Hellequin Posted March 24, 2010 Share Posted March 24, 2010 I installed windows 7 64bit edition. I downloaded IMGBurn 2.5.1.0, selected an image and tried to burn to a DVD. The process showed it completed fine; however the disc is still blank. My computer recognizes the disc, but shows it as blank. Any idea why IMGBurn would show it has been burned but the DVD stays blank? Thank you, Link to comment Share on other sites More sharing options...
mmalves Posted March 24, 2010 Share Posted March 24, 2010 Post the log of that burn (look in ImgBurn's Help menu). Link to comment Share on other sites More sharing options...
Hellequin Posted March 24, 2010 Author Share Posted March 24, 2010 Post the log of that burn (look in ImgBurn's Help menu). I 09:32:18 ImgBurn Version 2.5.1.0 started! I 09:32:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 09:32:18 Total Physical Memory: 4,192,308 KB - Available: 2,481,504 KB W 09:32:18 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 09:32:18 Initialising SPTI... I 09:32:18 Searching for SCSI / ATAPI devices... I 09:32:20 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-L632H D400 (D:) (ATA) I 09:32:20 -> Drive 2 - Info: BMLOVGH D2VG1MRO1U 1.03 (H:) (SCSI) I 09:32:20 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 09:32:42 Operation Started! I 09:32:42 Source File: C:\Downloads\JDownload\Windows_XP_SP3_Pro_Gamer_Edition_v2_Nov_2009.iso I 09:32:42 Source File Sectors: 531,424 (MODE1/2048) I 09:32:42 Source File Size: 1,088,356,352 bytes I 09:32:42 Source File Volume Identifier: xp.sp3.gamers I 09:32:42 Source File File System(s): ISO9660 (Bootable), Joliet I 09:32:42 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-L632H D400 (D:) (ATA) I 09:32:42 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 3x, 4x, 6x, 8x) I 09:32:42 Destination Media Sectors: 2,297,888 I 09:32:42 Write Mode: DVD I 09:32:42 Write Type: DAO I 09:32:42 Write Speed: MAX I 09:32:42 Link Size: Auto I 09:32:42 Lock Volume: Yes I 09:32:42 Test Mode: No I 09:32:42 OPC: No I 09:32:42 BURN-Proof: Enabled I 09:32:42 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 09:32:43 Filling Buffer... (40 MB) I 09:32:43 Writing LeadIn... I 09:33:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 531423) I 09:33:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 531423) I 09:50:38 Synchronising Cache... I 09:51:17 Exporting Graph Data... I 09:51:17 Graph Data File: C:\Users\Paul\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-L632H_D400_WEDNESDAY-MARCH-24-2010_9-32_AM_RITEKF1_MAX.ibg I 09:51:17 Export Successfully Completed! I 09:51:17 Operation Successfully Completed! - Duration: 00:18:34 I 09:51:17 Average Write Rate: 1,026 KB/s (0.7x) - Maximum Write Rate: 6,598 KB/s (4.8x) I 09:51:17 Cycling Tray before Verify... W 09:51:42 Waiting for device to become ready... I 09:52:09 Device Ready! E 09:52:09 Verify Failed! - Reason: Layouts do not match. I 10:11:53 Close Request Acknowledged I 10:11:53 Closing Down... I 10:11:53 Shutting down SPTI... I 10:11:53 ImgBurn closed! Link to comment Share on other sites More sharing options...
mmalves Posted March 24, 2010 Share Posted March 24, 2010 I 09:32:42 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-L632H D400 (D:) (ATA) Update your burner's firmware and try burning again. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 24, 2010 Share Posted March 24, 2010 Blame your drive, it messed up burning the (low quality 'RITEKF1' dye) discs you're using. If the firmware doesn't fix it, invest in some better discs - Verbatim or Taiyo Yuden. You could also try cleaning the drive with a cleaning disc. Link to comment Share on other sites More sharing options...
Hellequin Posted March 24, 2010 Author Share Posted March 24, 2010 I 09:32:42 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-L632H D400 (D:) (ATA) Update your burner's firmware and try burning again. thank you that worked I appreciate your help Link to comment Share on other sites More sharing options...
Recommended Posts