Problem burning DVD

[IslandGPS]

I keep getting the following errors when trying to burn a DVD fom an ISO file, any help appreciated:

 

I 21:37:45 ImgBurn Version 2.5.1.0 started!

I 21:37:45 Microsoft Windows Vista Business Edition (6.0, Build 6002 : Service Pack 2)

I 21:37:45 Total Physical Memory: 3,135,152 KB - Available: 1,452,576 KB

I 21:37:45 Initialising SPTI...

I 21:37:45 Searching for SCSI / ATAPI devices...

I 21:37:46 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-852S 1.80 (F:) (ATA)

I 21:37:46 Found 1 DVD±RW/RAM!

I 21:46:12 Operation Started!

I 21:46:12 Source File: C:\Users\Rob Marshall\Desktop\LandRover\NAV_LANDROVER_2009-2010\NAV_LANDROVER_2009-2010.iso

I 21:46:12 Source File Sectors: 3,620,048 (MODE1/2048)

I 21:46:12 Source File Size: 7,413,858,304 bytes

I 21:46:12 Source File Volume Identifier: 464110-7560

I 21:46:12 Source File Application Identifier: Session Offset : 0 VTC Sector Offset: 0

I 21:46:12 Source File Implementation Identifier: Smart Storage, Inc.

I 21:46:12 Source File File System(s): ISO9660, Joliet, UDF (1.02)

I 21:46:12 Destination Device: [1:0:0] MATSHITA DVD-RAM UJ-852S 1.80 (F:) (ATA)

I 21:46:12 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x)

I 21:46:12 Destination Media Sectors: 4,173,824

I 21:46:12 Write Mode: DVD

I 21:46:12 Write Type: DAO

I 21:46:12 Write Speed: 2.4x

I 21:46:12 Link Size: Auto

I 21:46:12 Lock Volume: Yes

I 21:46:12 Test Mode: No

I 21:46:12 OPC: No

I 21:46:12 BURN-Proof: Enabled

I 21:46:12 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 21:46:13 Optimal L0 Data Zone Capacity: 1,810,032

I 21:46:13 Optimal L0 Data Zone Method: ECC Block Boundary

W 21:52:51 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

W 21:52:51 Retrying (1)...

W 21:52:54 Retry Failed - Reason: Invalid Field in CDB

W 21:52:54 Retrying (2)...

W 21:52:55 Retry Failed - Reason: Invalid Field in CDB

W 21:52:55 Retrying (3)...

W 21:52:56 Retry Failed - Reason: Invalid Field in CDB

W 21:52:56 Retrying (4)...

E 21:54:03 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 21:54:03 Operation Failed! - Duration: 00:07:50

I 21:54:03 Average Write Rate: N/A - Maximum Write Rate: N/A

[mmalves]

Try burning at 4x. You could try a lens cleaning disc on that burner too. If it doesn't help then try with the 2.4x Verbatim blanks if you can find them.

[clenchdwarf]

Maybe try extracting the files from the image, and let Imgburn build and burn. That should give Imgburn a chance to fix anything that's sketchy. I assume you've burned DL successfully before, and have the latest firmware revision on the writer.

Edited March 18, 2010 by clenchdwarf

[Cynthia]

He/She is using a DL disc.

 

I 21:46:12 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x)