payte Posted April 19, 2010 Share Posted April 19, 2010 So I don't know if it's a problem with my burner or imgburn but disks I've been trying to burn give me a "Medium Not Present" error after about a 40% burn.Oh I don't think it's the media since I've burned successfully using the media and the burner. The disks are Memorex dual layers. Here's the log, I don't know what other info to add. I 18:27:54 ImgBurn Version 2.5.1.0 started! I 18:27:54 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 18:27:54 Total Physical Memory: 2,087,364 KB - Available: 889,436 KB W 18:27:54 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 18:27:54 Initialising SPTI... I 18:27:54 Searching for SCSI / ATAPI devices... I 18:27:54 -> Drive 1 - Info: HL-DT-ST DVD+-RW GSA-T11N A103 (E:) (ATA) I 18:27:54 Found 1 DVD±RW! I 18:28:48 Operation Started! I 18:28:48 Source File: C:\Users\Patrick\Desktop\Super Street Fighter IV.dvd I 18:28:48 Source File Sectors: 3,827,488 (MODE1/2048) I 18:28:48 Source File Size: 7,838,695,424 bytes I 18:28:48 Source File Volume Identifier: DVD_ROM I 18:28:48 Source File Volume Set Identifier: ec67c000MS UDFBridge I 18:28:48 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:28:48 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:28:48 Source File File System(s): ISO9660, UDF (1.50) I 18:28:48 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GSA-T11N A103 (E:) (ATA) I 18:28:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x) I 18:28:48 Destination Media Sectors: 4,173,824 I 18:28:48 Write Mode: DVD I 18:28:48 Write Type: DAO I 18:28:48 Write Speed: 1x I 18:28:48 Link Size: Auto I 18:28:48 Lock Volume: Yes I 18:28:48 Test Mode: No I 18:28:48 OPC: No I 18:28:48 BURN-Proof: Enabled W 18:28:48 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 3,324 KB/s (2.4x) I 18:28:48 Book Type Setting: N/A I 18:28:48 Optimal L0 Data Zone Capacity: 1,913,760 I 18:28:48 Optimal L0 Data Zone Method: Copied From Original Disc I 18:29:49 Set L0 Data Zone Capacity Succeeded! I 18:29:50 Filling Buffer... (40 MB) I 18:29:51 Writing LeadIn... I 18:30:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 18:30:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 18:30:17 Writing Layer 0... (LBA: 0 - 1913759) W 18:46:47 Failed to Write Sectors 1583040 - 1583071 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) W 18:46:47 Retrying (1 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (2 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (3 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (4 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (5 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (6 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (7 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (8 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (9 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (10 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (11 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (12 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (13 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (14 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (15 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (16 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (17 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (18 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (19 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present W 18:46:47 Retrying (20 of 20)... W 18:46:47 Retry Failed - Reason: Medium Not Present E 18:46:50 Failed to Write Sectors 1583040 - 1583071 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) I 18:46:50 Synchronising Cache... W 18:46:50 Synchronise Cache Failed! - Reason: Medium Not Present W 18:46:50 Retrying (1 of 3)... W 18:46:50 Retry Failed - Reason: Medium Not Present W 18:46:50 Retrying (2 of 3)... W 18:46:50 Retry Failed - Reason: Medium Not Present W 18:46:50 Retrying (3 of 3)... W 18:46:50 Retry Failed - Reason: Medium Not Present E 18:46:54 Synchronise Cache Failed! - Reason: Medium Not Present W 18:46:56 User opted to skip the 'Close Track/Session/Disc' functions. E 18:46:56 Failed to Write Image! I 18:46:56 Exporting Graph Data... I 18:46:56 Graph Data File: C:\Users\Patrick\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GSA-T11N_A103_SUNDAY-APRIL-18-2010_6-28_PM_RICOHJPN-D01-67_1x.ibg I 18:46:56 Export Successfully Completed! E 18:46:56 Operation Failed! - Duration: 00:18:08 I 18:46:56 Average Write Rate: 3,188 KB/s (2.3x) - Maximum Write Rate: 3,383 KB/s (2.4x) Link to comment Share on other sites More sharing options...
mmalves Posted April 19, 2010 Share Posted April 19, 2010 I 18:28:48 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GSA-T11N A103 (E:) (ATA)I 18:28:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x) I 18:28:48 Write Speed: 1x Update your burner's firmware and try again. If 2.4x doesn't work then try 4x, and if it doesn't work then you'll need to try with Verbatim DVD+R DL blanks or with another burner. Link to comment Share on other sites More sharing options...
payte Posted April 22, 2010 Author Share Posted April 22, 2010 I 18:28:48 Destination Device: [1:0:0] HL-DT-ST DVD+-RW GSA-T11N A103 (E:) (ATA)I 18:28:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x) I 18:28:48 Write Speed: 1x Update your burner's firmware and try again. If 2.4x doesn't work then try 4x, and if it doesn't work then you'll need to try with Verbatim DVD+R DL blanks or with another burner. The blanks worked in my friend's burner so I'm guessing it's not the medium and I downloaded a different image just to make sure and the burner stopped burning again at 46% so I think it's my burner but I'm not sure. Anyway I could find out? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 22, 2010 Share Posted April 22, 2010 It's always an issue between the discs, the drive and the firmware. They're the three things that make or break a burn. Sure, changing the drive might fix it... or the new drive may continue to have an issue with them. Likewise, changing to Verbs might allow your current drive to burn ok - so where do you put the blame then? btw, the first error is the real one. I 18:30:17 Writing Layer 0... (LBA: 0 - 1913759)W 18:46:47 Failed to Write Sectors 1583040 - 1583071 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) Link to comment Share on other sites More sharing options...
payte Posted April 22, 2010 Author Share Posted April 22, 2010 It's always an issue between the discs, the drive and the firmware. They're the three things that make or break a burn. Sure, changing the drive might fix it... or the new drive may continue to have an issue with them. Likewise, changing to Verbs might allow your current drive to burn ok - so where do you put the blame then? btw, the first error is the real one. I 18:30:17 Writing Layer 0... (LBA: 0 - 1913759)W 18:46:47 Failed to Write Sectors 1583040 - 1583071 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) Oh ok, when I get my hands on a Verbatim disk I'll try to burn it and see how that goes. What does that error mean? and does it matter that I'm trying to burn DL disks as opposed to single layer? Link to comment Share on other sites More sharing options...
mmalves Posted April 23, 2010 Share Posted April 23, 2010 Only the burner's manufacturer can tell you what exactly that error means, and yes, from a technical point of view, burning dual-layer media is a lot more difficult and that's why it's important to use high quality media. Link to comment Share on other sites More sharing options...
Recommended Posts