NavCore Posted March 24, 2010 Share Posted March 24, 2010 (edited) Hello everyone !!! I'm new to this forum and I salute you all !!! My OS is Windows 7 x86 and DVD writter --> Pioneer DVR-216D, but I crossflashed firmware, so it's now DVR-216L . . . I'm using ImgBurn everyday and I didn't have any problems with burning. I have one ISO image file that I need to burn with ImgBurn. When I start burning, I get one warning: W Write type: TAO I tried to burn image on my other computer where I have Windows XP installed and LG DVD writter. It burns CD without this warning message ? There are the same "default" ImgBurn settings on both computers. My log file is: I 16:28:38 ImgBurn Version 2.5.1.0 started! I 16:28:38 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 16:28:38 Total Physical Memory: 2.096.240 KB - Available: 1.173.976 KB I 16:28:38 Initialising SPTI... I 16:28:38 Searching for SCSI / ATAPI devices... I 16:28:38 -> Drive 1 - Info: PIONEER DVD-RW DVR-216L 1.09 (F:) (ATA) I 16:28:38 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 16:28:38 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:28:49 Operation Started! I 16:28:49 Source File: [it doesn't mather] I 16:28:49 Source File Sectors: 41 (MODE1/2048) I 16:28:49 Source File Size: 83.968 bytes I 16:28:49 Source File Volume Identifier: 20091008_2120 I 16:28:49 Source File File System(s): ISO9660; Joliet I 16:28:49 Destination Device: [3:0:0] PIONEER DVD-RW DVR-216L 1.09 (F:) (ATA) I 16:28:49 Destination Media Type: CD-R (Disc ID: 97m34s23f, Mitsubishi Chemical Corp.) (Speeds: 4x; 10x; 16x; 24x; 32x; 40x) I 16:28:49 Destination Media Sectors: 359.846 I 16:28:49 Write Mode: CD I 16:28:49 Write Type: SAO I 16:28:49 Write Speed: 4x I 16:28:49 Lock Volume: Yes I 16:28:49 Test Mode: No I 16:28:49 OPC: No I 16:28:49 BURN-Proof: Enabled I 16:28:49 Write Speed Successfully Set! - Effective: 705 KB/s (4x) I 16:28:49 Advanced Settings - Optimal Writing Speed: No W 16:28:51 Write Type: TAO I 16:28:51 Filling Buffer... (40 MB) I 16:28:51 Writing LeadIn... I 16:28:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 40) I 16:28:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 40) I 16:28:54 Synchronising Cache... I 16:29:05 Closing Track... I 16:29:07 Closing Session... I 16:30:09 Exporting Graph Data... I 16:30:09 Graph Data File: [it doesn't mather] I 16:30:09 Export Successfully Completed! I 16:30:09 Operation Successfully Completed! - Duration: 00:01:19 I 16:30:09 Average Write Rate: N/A - Maximum Write Rate: N/A I 16:30:09 Cycling Tray before Verify... I 16:30:28 Device Ready! I 16:30:28 Operation Started! I 16:30:28 Source Device: [3:0:0] PIONEER DVD-RW DVR-216L 1.09 (F:) (ATA) I 16:30:28 Source Media Type: CD-ROM (Speeds: 4x; 10x; 16x; 24x; 32x; 40x) I 16:30:28 Image File: [it doesn't mather] I 16:30:28 Image File Sectors: 41 (MODE1/2048) I 16:30:28 Image File Size: 83.968 bytes I 16:30:28 Image File Volume Identifier: 20091008_2120 I 16:30:28 Image File File System(s): ISO9660; Joliet I 16:30:28 Read Speed (Data/Audio): MAX / MAX I 16:30:29 Verifying Session 1 of 1... (1 Track, LBA: 0 - 40) I 16:30:29 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 40) I 16:30:30 Exporting Graph Data... I 16:30:30 Graph Data File: [it doesn't mather] I 16:30:30 Export Successfully Completed! I 16:30:30 Operation Successfully Completed! - Duration: 00:00:01 I 16:30:30 Average Verify Rate: N/A - Maximum Verify Rate: N/A I 16:30:36 Close Request Acknowledged I 16:30:36 Closing Down... I 16:30:36 Shutting down SPTI... I 16:30:36 ImgBurn closed! Why am I geting this warning and why not on other computer ? Is this warning important ? Do I need to change some settings ? Thanks in advance ! Edited March 24, 2010 by NavCore Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 24, 2010 Share Posted March 24, 2010 You can't write such a small image in SAO mode, the burner rejects it and thus the program automatically falls back to TAO. Link to comment Share on other sites More sharing options...
NavCore Posted March 24, 2010 Author Share Posted March 24, 2010 You can't write such a small image in SAO mode, the burner rejects it and thus the program automatically falls back to TAO. Thanks for quick answer ! Is that a problem ? I just want to know does it affects reading CD or smth ? And, why I didn't get this warning with LG writter ? I'm a novice with this terms: TAO, SAO, DAO . . . etc . . . Thx Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 24, 2010 Share Posted March 24, 2010 No, it shouldn't be a problem. I very much doubt you have cause to be burning such tiny discs that often anyway, do you?! And, why I didn't get this warning with LG writter ? I guess your LG drive didn't complain when I asked it to burn the track in SAO mode Some won't burn tracks less than 2 seconds in length (150 sectors). It's a documented design feature (in the MMC specs for drives) and that's why added the fallback within ImgBurn. Link to comment Share on other sites More sharing options...
NavCore Posted March 24, 2010 Author Share Posted March 24, 2010 (edited) No, it shouldn't be a problem. That's all I want to hear Thanks man ! I very much doubt you have cause to be burning such tiny discs that often anyway, do you?! Yeah Anyway, thanks for helping and have a good time ! ::cheers:: Edited March 24, 2010 by NavCore Link to comment Share on other sites More sharing options...
Recommended Posts