bobmitmen Posted April 11, 2010 Share Posted April 11, 2010 While backing up a blu ray...I use DVDFab to rip. Then I do the burn with Imgburn 2.5.1.0. Prior to 2.5.1.0, I used 2.5.0.0 and never had issues. Now with the latest version...the burn stops around 15%, when my Pioneer BDR-205 is about to do it's first speed increase from 5.4x to over 6x. My hard drive lights are solid, but the burn light on the burner goes out and it will sit there as long as I let it. Most times, I have to crtl-alt-del and shut the programs down. With 2.5.0.0...I used to get burns all the way through. Is there a setting I am missing???? Seems like nothing is getting to the burner... EVGA E758 with Intel i7 950 Two Western Digital VelociRaptors in RAID 0 Windows 7 Home Premium 64 Bit LG UH10LS20 BR Reader / DVD and CD Burner Pioneer BDR-205 DVDFab 7.0.3.0 Imgburn 2.5.1.0 If you need any other info...please advise... Thanks Bob Link to comment Share on other sites More sharing options...
Cynthia Posted April 11, 2010 Share Posted April 11, 2010 If I remember it right there was no changes in the write function between the two versions. A log would show some more info (like the media you use). Link to comment Share on other sites More sharing options...
bobmitmen Posted April 11, 2010 Author Share Posted April 11, 2010 If I remember it right there was no changes in the write function between the two versions. A log would show some more info (like the media you use). I concur...I purchased a 15 pack of Memorex (Ritek) and that is where the possible issue comes from. I am currently doing a second try and am 60% of the way through the burn and am running at 10X as I should. Looks like a good burn...most likely because it's a good disc vs. the program. Thank you for the reply... Bob Link to comment Share on other sites More sharing options...
Recommended Posts