W 15:40:45 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. problems?

[listerino80]

ive recently been able to burn image files no problem at all, until recently when burning, it had stopped at 50% and in the scroll bar at the bottom it gave me something about SPTD drivers can be detremental or something.

i will post the starting list when imgburn boots up:

 

I 15:40:45 ImgBurn Version 2.5.1.0 started!

I 15:40:45 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:40:45 Total Physical Memory: 523,760 KB - Available: 166,164 KB

W 15:40:45 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:40:45 Initialising SPTI...

I 15:40:45 Searching for SCSI / ATAPI devices...

I 15:40:47 -> Drive 1 - Info: LITE-ON LTR-52327S QS09 (F:) (ATA)

I 15:40:47 -> Drive 2 - Info: PIONEER DVD-RW DVR-109 1.55 (E:) (ATA)

I 15:40:47 Found 1 CD-RW and 1 DVD±RW!

 

and now whenever i start to burn an image, it starts no problem but when it gets to 50% it just stops, but it hasnt frozen as the timer is still counting. its very odd and highly annoying as i dont know what is wrong with it, i have tried updating my pioneer dvd dvr-109 driver and there is no driver update. but i dont know why its having problems now as it was working fine before.

hope someone can clarify the problem for me and how to solve it.

thanks

[mmalves]

The burn log would be more useful (look in ImgBurn's Help menu). As for the SPTD warning you can find out what it is using the Search feature.

 

By the way, there is newer firmware for your burner.

[listerino80]

The burn log would be more useful (look in ImgBurn's Help menu). As for the SPTD warning you can find out what it is using the Search feature.

 

By the way, there is newer firmware for your burner.

 

 

how would i check what firmware my burner is? as for the burn log, it doesnt say anthing about a failure or anything, its very odd, as it just seems to stop at 50%. cant get my head around it. but if ya like i can start another burn and when it stops at it usual place i can copy the log of up to then if you like if ya can help me?

cheers mate

[mmalves]

The burn log would be more useful (look in ImgBurn's Help menu). As for the SPTD warning you can find out what it is using the Search feature.

 

By the way, there is newer firmware for your burner.

 

 

how would i check what firmware my burner is? as for the burn log, it doesnt say anthing about a failure or anything, its very odd, as it just seems to stop at 50%. cant get my head around it. but if ya like i can start another burn and when it stops at it usual place i can copy the log of up to then if you like if ya can help me?

cheers mate

Read again what I posted and you'll notice where to get the log from previous burns and also where to get the latest firmware for your burner.

[listerino80]

The burn log would be more useful (look in ImgBurn's Help menu). As for the SPTD warning you can find out what it is using the Search feature.

 

By the way, there is newer firmware for your burner.

 

 

how would i check what firmware my burner is? as for the burn log, it doesnt say anthing about a failure or anything, its very odd, as it just seems to stop at 50%. cant get my head around it. but if ya like i can start another burn and when it stops at it usual place i can copy the log of up to then if you like if ya can help me?

cheers mate

Read again what I posted and you'll notice where to get the log from previous burns and also where to get the latest firmware for your burner.

 

I 19:18:24 Operation Started!

I 19:18:24 Source File: D:\rapidshare\ccclx-halo3.dvd

I 19:18:24 Source File Sectors: 3,825,924 (MODE1/2048)

I 19:18:24 Source File Size: 7,835,492,352 bytes

I 19:18:24 Source File Volume Identifier: XGD2DVD_NTSC

I 19:18:24 Source File Volume Set Identifier: 34672923

I 19:18:24 Source File Implementation Identifier: Sonic Scenarist 3.1

I 19:18:24 Source File File System(s): ISO9660, UDF (1.02)

I 19:18:24 Destination Device: [1:0:0] PIONEER DVD-RW DVR-109 1.58 (E:) (ATA)

I 19:18:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

I 19:18:24 Destination Media Sectors: 4,173,824

I 19:18:24 Write Mode: DVD

I 19:18:24 Write Type: DAO

I 19:18:24 Write Speed: 2x

I 19:18:24 Link Size: Auto

I 19:18:24 Lock Volume: Yes

I 19:18:24 Test Mode: No

I 19:18:24 OPC: No

I 19:18:24 BURN-Proof: Enabled

W 19:18:24 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

I 19:18:24 Advanced Settings - Optimal Writing Speed: No

I 19:18:24 Optimal L0 Data Zone Capacity: 1,913,760

I 19:18:24 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:18:45 Set L0 Data Zone Capacity Succeeded!

I 19:18:45 Filling Buffer... (20 MB)

I 19:18:46 Writing LeadIn...

I 19:18:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 19:18:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 19:18:47 Writing Layer 0... (LBA: 0 - 1913759)

I 19:38:51 Writing Layer 1... (LBA: 1913760 - 3825923)

I 19:59:18 Abort Request Acknowledged

I 19:59:19 Synchronising Cache...

W 19:59:21 User opted to skip the 'Close Track/Session/Disc' functions.

E 19:59:21 Failed to Write Image!

I 19:59:22 Exporting Graph Data...

I 19:59:22 Graph Data File: C:\Documents and Settings\Stuart\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-109_1.58_MONDAY-APRIL-12-2010_7-18_PM_RICOHJPN-D01-67_2x.ibg

I 19:59:22 Export Successfully Completed!

E 19:59:22 Operation Aborted! - Duration: 00:40:57

I 19:59:22 Average Write Rate: 1,576 KB/s (1.1x) - Maximum Write Rate: 3,411 KB/s (2.5x)

 

thats the log, i started a burn earlier, and again on the last bit of the log, it stopped at 50% again. so not got a bloody clue. this is the log you were on about i assume? if not tell me what info ya need and where i can get it to post here

[listerino80]

The burn log would be more useful (look in ImgBurn's Help menu). As for the SPTD warning you can find out what it is using the Search feature.

 

By the way, there is newer firmware for your burner.

 

 

how would i check what firmware my burner is? as for the burn log, it doesnt say anthing about a failure or anything, its very odd, as it just seems to stop at 50%. cant get my head around it. but if ya like i can start another burn and when it stops at it usual place i can copy the log of up to then if you like if ya can help me?

cheers mate

Read again what I posted and you'll notice where to get the log from previous burns and also where to get the latest firmware for your burner.

 

I 19:18:24 Operation Started!

I 19:18:24 Source File: D:\rapidshare\ccclx-halo3.dvd

I 19:18:24 Source File Sectors: 3,825,924 (MODE1/2048)

I 19:18:24 Source File Size: 7,835,492,352 bytes

I 19:18:24 Source File Volume Identifier: XGD2DVD_NTSC

I 19:18:24 Source File Volume Set Identifier: 34672923

I 19:18:24 Source File Implementation Identifier: Sonic Scenarist 3.1

I 19:18:24 Source File File System(s): ISO9660, UDF (1.02)

I 19:18:24 Destination Device: [1:0:0] PIONEER DVD-RW DVR-109 1.58 (E:) (ATA)

I 19:18:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

I 19:18:24 Destination Media Sectors: 4,173,824

I 19:18:24 Write Mode: DVD

I 19:18:24 Write Type: DAO

I 19:18:24 Write Speed: 2x

I 19:18:24 Link Size: Auto

I 19:18:24 Lock Volume: Yes

I 19:18:24 Test Mode: No

I 19:18:24 OPC: No

I 19:18:24 BURN-Proof: Enabled

W 19:18:24 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

I 19:18:24 Advanced Settings - Optimal Writing Speed: No

I 19:18:24 Optimal L0 Data Zone Capacity: 1,913,760

I 19:18:24 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:18:45 Set L0 Data Zone Capacity Succeeded!

I 19:18:45 Filling Buffer... (20 MB)

I 19:18:46 Writing LeadIn...

I 19:18:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 19:18:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 19:18:47 Writing Layer 0... (LBA: 0 - 1913759)

I 19:38:51 Writing Layer 1... (LBA: 1913760 - 3825923)

I 19:59:18 Abort Request Acknowledged

I 19:59:19 Synchronising Cache...

W 19:59:21 User opted to skip the 'Close Track/Session/Disc' functions.

E 19:59:21 Failed to Write Image!

I 19:59:22 Exporting Graph Data...

I 19:59:22 Graph Data File: C:\Documents and Settings\Stuart\Application Data\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-109_1.58_MONDAY-APRIL-12-2010_7-18_PM_RICOHJPN-D01-67_2x.ibg

I 19:59:22 Export Successfully Completed!

E 19:59:22 Operation Aborted! - Duration: 00:40:57

I 19:59:22 Average Write Rate: 1,576 KB/s (1.1x) - Maximum Write Rate: 3,411 KB/s (2.5x)

 

thats the log, i started a burn earlier, and again on the last bit of the log, it stopped at 50% again. so not got a bloody clue. this is the log you were on about i assume? if not tell me what info ya need and where i can get it to post here

 

**I 19:38:51 Writing Layer 1... (LBA: 1913760 - 3825923)**

its when it get to that part of the log it stops at 50%

[mmalves]

I 19:18:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

Try with Verbatim 2.4x blanks to see if they work better. If it doesn't work with them then we'll know the problem is the burner.

[listerino80]

I 19:18:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

Try with Verbatim 2.4x blanks to see if they work better. If it doesn't work with them then we'll know the problem is the burner.

 

im using Aone dvd+r dl, and ive never had any problems with them before, i use them for games and all sorts really. i just cant understand why its stopping now. ive just wiped my pc and started again, so im going to try again, and i will let you know, thats if i can get into my second hard drive (slave), as for some reason now, my pc tells me its there but wont let me get into it, so now im trying to figure out how to get into my 2nd hdd as it keeps saying inaccesable. any ideas on how to get into it?