DreamOn Posted April 17, 2010 Posted April 17, 2010 (edited) Hey all im new here and also new to imgburn... i keep getting the following error while trying to verify a ISO.. i have tried to burn it on both DVD-/+R and i always get the same error: Unrecovered Read Error Log File: I 00:18:47 ImgBurn Version 2.5.1.0 started! I 00:18:47 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 00:18:47 Total Physical Memory: 3,111,344 KB - Available: 2,301,044 KB I 00:18:47 Initialising SPTI... I 00:18:47 Searching for SCSI / ATAPI devices... I 00:18:47 -> Drive 1 - Info: HL-DT-ST DVD+-RW GT10N A107 (D:) (SATA) I 00:18:47 Found 1 DVD±RW/RAM! I 00:19:52 Operation Started! I 00:19:52 Source File: C:\Users\Ste\Downloads\[WII]Red_Steel_2[PAL][ESPALWII.com]\redsteel2(compress).iso I 00:19:52 Source File Sectors: 2,294,912 (MODE1/2048) I 00:19:52 Source File Size: 4,699,979,776 bytes I 00:19:52 Source File Volume Identifier: Red Steel 2 I 00:19:52 Source File File System(s): Special I 00:19:53 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GT10N A107 (D:) (SATA) I 00:19:53 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 8x) I 00:19:53 Destination Media Sectors: 2,295,104 I 00:19:53 Write Mode: DVD I 00:19:53 Write Type: DAO I 00:19:53 Write Speed: 2x I 00:19:53 DVD+R Reserve Track: No I 00:19:53 Link Size: Auto I 00:19:53 Lock Volume: Yes I 00:19:53 Test Mode: No I 00:19:53 OPC: No I 00:19:53 BURN-Proof: Enabled W 00:19:53 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 11,080 KB/s (8x) W 00:19:53 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 11,080 KB/s (8x) W 00:19:53 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 11,080 KB/s (8x) W 00:19:53 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 11,080 KB/s (8x) W 00:19:53 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) / 11,080 KB/s (8x) I 00:19:53 Book Type Setting: N/A I 00:19:53 Filling Buffer... (40 MB) I 00:19:54 Writing LeadIn... I 00:20:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 00:20:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) I 00:43:44 Synchronising Cache... I 00:44:07 Closing Track... I 00:44:08 Finalising Disc... I 00:44:14 Exporting Graph Data... I 00:44:15 Graph Data File: C:\Users\Ste\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GT10N_A107_18-APRIL-2010_00-19_MCC-004-00_2x.ibg I 00:44:15 Export Successfully Completed! I 00:44:15 Operation Successfully Completed! - Duration: 00:24:21 I 00:44:15 Average Write Rate: 3,236 KB/s (2.3x) - Maximum Write Rate: 3,380 KB/s (2.4x) I 00:44:15 Cycling Tray before Verify... W 00:44:32 Waiting for device to become ready... I 00:44:37 Device Ready! I 00:44:41 Operation Started! I 00:44:41 Source Device: [1:0:0] HL-DT-ST DVD+-RW GT10N A107 (D:) (SATA) I 00:44:41 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 8x) I 00:44:41 Image File: C:\Users\Ste\Downloads\[WII]Red_Steel_2[PAL][ESPALWII.com]\redsteel2(compress).iso I 00:44:41 Image File Sectors: 2,294,912 (MODE1/2048) I 00:44:41 Image File Size: 4,699,979,776 bytes I 00:44:41 Image File Volume Identifier: Red Steel 2 I 00:44:41 Image File File System(s): Special I 00:44:41 Read Speed (Data/Audio): MAX / MAX I 00:44:41 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 00:44:41 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) W 00:45:13 Failed to Read Sector 33264 - Reason: Unrecovered Read Error W 00:45:37 Retrying (1)... W 00:45:43 Retry Failed - Reason: Unrecovered Read Error W 00:50:15 Retrying (2)... W 00:50:21 Retry Failed - Reason: Unrecovered Read Error W 00:53:46 Failed to Read Sector 33264 - Reason: Unrecovered Read Error W 00:53:56 Failed to Read Sector 33265 - Reason: Unrecovered Read Error W 00:54:13 Failed to Read Sector 33265 - Reason: Unrecovered Read Error W 00:54:20 Failed to Read Sector 33266 - Reason: Unrecovered Read Error E 00:54:22 Failed to Read Sector 33266 - Reason: Unrecovered Read Error E 00:54:23 Failed to Verify Sectors! I 00:54:23 Exporting Graph Data... I 00:54:23 Graph Data File: C:\Users\Ste\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GT10N_A107_18-APRIL-2010_00-19_MCC-004-00_2x.ibg I 00:54:23 Export Successfully Completed! E 00:54:23 Operation Failed! - Duration: 00:09:41 I 00:54:23 Average Verify Rate: 114 KB/s (0.1x) - Maximum Verify Rate: 4,829 KB/s (3.5x) Does this mean the disc was burned fine but the media cannot be read? will it still work 100%? I have tried to burn this about 6 times - 3 DVD-R and 3 DVD+R All help will be greatful! -DreamOn Edited April 17, 2010 by DreamOn
mmalves Posted April 18, 2010 Posted April 18, 2010 You could try verifying those discs using another drive/computer to know if they're good burns or not. Anyway... I 00:19:53 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GT10N A107 (D:) (SATA)I 00:19:53 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 8x) I 00:19:53 Write Speed: 2x Update your burner's firmware and try burning again using the faster write speeds, as that's 16x rated media after all. By the way, what's the brand of those blanks?
DreamOn Posted April 18, 2010 Author Posted April 18, 2010 (edited) Thanks for the fast reply! im using Verbatim, if i burn at a faster speed will the wii read the disc? i have been told it will only read up to x3? ill update my firmware tomorrow when i get chance! Edited April 18, 2010 by DreamOn
mmalves Posted April 18, 2010 Posted April 18, 2010 The console only cares about burn quality/readability of the disc, and burning 16x media at 2x doesn't usually result in a good quality burn.
DreamOn Posted April 18, 2010 Author Posted April 18, 2010 so i have updated my firmware, but still get the same error... LogFile: I 10:56:47 ImgBurn Version 2.5.1.0 started! I 10:56:47 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 10:56:47 Total Physical Memory: 3,111,344 KB - Available: 2,104,488 KB I 10:56:47 Initialising SPTI... I 10:56:47 Searching for SCSI / ATAPI devices... I 10:56:47 -> Drive 1 - Info: HL-DT-ST DVD+-RW GT10N A109 (D:) (SATA) I 10:56:47 Found 1 DVD±RW/RAM! I 10:57:13 Operation Started! I 10:57:13 Source File: C:\Users\Ste\Downloads\[WII]Red_Steel_2[PAL][ESPALWII.com]\redsteel2(compress).iso I 10:57:13 Source File Sectors: 2,294,912 (MODE1/2048) I 10:57:13 Source File Size: 4,699,979,776 bytes I 10:57:13 Source File Volume Identifier: Red Steel 2 I 10:57:13 Source File File System(s): Special I 10:57:13 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GT10N A109 (D:) (SATA) I 10:57:13 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 8x) I 10:57:13 Destination Media Sectors: 2,298,496 I 10:57:13 Write Mode: DVD I 10:57:13 Write Type: DAO I 10:57:13 Write Speed: 16x I 10:57:13 Link Size: Auto I 10:57:13 Lock Volume: Yes I 10:57:13 Test Mode: No I 10:57:13 OPC: No I 10:57:13 BURN-Proof: Enabled W 10:57:13 Write Speed Miscompare! - Wanted: 22,160 KB/s (16x), Got: 11,080 KB/s (8x) I 10:57:13 Filling Buffer... (40 MB) I 10:57:14 Writing LeadIn... I 10:57:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 10:57:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) I 11:07:40 Synchronising Cache... I 11:08:09 Exporting Graph Data... I 11:08:09 Graph Data File: C:\Users\Ste\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GT10N_A109_18-APRIL-2010_10-57_MCC_03RG20_16x.ibg I 11:08:09 Export Successfully Completed! I 11:08:09 Operation Successfully Completed! - Duration: 00:10:55 I 11:08:09 Average Write Rate: 7,779 KB/s (5.6x) - Maximum Write Rate: 11,327 KB/s (8.2x) I 11:08:09 Cycling Tray before Verify... W 11:08:22 Waiting for device to become ready... I 11:08:32 Device Ready! I 11:08:36 Operation Started! I 11:08:36 Source Device: [1:0:0] HL-DT-ST DVD+-RW GT10N A109 (D:) (SATA) I 11:08:36 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 8x) I 11:08:36 Image File: C:\Users\Ste\Downloads\[WII]Red_Steel_2[PAL][ESPALWII.com]\redsteel2(compress).iso I 11:08:36 Image File Sectors: 2,294,912 (MODE1/2048) I 11:08:36 Image File Size: 4,699,979,776 bytes I 11:08:36 Image File Volume Identifier: Red Steel 2 I 11:08:36 Image File File System(s): Special I 11:08:36 Read Speed (Data/Audio): MAX / MAX I 11:08:36 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 11:08:36 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) W 11:17:03 Failed to Read Sector 1787536 - Reason: Unrecovered Read Error W 11:17:20 Retrying (1)... W 11:17:26 Retry Failed - Reason: Unrecovered Read Error W 11:17:33 Retrying (2)... W 11:17:39 Retry Failed - Reason: Unrecovered Read Error W 11:17:45 Failed to Read Sector 1787536 - Reason: Unrecovered Read Error W 11:17:52 Failed to Read Sector 1787537 - Reason: Unrecovered Read Error W 11:17:54 Failed to Read Sector 1787537 - Reason: Unrecovered Read Error W 11:18:01 Failed to Read Sector 1787538 - Reason: Unrecovered Read Error W 11:18:05 Failed to Read Sector 1787538 - Reason: Unrecovered Read Error W 11:18:12 Failed to Read Sector 1787539 - Reason: Unrecovered Read Error W 11:18:16 Failed to Read Sector 1787539 - Reason: Unrecovered Read Error W 11:18:24 Failed to Read Sector 1787540 - Reason: Unrecovered Read Error E 11:18:26 Failed to Read Sector 1787540 - Reason: Unrecovered Read Error E 11:18:26 Failed to Verify Sectors! I 11:18:27 Exporting Graph Data... I 11:18:27 Graph Data File: C:\Users\Ste\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GT10N_A109_18-APRIL-2010_10-57_MCC_03RG20_16x.ibg I 11:18:27 Export Successfully Completed! E 11:18:27 Operation Failed! - Duration: 00:09:50 I 11:18:27 Average Verify Rate: 6,059 KB/s (4.4x) - Maximum Verify Rate: 10,231 KB/s (7.4x) Anything else i could do to make it work?
Cynthia Posted April 18, 2010 Posted April 18, 2010 I would also try 4x. If you still get errors, try with a cleaning disc and if that also fails, replace the drive.
Recommended Posts