IslandGPS Posted March 17, 2010 Posted March 17, 2010 I keep getting the following errors when trying to burn a DVD fom an ISO file, any help appreciated: I 21:37:45 ImgBurn Version 2.5.1.0 started! I 21:37:45 Microsoft Windows Vista Business Edition (6.0, Build 6002 : Service Pack 2) I 21:37:45 Total Physical Memory: 3,135,152 KB - Available: 1,452,576 KB I 21:37:45 Initialising SPTI... I 21:37:45 Searching for SCSI / ATAPI devices... I 21:37:46 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-852S 1.80 (F:) (ATA) I 21:37:46 Found 1 DVD±RW/RAM! I 21:46:12 Operation Started! I 21:46:12 Source File: C:\Users\Rob Marshall\Desktop\LandRover\NAV_LANDROVER_2009-2010\NAV_LANDROVER_2009-2010.iso I 21:46:12 Source File Sectors: 3,620,048 (MODE1/2048) I 21:46:12 Source File Size: 7,413,858,304 bytes I 21:46:12 Source File Volume Identifier: 464110-7560 I 21:46:12 Source File Application Identifier: Session Offset : 0 VTC Sector Offset: 0 I 21:46:12 Source File Implementation Identifier: Smart Storage, Inc. I 21:46:12 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 21:46:12 Destination Device: [1:0:0] MATSHITA DVD-RAM UJ-852S 1.80 (F:) (ATA) I 21:46:12 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) I 21:46:12 Destination Media Sectors: 4,173,824 I 21:46:12 Write Mode: DVD I 21:46:12 Write Type: DAO I 21:46:12 Write Speed: 2.4x I 21:46:12 Link Size: Auto I 21:46:12 Lock Volume: Yes I 21:46:12 Test Mode: No I 21:46:12 OPC: No I 21:46:12 BURN-Proof: Enabled I 21:46:12 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 21:46:13 Optimal L0 Data Zone Capacity: 1,810,032 I 21:46:13 Optimal L0 Data Zone Method: ECC Block Boundary W 21:52:51 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 21:52:51 Retrying (1)... W 21:52:54 Retry Failed - Reason: Invalid Field in CDB W 21:52:54 Retrying (2)... W 21:52:55 Retry Failed - Reason: Invalid Field in CDB W 21:52:55 Retrying (3)... W 21:52:56 Retry Failed - Reason: Invalid Field in CDB W 21:52:56 Retrying (4)... E 21:54:03 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB E 21:54:03 Operation Failed! - Duration: 00:07:50 I 21:54:03 Average Write Rate: N/A - Maximum Write Rate: N/A
mmalves Posted March 17, 2010 Posted March 17, 2010 Try burning at 4x. You could try a lens cleaning disc on that burner too. If it doesn't help then try with the 2.4x Verbatim blanks if you can find them.
clenchdwarf Posted March 18, 2010 Posted March 18, 2010 (edited) Maybe try extracting the files from the image, and let Imgburn build and burn. That should give Imgburn a chance to fix anything that's sketchy. I assume you've burned DL successfully before, and have the latest firmware revision on the writer. Edited March 18, 2010 by clenchdwarf
Cynthia Posted March 18, 2010 Posted March 18, 2010 He/She is using a DL disc. I 21:46:12 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x)
Recommended Posts