smeehrrr Posted March 28, 2010 Share Posted March 28, 2010 Does anyone have any tips for improving blu-ray rip speed using imgburn? My blu-ray drives claims to be able to read up to 10x on blu-rays, but my average read rate appears to be less than 3x. Are there settings I can tweak in imgburn to help improve my throughput? Link to comment Share on other sites More sharing options...
Cynthia Posted March 28, 2010 Share Posted March 28, 2010 What brand/model is it? Link to comment Share on other sites More sharing options...
smeehrrr Posted March 28, 2010 Author Share Posted March 28, 2010 What brand/model is it? I've tried with two, the first is the LG combo HD-DVD/BD drive GGC-H20L, and now currently I've got an LG UH10LS20 in there. Similar results with both. If anyone has advice on a better drive for blu-ray ripping, I wouldn't mind hearing that as well. Link to comment Share on other sites More sharing options...
Cynthia Posted March 28, 2010 Share Posted March 28, 2010 DVD based LGs have some type of reading speed lock that you can remove by using MediaCodeSpeedEdit. Not sure if this tool also works with firmware from Blu-ray based burners. Link to comment Share on other sites More sharing options...
smeehrrr Posted March 28, 2010 Author Share Posted March 28, 2010 DVD based LGs have some type of reading speed lock that you can remove by using MediaCodeSpeedEdit. Not sure if this tool also works with firmware from Blu-ray based burners. Ah yes, that appears to have helped. I'll post some measurements shortly. Link to comment Share on other sites More sharing options...
smeehrrr Posted March 28, 2010 Author Share Posted March 28, 2010 Ah yes, that appears to have helped. I'll post some measurements shortly. Reflashing with the riplock removed increased my average speed by 33%. Thanks for the tip! Link to comment Share on other sites More sharing options...
Recommended Posts