Request Acknowledged I 19:46:52 Closing Down... I 19:46:53 Shutting down SPTI... I 19:46:53 ImgBurn closed!
mmalves Posted March 3, 2010 Posted March 3, 2010 Those logs only show you aborting a dual-layer burn right at the beginning and a single-layer burn. Please read this entirely -> http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts