pete146 Posted March 5, 2010 Posted March 5, 2010 Hi, i have burnt many DL 360 backups with img burn using aone disks in the past but have not done so in a few months. I have just attempted to burn the last few days and have had the same error repeatedly, and i know it is not the image i am burning because i have tried different images and the same error occurs at 94% of finalising the disk. I am unsure of what the problem is as it has always burnt fine in the past. I have the latest firware for my drive btw, and i have tried burning at 2.4x and 4x and 8x all to no avail. any help appreciated. I have included two logs with the same problem occuring. here are my logs: 1. I 12:21:03 ImgBurn Version 2.5.0.0 started! I 12:21:03 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 12:21:03 Total Physical Memory: 8,387,704 KB - Available: 6,823,224 KB I 12:21:03 Initialising SPTI... I 12:21:03 Searching for SCSI / ATAPI devices... I 12:21:09 Found 1 DVD±RW/RAM! I 12:21:32 Operation Started! I 12:21:32 Source File: C:\Users\erbcds\Documents\hhegsta\kehsud\images\aaabd.dvd I 12:21:32 Source File Sectors: 3,827,488 (MODE1/2048) I 12:21:32 Source File Size: 7,838,695,424 bytes I 12:21:32 Source File Volume Identifier: XGD2DVD_NTSC I 12:21:32 Source File Volume Set Identifier: 34672923 I 12:21:32 Source File Implementation Identifier: Sonic Scenarist 3.1 I 12:21:32 Source File File System(s): ISO9660, UDF (1.02) I 12:21:32 Destination Device: [1:0:0] PLDS DVD+-RW DH-16A6S YD12 (E:) (ATA) I 12:21:32 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 12:21:32 Destination Media Sectors: 4,173,824 I 12:21:32 Write Mode: DVD I 12:21:32 Write Type: DAO I 12:21:32 Write Speed: 2.4x I 12:21:32 Link Size: Auto I 12:21:32 Lock Volume: Yes I 12:21:32 Test Mode: No I 12:21:32 OPC: No I 12:21:32 BURN-Proof: Enabled W 12:21:32 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 12:21:32 Optimal L0 Data Zone Capacity: 1,913,760 I 12:21:32 Optimal L0 Data Zone Method: Copied From Original Disc I 12:22:58 Set L0 Data Zone Capacity Succeeded! I 12:22:59 Filling Buffer... (40 MB) I 12:22:59 Writing LeadIn... I 12:23:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:23:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 12:23:01 Writing Layer 0... (LBA: 0 - 1913759) I 12:34:49 Writing Layer 1... (LBA: 1913760 - 3827487) I 12:46:38 Synchronising Cache... I 12:46:47 Closing Track... I 12:46:51 Finalising Disc... W 12:47:05 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:47:05 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 12:47:05 Retrying (1 of 3)... W 12:47:20 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:47:20 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 12:47:20 Retrying (2 of 3)... W 12:47:34 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:47:34 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 12:47:34 Retrying (3 of 3)... W 12:47:53 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:47:53 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 12:48:48 Retrying (4)... W 12:49:03 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:49:03 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 12:50:51 Retrying (5)... W 12:51:07 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:51:07 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 12:51:45 Retrying (6)... W 12:52:00 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 12:52:00 Retry Failed - Reason: Session Fixation Error Writing Lead Out I 13:07:00 Exporting Graph Data... I 13:07:00 Graph Data File: C:\Users\erbcds\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVD+-RW_DH-16A6S_YD12_05-MARCH-2010_12-21_RICOHJPN-D01-67_2.4x.ibg I 13:07:00 Export Successfully Completed! I 13:07:00 Operation Successfully Completed! - Duration: 00:45:25 I 13:07:00 Average Write Rate: 5,402 KB/s (3.9x) - Maximum Write Rate: 5,566 KB/s (4.0x) 2. I 13:29:29 ImgBurn Version 2.5.0.0 started! I 13:29:29 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 13:29:29 Total Physical Memory: 8,387,704 KB - Available: 6,755,608 KB I 13:29:29 Initialising SPTI... I 13:29:29 Searching for SCSI / ATAPI devices... I 13:29:29 Found 1 DVD±RW/RAM! I 13:38:27 Operation Started! I 13:38:27 Source File: C:\Users\erbcds\Documents\hhegsta\kehsud\images\gshh4.dvd I 13:38:27 Source File Sectors: 3,827,488 (MODE1/2048) I 13:38:27 Source File Size: 7,838,695,424 bytes I 13:38:27 Source File Volume Identifier: XGD2DVD_NTSC I 13:38:27 Source File Volume Set Identifier: 34672923 I 13:38:27 Source File Implementation Identifier: Sonic Scenarist 3.1 I 13:38:27 Source File File System(s): ISO9660, UDF (1.02) I 13:38:27 Destination Device: [1:0:0] PLDS DVD+-RW DH-16A6S YD12 (E:) (ATA) I 13:38:27 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 13:38:27 Destination Media Sectors: 4,173,824 I 13:38:27 Write Mode: DVD I 13:38:27 Write Type: DAO I 13:38:27 Write Speed: 4x I 13:38:27 Link Size: Auto I 13:38:27 Lock Volume: Yes I 13:38:27 Test Mode: No I 13:38:27 OPC: No I 13:38:27 BURN-Proof: Enabled I 13:38:27 Optimal L0 Data Zone Capacity: 1,913,760 I 13:38:27 Optimal L0 Data Zone Method: Copied From Original Disc I 13:39:23 Set L0 Data Zone Capacity Succeeded! I 13:39:23 Filling Buffer... (40 MB) I 13:39:25 Writing LeadIn... I 13:39:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:39:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:39:27 Writing Layer 0... (LBA: 0 - 1913759) I 13:51:15 Writing Layer 1... (LBA: 1913760 - 3827487) I 14:03:04 Synchronising Cache... I 14:03:09 Closing Track... I 14:03:12 Finalising Disc... W 14:03:26 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 14:03:26 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 14:03:26 Retrying (1 of 3)... W 14:03:40 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 14:03:40 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 14:03:40 Retrying (2 of 3)... W 14:03:54 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 14:03:54 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 14:03:54 Retrying (3 of 3)... W 14:04:09 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 14:04:09 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 14:16:05 Retrying (4)... W 14:16:22 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 14:16:22 Retry Failed - Reason: Session Fixation Error Writing Lead Out I 14:16:25 Exporting Graph Data... I 14:16:26 Graph Data File: C:\Users\erbcds\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVD+-RW_DH-16A6S_YD12_05-MARCH-2010_13-38_RICOHJPN-D01-67_4x.ibg I 14:16:26 Export Successfully Completed! I 14:16:26 Operation Successfully Completed! - Duration: 00:37:58 I 14:16:26 Average Write Rate: 5,402 KB/s (3.9x) - Maximum Write Rate: 5,566 KB/s (4.0x) I 14:16:26 Cycling Tray before Verify... W 14:16:33 Waiting for device to become ready... I 14:18:35 Abort Request Acknowledged E 14:18:35 Device Not Ready - Reason: Medium Not Present - Tray Closed
pete146 Posted March 5, 2010 Author Posted March 5, 2010 http://forum.imgburn.com/index.php?showtopic=8000 i appreciate you taking the time to respond, thanks. However i already read that post, i make a habit of checking stickies etc before posting new posts that are already answered. without sounding rude, all that post tells me is that basically that a lot of imgburn problems are down to the quality of the disk, which would not explain why imgburn has only started to show this error recently and not when i used the same disks from the same batch and successfully burnt backups preiviously. As i said i appreciate the response and if you mean to say that this error is common and certainly due to the disk quality then i shall have to try some verbatims or similar, or are you simply saying that you do not know what the problem is in this instance, but buying some new disks is worth a try? Pete
mmalves Posted March 5, 2010 Posted March 5, 2010 Yes, Verbatim makes the best dual layer media you can get, but maybe you missed this bit from that sticky: Before splashing out on new (better/more expensive) media, you might like to consider your options:Update the firmware on your drive. Try cleaning the drive with a cleaning disc (or if you're feeling confident, take it apart and clean it manually). Try burning your current media at all of the write speeds your drive says it supports for that MID (look in the disc info text on the right of the main screen to see what they are). Avoid using slimline laptop style drives - in general, they're rubbish. Buy a new drive that supports your current media better/properly (this is still going to be a bit hit and miss). You already have the latest firmware for your burner, so that's one option you can scratch.
pete146 Posted March 5, 2010 Author Posted March 5, 2010 Yes, Verbatim makes the best dual layer media you can get, but maybe you missed this bit from that sticky: Before splashing out on new (better/more expensive) media, you might like to consider your options:Update the firmware on your drive. Try cleaning the drive with a cleaning disc (or if you're feeling confident, take it apart and clean it manually). Try burning your current media at all of the write speeds your drive says it supports for that MID (look in the disc info text on the right of the main screen to see what they are). Avoid using slimline laptop style drives - in general, they're rubbish. Buy a new drive that supports your current media better/properly (this is still going to be a bit hit and miss). You already have the latest firmware for your burner, so that's one option you can scratch. ok thanks i shall take note of that list. do you know what exactly the "Session Fixation Error Writing Lead Out" means, like why it would have that error and what that corresponds to, or is it just a random error? thanks again pete
Cynthia Posted March 5, 2010 Posted March 5, 2010 You are using the same write speed both in logpost 1 and 2 (=4x). Tried the 6x and 8x speeds?
mmalves Posted March 5, 2010 Posted March 5, 2010 Session fixation is the end of the burning process and it's all done by the burner itself: ImgBurn just sends the command and waits for the drive to do it and report success or failure.
pete146 Posted March 5, 2010 Author Posted March 5, 2010 You are using the same write speed both in logpost 1 and 2 (=4x). Tried the 6x and 8x speeds? the first one i set 2.4x and it corrected it to 4x, i tried 6x and 8x aswell.
Cynthia Posted March 5, 2010 Posted March 5, 2010 If all available speeds fails with that media code, I think you should focus on Verbatim discs or replace the drive with one that likes that media code. Aone changed media code recently, the discs you are trying to burn now, are they from an old package that you have used before and then it worked (those months ago)?
pete146 Posted March 5, 2010 Author Posted March 5, 2010 If all available speeds fails with that media code, I think you should focus on Verbatim discs or replace the drive with one that likes that media code. Aone changed media code recently, the discs you are trying to burn now, are they from an old package that you have used before and then it worked (those months ago)? yes it was the same packet i am half way through they did work preiously. i have updated to windows 7 since, do you think that would affect it?
Cynthia Posted March 5, 2010 Posted March 5, 2010 That doesn't affect the burning process. IMHO it could do if the mother board drivers are not good.
mmalves Posted March 5, 2010 Posted March 5, 2010 IMHO it could do if the mother board drivers are not good. Bad drivers usually freeze the computer or stall the burning process. It's very unlikely that they would return an error that is specific to the MMC standard for burning optical discs.
pete146 Posted March 5, 2010 Author Posted March 5, 2010 I'm just going to put it down to the disks, and try and burn it on another system. thanks for the help pete
Recommended Posts