Verification failing, DVD does not work

[Reckoner]

So I been trying to take a shot at burning ISO image files to a dvd+r dl. I've followed the guides posted on the website, and it seems that everything is working fine until the verifcation process starts. This is my log.

 

I 17:02:17 Operation Started!

I 17:02:17 Source File: C:\Users\Roeland\Desktop\gurREN LAGANN\GURREN_LAGGAN_VOL_1.MDS

I 17:02:17 Source File Sectors: 3,860,704 (MODE1/2048)

I 17:02:17 Source File Size: 7,906,721,792 bytes

I 17:02:17 Source File Volume Identifier: GURREN_LAGGAN_VOL_1

I 17:02:17 Source File Volume Set Identifier: 3C7A758A003AE8DA

I 17:02:17 Source File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER!

I 17:02:17 Source File Implementation Identifier: ImgBurn

I 17:02:17 Source File File System(s): ISO9660, UDF (1.02)

I 17:02:17 Destination Device: [2:0:0] TSSTcorp CDDVDW TS-L633L 0500 (E:) (SATA)

I 17:02:17 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 3x, 4x, 6x)

I 17:02:17 Destination Media Sectors: 4,173,824

I 17:02:17 Write Mode: DVD

I 17:02:17 Write Type: DAO

I 17:02:17 Write Speed: 4x

I 17:02:17 Link Size: Auto

I 17:02:17 Lock Volume: Yes

I 17:02:17 Test Mode: No

I 17:02:17 OPC: No

I 17:02:17 BURN-Proof: Enabled

I 17:02:17 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 17:02:17 Book Type Setting: N/A

I 17:02:17 Optimal L0 Data Zone Capacity: 1,936,960

I 17:02:17 Optimal L0 Data Zone Method: Copied From Original Disc

I 17:02:36 Set L0 Data Zone Capacity Succeeded!

I 17:02:36 Filling Buffer... (40 MB)

I 17:02:37 Writing LeadIn...

I 17:02:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 3860703)

I 17:02:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3860703)

I 17:02:57 Writing Layer 0... (LBA: 0 - 1936959)

I 17:16:18 Writing Layer 1... (LBA: 1936960 - 3860703)

I 17:30:35 Synchronising Cache...

I 17:30:49 Closing Track...

I 17:31:14 Finalising Disc...

I 17:32:15 Exporting Graph Data...

I 17:32:15 Graph Data File: C:\Users\Roeland\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633L_0500_FRIDAY-MARCH-26-2010_5-02_PM_MBIPG101-R10-65_4x.ibg

I 17:32:15 Export Successfully Completed!

I 17:32:15 Operation Successfully Completed! - Duration: 00:29:57

I 17:32:15 Average Write Rate: 4,659 KB/s (3.4x) - Maximum Write Rate: 5,577 KB/s (4.0x)

I 17:32:15 Cycling Tray before Verify...

W 17:32:44 Waiting for device to become ready...

I 17:32:51 Device Ready!

E 17:32:51 Verify Failed! - Reason: Layouts do not match.

 

Could the problem be the discs themselves? I'm using Memorex DVD+R DL (Which to my dismay, I discovered had really bad reviews after buying) and as seen in other posts here, verbatim is the recommended disc to buy.

 

Thank you for any help you may be able to provide. I've been scratching my head all day with this process.

Edited March 27, 2010 by Reckoner

[LIGHTNING UK!]

Switch to Read mode and copy + paste the disc info from the panel on the right when you've got that disc in the drive.

[Reckoner]

Switch to Read mode and copy + paste the disc info from the panel on the right when you've got that disc in the drive.

 

Here it is. Which doesn't make much sense to me because it implies that the disc is empty...

 

TSSTcorp CDDVDW TS-L633L 0500 (SATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Next Writable Address: 0

 

Physical Format Information (ADIP - L0):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L1):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

Edited March 27, 2010 by Reckoner

[LIGHTNING UK!]

Yeah and that's the problem here.

 

Your drive does everything it's supposes to and reports all the correct info during the burn, but then we suddenly realise (when Verify starts) that it messed up and still reports the disc as being blank.

 

Take a read:

 

http://forum.imgburn.com/index.php?showtopic=8000

[Reckoner]

Yeah and that's the problem here.

 

Your drive does everything it's supposes to and reports all the correct info during the burn, but then we suddenly realise (when Verify starts) that it messed up and still reports the disc as being blank.

 

Take a read:

 

http://forum.imgburn.com/index.php?showtopic=8000

 

I figured as much. Thanks for the help. Going to attempt to return these to no avail. Well at least I know which discs to buy now.