PlatinumESV Posted April 20, 2010 Posted April 20, 2010 I have 3+ Burners to work from and i'm Not sure if any of them are Capable of changing the booktype to DVD-ROM So that I can copy my GM NavDisk for the Escalade. Heres what I have in my first computer running windows 7 64 bit: ** INFO : Drive = LITE-ON DVDRW SOHW-832S - [FW VPDE] - [ATAPI] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-RW ** INFO : Disc = [DVD+R-DL:RITEK-S04-066] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #4 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #4 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] AND ** INFO : Drive = ATAPI DVD A DH16A1L - [FW KH15] - [ATA] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW DVD-RAM ** INFO : Disc = [DVD+R:OPTODISC-OR4-000] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 3324 kBps ( 2.40x) - [CLV/Non-Pure CAV] we also have a HP DVDRAM GT 20L ATA in my brothers laptop and a TSST corp DVD+-RW TS-H653B SCSI i have tried changing the booktype in imgburn on both of the dvd identified drives and all come up with errors. Please help me Write this darn Disk so my dad can have GPS back in the caddy. Thanks, Jake
LIGHTNING UK! Posted April 20, 2010 Posted April 20, 2010 In theory, the two liteon drives should support it, maybe even the Samsung one. It would all be automatic anyway so there's no need for you to go messing with anything. Just burn the disc and check the booktype value as the verify operation starts or via the disc info box on the right of the main screen (look for the 'Physical Format Information (Last Recorded)' bit).
PlatinumESV Posted April 20, 2010 Author Posted April 20, 2010 In theory, the two liteon drives should support it, maybe even the Samsung one. It would all be automatic anyway so there's no need for you to go messing with anything. Just burn the disc and check the booktype value as the verify operation starts or via the disc info box on the right of the main screen (look for the 'Physical Format Information (Last Recorded)' bit). Thank you for the quick reply. Here is what i get when i put the dl in the lite on drive. LITE-ON DVDRW SOHW-832S VPDE (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 3,324 KB/s (2.4x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 3,324 KB/s (2.4x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 3,324 KB/s (2.4x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 3,324 KB/s (2.4x) - WS: 11,080 KB/s (8x) and heres when i put it in the ATAPI one ATAPI DVD A DH16A1L KH15 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 5,540 KB/s (4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 8,310 KB/s (6x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 11,080 KB/s (8x) Both Booktype are Book Type: DVD+R DL That means they havent changed right?
mmalves Posted April 20, 2010 Posted April 20, 2010 Use the LITE-ON tab of the Change Book Type dialog and you'll see if it does support booktyping DVD+R DL media or not. By the way, the booktype on the disc is only changed when you burn it, hence why Physical Format Information (Last Recorded).
PlatinumESV Posted April 20, 2010 Author Posted April 20, 2010 (edited) Use the LITE-ON tab of the Change Book Type dialog and you'll see if it does support booktyping DVD+R DL media or not. By the way, the booktype on the disc is only changed when you burn it, hence why Physical Format Information (Last Recorded). Yea it doesnt let me change it in the Lite-On tab it says invalid field in CDB sorry for the edit I have found this information when i recorded a dummy Physical Format Information (Last Recorded): Disc ID: MBIPG101-R04-01 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 looks like im the dummy for not knowing? haha anyways im guessing it does it automatically? Edited April 20, 2010 by PlatinumESV
mmalves Posted April 20, 2010 Posted April 20, 2010 Yup, most burners automatically booktype DVD+R DL media to DVD-ROM.
PlatinumESV Posted April 20, 2010 Author Posted April 20, 2010 (edited) Thanks for the help, Right now im Burning the Disc at 1x. ill let you know how it goes. Works Wonderfully. Second read said unable to read disc because its scratched or something but i think its just the reader. Edited April 20, 2010 by PlatinumESV
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now