neil2jo Posted April 2, 2010 Share Posted April 2, 2010 Ok just tried burning a 360game and got the i/o message Running Pioneer BD-ROM BDC-207 with 1.07 firmware, all other drivers up to date Message scsisatus:0x02 Interpretation: check condition CDB: 2a 00 00 04 5e 00 00 00 20 00 interpretation : write(10) - sectors 286208 - 286239 sense area:70 00 00 00 00 00 00 0e 00(x10) interpreation:ni additional sense information I have now lost 5 disc with 5 diif setup but the error is always the same just how much it burns varies My disc are Verbatim x 8 I have burned at 1/2.4 and 8 speed I have set transfer length to auto and manual32 The discs were bought today new and sealed The drive has worked on other titles but this title is quite new Cant seem to butn the following log is 3 attemptes with various speeds I 17:48:07 ImgBurn Version 2.5.1.0 started! I 17:48:07 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 17:48:07 Total Physical Memory: 3,143,440 KB - Available: 1,716,760 KB W 17:48:07 Drive G:\ (FAT32) does not support single files > 4 GB in size. W 17:48:07 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 17:48:07 Drive I:\ (FAT32) does not support single files > 4 GB in size. W 17:48:07 Drive J:\ (FAT32) does not support single files > 4 GB in size. W 17:48:07 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 17:48:07 Initialising SPTI... I 17:48:07 Searching for SCSI / ATAPI devices... I 17:48:07 -> Drive 1 - Info: PIONEER BD-ROM BDC-202 1.07 (D:) (ATA) I 17:48:07 -> Drive 2 - Info: QFMTEL OLIF852BSD6 1.03 (K:) (SCSI) I 17:48:07 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 17:48:49 Operation Started! I 17:48:49 Source File: F:\Downloads\Lips.Party.Classics.XBOX360-DAMNATION\dmn-lips\dmn-lips.dvd I 17:48:49 Source File Sectors: 3,827,488 (MODE1/2048) I 17:48:49 Source File Size: 7,838,695,424 bytes I 17:48:49 Source File Volume Identifier: DVD_ROM I 17:48:49 Source File Volume Set Identifier: ec67c000MS UDFBridge I 17:48:49 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:48:49 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:48:49 Source File File System(s): ISO9660, UDF (1.50) I 17:48:49 Destination Device: [1:0:0] PIONEER BD-ROM BDC-202 1.07 (D:) (ATA) I 17:48:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) I 17:48:49 Destination Media Sectors: 4,173,824 I 17:48:49 Write Mode: DVD I 17:48:49 Write Type: DAO I 17:48:49 Write Speed: 2.4x I 17:48:49 Link Size: Auto I 17:48:49 Lock Volume: Yes I 17:48:49 Test Mode: No I 17:48:50 OPC: No I 17:48:50 BURN-Proof: Enabled I 17:48:50 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 17:48:50 Advanced Settings - Optimal Writing Speed: No I 17:48:50 Optimal L0 Data Zone Capacity: 1,913,760 I 17:48:50 Optimal L0 Data Zone Method: Copied From Original Disc I 17:49:09 Set L0 Data Zone Capacity Succeeded! I 17:49:09 Filling Buffer... (40 MB) I 17:49:10 Writing LeadIn... I 17:49:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 17:49:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 17:49:11 Writing Layer 0... (LBA: 0 - 1913759) W 18:00:02 Failed to Write Sectors 1044448 - 1044479 - Reason: No Additional Sense Information W 18:00:02 Retrying (1 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (2 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (3 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (4 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (5 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (6 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (7 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (8 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (9 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (10 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (11 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (12 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (13 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (14 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (15 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (16 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (17 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (18 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (19 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write W 18:00:02 Retrying (20 of 20)... W 18:00:02 Retry Failed - Reason: Invalid Address For Write E 18:02:05 Failed to Write Sectors 1044448 - 1044479 - Reason: No Additional Sense Information I 18:02:05 Synchronising Cache... W 18:02:08 User opted to skip the 'Close Track/Session/Disc' functions. E 18:02:08 Failed to Write Image! I 18:02:08 Exporting Graph Data... I 18:02:08 Graph Data File: C:\Users\owner\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-ROM_BDC-202_1.07_02-APRIL-2010_17-48_MKM-003-00_2.4x.ibg I 18:02:08 Export Successfully Completed! E 18:02:08 Operation Failed! - Duration: 00:13:18 I 18:02:08 Average Write Rate: 2,702 KB/s (2.0x) - Maximum Write Rate: 3,379 KB/s (2.4x) I 18:04:19 Operation Started! I 18:04:19 Source File: F:\Downloads\Lips.Party.Classics.XBOX360-DAMNATION\dmn-lips\dmn-lips.dvd I 18:04:19 Source File Sectors: 3,827,488 (MODE1/2048) I 18:04:19 Source File Size: 7,838,695,424 bytes I 18:04:19 Source File Volume Identifier: DVD_ROM I 18:04:19 Source File Volume Set Identifier: ec67c000MS UDFBridge I 18:04:19 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:04:19 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:04:19 Source File File System(s): ISO9660, UDF (1.50) I 18:04:19 Destination Device: [1:0:0] PIONEER BD-ROM BDC-202 1.07 (D:) (ATA) I 18:04:19 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) I 18:04:19 Destination Media Sectors: 4,173,824 I 18:04:19 Write Mode: DVD I 18:04:19 Write Type: DAO I 18:04:19 Write Speed: 2.4x I 18:04:19 Link Size: Auto I 18:04:19 Lock Volume: Yes I 18:04:19 Test Mode: No I 18:04:19 OPC: No I 18:04:19 BURN-Proof: Enabled I 18:04:19 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 18:04:19 Advanced Settings - Optimal Writing Speed: No I 18:04:19 Optimal L0 Data Zone Capacity: 1,913,760 I 18:04:19 Optimal L0 Data Zone Method: Copied From Original Disc I 18:04:39 Set L0 Data Zone Capacity Succeeded! I 18:04:39 Filling Buffer... (40 MB) I 18:04:40 Writing LeadIn... I 18:04:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 18:04:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 18:04:41 Writing Layer 0... (LBA: 0 - 1913759) W 18:04:58 Failed to Write Sectors 26912 - 26927 - Reason: No Additional Sense Information W 18:04:58 Retrying (1 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (2 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (3 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (4 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (5 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (6 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (7 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (8 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (9 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (10 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (11 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (12 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (13 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (14 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (15 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (16 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (17 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (18 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (19 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:04:58 Retrying (20 of 20)... W 18:04:58 Retry Failed - Reason: Invalid Address For Write W 18:05:07 Retrying (21)... W 18:05:07 Retry Failed - Reason: Invalid Address For Write E 18:07:31 Failed to Write Sectors 26912 - 26927 - Reason: No Additional Sense Information I 18:07:31 Synchronising Cache... W 18:07:34 User opted to skip the 'Close Track/Session/Disc' functions. E 18:07:34 Failed to Write Image! I 18:07:34 Exporting Graph Data... I 18:07:34 Graph Data File: C:\Users\owner\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-ROM_BDC-202_1.07_02-APRIL-2010_18-04_MKM-003-00_2.4x.ibg I 18:07:34 Export Successfully Completed! E 18:07:34 Operation Failed! - Duration: 00:03:15 I 18:07:34 Average Write Rate: 318 KB/s (0.2x) - Maximum Write Rate: 3,356 KB/s (2.4x) I 18:16:02 Operation Started! I 18:16:02 Source File: F:\Downloads\Lips.Party.Classics.XBOX360-DAMNATION\dmn-lips\dmn-lips.dvd I 18:16:02 Source File Sectors: 3,827,488 (MODE1/2048) I 18:16:02 Source File Size: 7,838,695,424 bytes I 18:16:02 Source File Volume Identifier: DVD_ROM I 18:16:02 Source File Volume Set Identifier: ec67c000MS UDFBridge I 18:16:02 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:16:02 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:16:02 Source File File System(s): ISO9660, UDF (1.50) I 18:16:02 Destination Device: [1:0:0] PIONEER BD-ROM BDC-202 1.07 (D:) (ATA) I 18:16:02 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) I 18:16:02 Destination Media Sectors: 4,173,824 I 18:16:02 Write Mode: DVD I 18:16:02 Write Type: DAO I 18:16:02 Write Speed: 8x I 18:16:02 Link Size: Auto I 18:16:02 Lock Volume: Yes I 18:16:02 Test Mode: No I 18:16:02 OPC: No I 18:16:02 BURN-Proof: Enabled W 18:16:02 Write Speed Miscompare! - Wanted: 11,080 KB/s (8x), Got: 5,540 KB/s (4x) I 18:16:02 Advanced Settings - Optimal Writing Speed: No I 18:16:02 Optimal L0 Data Zone Capacity: 1,913,760 I 18:16:02 Optimal L0 Data Zone Method: Copied From Original Disc I 18:16:22 Set L0 Data Zone Capacity Succeeded! I 18:16:22 Filling Buffer... (40 MB) I 18:16:23 Writing LeadIn... I 18:16:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 18:16:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 18:16:24 Writing Layer 0... (LBA: 0 - 1913759) W 18:18:09 Failed to Write Sectors 286208 - 286239 - Reason: No Additional Sense Information W 18:18:09 Retrying (1 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (2 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (3 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (4 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (5 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (6 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (7 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (8 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (9 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (10 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (11 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (12 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (13 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (14 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (15 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (16 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (17 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (18 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (19 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write W 18:18:09 Retrying (20 of 20)... W 18:18:09 Retry Failed - Reason: Invalid Address For Write E 18:23:47 Failed to Write Sectors 286208 - 286239 - Reason: No Additional Sense Information I 18:23:47 Synchronising Cache... W 18:23:50 User opted to skip the 'Close Track/Session/Disc' functions. E 18:23:50 Failed to Write Image! I 18:23:50 Exporting Graph Data... I 18:23:50 Graph Data File: C:\Users\owner\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-ROM_BDC-202_1.07_02-APRIL-2010_18-16_MKM-003-00_8x.ibg I 18:23:50 Export Successfully Completed! E 18:23:50 Operation Failed! - Duration: 00:07:48 I 18:23:50 Average Write Rate: 1,292 KB/s (0.9x) - Maximum Write Rate: 5,605 KB/s (4.0x) Please help!!! I have read a few peoples probs with various drives etc, but no one seems to be able to find a solution. Ps my drive is less than year old and only has been used no more than 10 times invluding reading and as said has burned previous games Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 2, 2010 Share Posted April 2, 2010 W 18:18:09 Failed to Write Sectors 286208 - 286239 - Reason: No Additional Sense Information That looks like a driver issue to me. The bit in bold is not an error you should be getting... the real one is probably getting lost somewhere. What chipset does your motherboard use? What do you have in your filter drivers list? (look in the tools menu, copy to clipboard and paste for us to look at) Link to comment Share on other sites More sharing options...
neil2jo Posted April 2, 2010 Author Share Posted April 2, 2010 W 18:18:09 Failed to Write Sectors 286208 - 286239 - Reason: No Additional Sense Information That looks like a driver issue to me. The bit in bold is not an error you should be getting... the real one is probably getting lost somewhere. What chipset does your motherboard use? What do you have in your filter drivers list? (look in the tools menu, copy to clipboard and paste for us to look at) filter drivers =============================================== Filter Driver Load Order - ImgBurn v2.5.1.0 =============================================== Upper Device Filter: [None Found] Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: ElbyCDFL Lower Device Filter: [None Found] Filter Name: ElbyCDFL File Name: C:\Windows\System32\Drivers\ElbyCDFL.sys File Version: 5, 2, 1, 3 [5.2.1.3] File Description: ElbyCDIO Filter Driver Product Name: CloneCD Product Version: 5, 2, 1, 3 [5.2.1.3] Company Name: SlySoft, Inc. Copyright: Copyright © 2003 - 2006 SlySoft, Inc. chipset? this is from the mb label on the box (hope you can see from here if not piont me and I shall seek) GA-MA74GM-S2 Amd740g/sb700(chipset i think)/rev.1.0 hop ethis helps Link to comment Share on other sites More sharing options...
neil2jo Posted April 2, 2010 Author Share Posted April 2, 2010 W 18:18:09 Failed to Write Sectors 286208 - 286239 - Reason: No Additional Sense Information That looks like a driver issue to me. The bit in bold is not an error you should be getting... the real one is probably getting lost somewhere. What chipset does your motherboard use? What do you have in your filter drivers list? (look in the tools menu, copy to clipboard and paste for us to look at) using fliter driver load order program which I see you linked in another post ---------------------------------------------------- Filter Driver Load Order http://www.bustrace.com ---------------------------------------------------- Upper Filter Drivers: No Upper Filter Drivers specified for this device. Device Object: PIONEER BD-ROM BDC-202 ATA Device Lower Class Filter: ElbyCDFL Driver Name: elbycdfl.sys File Location: c:\windows\system32\drivers File Description: ElbyCDIO Filter Driver File Version: 5, 2, 1, 3 [5.2.1.3] Product Name: CloneCD Product Version: 5, 2, 1, 3 [5.2.1.3] Company Name: SlySoft, Inc. filter drivers =============================================== Filter Driver Load Order - ImgBurn v2.5.1.0 =============================================== Upper Device Filter: [None Found] Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: ElbyCDFL Lower Device Filter: [None Found] Filter Name: ElbyCDFL File Name: C:\Windows\System32\Drivers\ElbyCDFL.sys File Version: 5, 2, 1, 3 [5.2.1.3] File Description: ElbyCDIO Filter Driver Product Name: CloneCD Product Version: 5, 2, 1, 3 [5.2.1.3] Company Name: SlySoft, Inc. Copyright: Copyright © 2003 - 2006 SlySoft, Inc. chipset? this is from the mb label on the box (hope you can see from here if not piont me and I shall seek) GA-MA74GM-S2 Amd740g/sb700(chipset i think)/rev.1.0 hop ethis helps Link to comment Share on other sites More sharing options...
mmalves Posted April 2, 2010 Share Posted April 2, 2010 Install the chipset driver from this page. By the way, the driver version is the same across all board revisions. Link to comment Share on other sites More sharing options...
neil2jo Posted April 2, 2010 Author Share Posted April 2, 2010 Install the chipset driver from this page. By the way, the driver version is the same across all board revisions. Ok seem to have sorted it but I tried quite a bit before it worked (did not do it in stages) I removed clonecd and img burn Then i see I had another drive, which i don't but turned out to be related to deamon tools so removed that aswell Used driver detective to check all drivers which were up to scratch, but when i clicked on pioneer it seem to have underlining issue's and when I clicked on the help links, was suggesting drive letter assigning might be a problem. SO checked the regedit keys and could see no porblems with drive letters and/or upper/lower filter drivers (or similar) mention associated with the dvd drive (guides said delete these and reboot) I did reassign dvd drive from 'd' to 'b' (but dont think this played a part) the only other thing i done was reinstalled the drivers from gigabyte for ati catalyst I have now burnt 1 of the 2 problem discs (2nd one looks80% complete at mo) so looks good. I think the problem was/is cdclone or demontools lite driver and probably more so the latter in creating a false drive assignment. I can recall years back someone else saying that clonecd and imgburn drivers dont get on well. Thanks for your help anyhow, hopefully this may help someone else. I would strongly recommend removing clonecd and demontools and/or simialr porgram 1st, as I have seen a few post re i/o problem with no results other than changing the actual drive. failing that re-assign the drive letter and obviously all this tied up with up to date drivers..>Happy Easter All Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 2, 2010 Share Posted April 2, 2010 I can recall years back someone else saying that clonecd and imgburn drivers dont get on well. They lied. ImgBurn doesn't have any drivers and CloneCD's are fine. Driver letters are purely cosmetic, the program doesn't use them so that wasn't the cause either. (p.s. don't use b:, it could cause issues for programs that consider a: and b: to be for floppy drives) As I said in my first post, your issue looked driver related (because the real error code was going missing between the drive and my program). You updated the drivers and (hopefully) now you're sorted. Link to comment Share on other sites More sharing options...
Recommended Posts