@yourservice Posted March 30, 2010 Posted March 30, 2010 All the topics I've been reading about the DirectShow filters r from 2007, 2008? Is there still no solution to this problem? Been using ImgBurn 4 quite a while now & never experienced problems before with burning my .wav & .flac files? Now the .wav burn stops after 20% of the disc & the flac files give me all kinds of errors, the ConnectFilters error but also some mfplat.dll errors. I have Win 7 Ultimate, 64 bits...
LIGHTNING UK! Posted March 30, 2010 Posted March 30, 2010 There is no ongoing problem with this, DirectShow problems are not ImgBurn problems. If you want support, post the log / screenshots etc so we can see what's what - otherwise it's impossible.
@yourservice Posted March 30, 2010 Author Posted March 30, 2010 (edited) Log file: Error message: The 1st song of this cd, from Traders Little Helper: shntool 3.0.4 Copyright © 2000-2007 Jason Jordan <shnutils@freeshell.org> ------------------------------------------------------------------------------- File name: 01 Shaffy Cantate.flac Handled by: flac format module Length: 2:49.00 WAVE format: 0x0001 (Microsoft PCM) Channels: 2 Bits/sample: 16 Samples/sec: 44100 Average bytes/sec: 176400 Rate (calculated): 176400 Block align: 4 Header size: 44 bytes Data size: 29811600 bytes Chunk size: 29811636 bytes Total size (chunk size + 8): 29811644 bytes Actual file size: 14802254 File is compressed: yes Compression ratio: 0.4965 CD-quality properties: CD quality: yes Cut on sector boundary: yes Sector misalignment: 0 bytes Long enough to be burned: yes WAVE properties: Non-canonical header: no Extra RIFF chunks: no Possible problems: File contains ID3v2 tag: no Data chunk block-aligned: yes Inconsistent header: no File probably truncated: unknown Junk appended to file: unknown Odd data size has pad byte: n/a Edited March 30, 2010 by @yourservice
LIGHTNING UK! Posted March 30, 2010 Posted March 30, 2010 Have you installed a DirectShow filter capable of handing Flac files? If you look in the Audio CD guide in the Guides forum, the recommended filters are mentioned at the bottom - in this case it's madFlac. http://forum.doom9.org/showthread.php?t=130498
@yourservice Posted March 30, 2010 Author Posted March 30, 2010 Tried that this afternoon, before posting. Got error msgs (regarding registering .dll or .ocx? in Win 7 64). Now I c it's placed in C:\ Program Files\ImgBurn\MadFlac, tried the install again (not as an administrator...) & it got installed! Will do a test again now!
@yourservice Posted March 30, 2010 Author Posted March 30, 2010 Darn, that's cd number 6 :wacko: Logfile: I 16:24:25 ImgBurn Version 2.5.1.0 started! I 16:24:25 Microsoft Windows 7 Enterprise Edition (6.1, Build 7600) I 16:24:25 Total Physical Memory: 2.087.056 KB - Available: 1.461.440 KB I 16:24:25 Initialising SPTI... I 16:24:25 Searching for SCSI / ATAPI devices... I 16:24:25 -> Drive 1 - Info: _NEC DVD+-RW ND-6500A 203E (E:) (ATA) I 16:24:25 Found 1 DVD±RW! I 16:34:59 Operation Started! I 16:34:59 Source File: D:\Ramses Shaffy - Zijn Grootste Successen Flac\01 Shaffy Cantate.cue I 16:34:59 Source File Sectors: 245.280 (AUDIO/2352) I 16:34:59 Source File Size: 576.898.560 bytes I 16:34:59 Source File File System(s): None I 16:34:59 Destination Device: [0:0:0] _NEC DVD+-RW ND-6500A 203E (E:) (ATA) I 16:34:59 Destination Media Type: CD-R (Disc ID: 97m25s35f, Infodisc Technology Co.) (Speeds: 8x; 16x) I 16:34:59 Destination Media Sectors: 359.847 I 16:34:59 Write Mode: CD I 16:34:59 Write Type: SAO I 16:34:59 Write Speed: MAX I 16:34:59 Lock Volume: Yes I 16:34:59 Test Mode: No I 16:34:59 OPC: No I 16:34:59 BURN-Proof: Enabled I 16:35:00 Write Speed Successfully Set! - Effective: 2.822 KB/s (16x) I 16:35:01 Filling Buffer... (40 MB) I 16:35:03 Writing LeadIn... I 16:35:28 Writing Session 1 of 1... (18 Tracks, LBA: 0 - 245279) I 16:35:29 Writing Track 1 of 18... (AUDIO/2352, FLAC, LBA: 0 - 12674) I 16:35:48 Writing Track 2 of 18... (AUDIO/2352, FLAC, LBA: 12675 - 23037) I 16:36:06 Writing Track 3 of 18... (AUDIO/2352, FLAC, LBA: 23038 - 37112) W 16:36:36 Failed to Write Sectors 31894 - 31920 - Reason: Write Error W 16:36:36 Retrying (1 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (2 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (3 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (4 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (5 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (6 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (7 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (8 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (9 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (10 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (11 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (12 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (13 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (14 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (15 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (16 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (17 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (18 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (19 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:36:36 Retrying (20 of 20)... W 16:36:36 Retry Failed - Reason: Invalid Address For Write W 16:52:03 Retrying (21)... W 16:52:03 Retry Failed - Reason: Invalid Address For Write E 16:52:12 Failed to Write Sectors 31894 - 31920 - Reason: Write Error E 16:52:12 Next Writable Address: 0 I 16:52:12 Synchronising Cache... W 16:52:16 User opted to skip the 'Close Track/Session/Disc' functions. E 16:52:16 Failed to Write Image! I 16:52:17 Exporting Graph Data... I 16:52:17 Graph Data File: C:\Users\Wilfred\AppData\Roaming\ImgBurn\Graph Data Files\_NEC_DVD+-RW_ND-6500A_203E_DINSDAG-30-MAART-2010_16-34_97m25s35f_MAX.ibg I 16:52:17 Export Successfully Completed! E 16:52:17 Operation Failed! - Duration: 00:17:16 I 16:52:17 Average Write Rate: 73 KB/s (0.4x) - Maximum Write Rate: 1.408 KB/s (8.2x) PrtScr:
@yourservice Posted March 30, 2010 Author Posted March 30, 2010 + the .ibg file... _NEC_DVD+-RW_ND-6500A_203E_DINSDAG-30-MAART-2010_16-34_97m25s35f_MAX.ibg
LIGHTNING UK! Posted March 30, 2010 Posted March 30, 2010 Ok, that seems to have fixed the DirectShow error. Now you have an actual burning issue... W 16:36:36 Failed to Write Sectors 31894 - 31920 - Reason: Write Error You could try cleaning the drive with a cleaning disc and maybe attempt an 8x burn. Other than that though, buy some better CD-R's! If your drive keeps erroring out during the burn, obviously it has a problem with them. Personally, I wouldn't bother with anything other than Taiyo Yuden CDs.
@yourservice Posted March 30, 2010 Author Posted March 30, 2010 Ok, that seems to have fixed the DirectShow error. Now you have an actual burning issue... W 16:36:36 Failed to Write Sectors 31894 - 31920 - Reason: Write Error You could try cleaning the drive with a cleaning disc and maybe attempt an 8x burn. Other than that though, buy some better CD-R's! If your drive keeps erroring out during the burn, obviously it has a problem with them. Personally, I wouldn't bother with anything other than Taiyo Yuden CDs. Think that's not the problem Lightning! Just burned a DVD on the same drive, NP... Just burned 2 cd's (same brand (Nashuatec)) with only 1 song on it with Express Burn, no problem... The drive is working 200% alright, the same disc with another program does work alright... The DVD part of ImgBurn does work alright... & It used 2 work fine on this machine, these discs, this drive, never needed MadFlac before on this machine, meaby something wrong with ImgBurn 2.5.x.x???
LIGHTNING UK! Posted March 30, 2010 Posted March 30, 2010 Well it's your drive that's reporting the error, you can either take my word for it or not. Maybe you haven't needed madFlac before because some other codec (which you've since removed) could handle the conversion or you just haven't burnt with ImgBurn/Flac files before on it. Either way, you needed to install a filter for the job and now you've done that you can forget about it. (You should have registered it in the system32 folder though as it's a system wide thing and not just for ImgBurn) DirectShow/Flac/madFlac is not the issue in your most recent log, it's with the drive writing to the disc.
@yourservice Posted March 30, 2010 Author Posted March 30, 2010 Installed in on another Win 7 64 bits machine now, the log while starting: I 18:04:10 ImgBurn Version 2.5.1.0 started! I 18:04:10 Microsoft Windows 7 Enterprise x64 Edition (6.1, Build 7600) I 18:04:10 Total Physical Memory: 8.386.856 KB - Available: 6.145.768 KB W 18:04:10 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 18:04:10 Initialising SPTI... I 18:04:10 Searching for SCSI / ATAPI devices... I 18:04:11 -> Drive 1 - Info: DVD+RW RW5240 1.08 (F:) (ATA) I 18:04:11 -> Drive 2 - Info: KNY U7052RGHIN 1.03 (G:) (SCSI) I 18:04:11 Found 1 DVD+RW and 1 BD-ROM/HD DVD-ROM! What does the warning mean? W 18:04:10 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
LIGHTNING UK! Posted March 30, 2010 Posted March 30, 2010 Are you familiar with Google?! http://lmgtfy.com/?q=SPTD+driver+can+have+a+detrimental+effect+on+drive+performance
kryten Posted March 30, 2010 Posted March 30, 2010 You should have registered it in the system32 folder though as it's a system wide thing and not just for ImgBurn Actually, in 64-bit Windows, I believe files that would normally go into the system32 folder now belong in the SysWOW64 folder. I know I've had to copy and register .dll files there when an installer fails (such as Flac Frontend).
LIGHTNING UK! Posted March 30, 2010 Posted March 30, 2010 ok, whatever. Point is, it shouldn't be in the ImgBurn folder.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now