lIsHy09 Posted April 22, 2010 Share Posted April 22, 2010 Okay I have never had any problems with Imgburn until I updated to windows 7. When I use imgburn I use the build mode. In the build mode (if you look at the image attached) you can clearly see it does not say my D drive. I clicked the folder and clicked on the dvd drive and it then it automatically changes to this folder: C:\Users\Alicia\AppData\Local\Microsoft\Windows\Burn\Burn\7.ISO. I don't know what do really. In the log it shows my dvd player is recognized (which is plextor) I also updated my firmware for the plextor. Any help that can be given would be really great. Thanks! Log: I 15:39:52 ImgBurn Version 2.5.1.0 started! I 15:39:53 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:39:53 Total Physical Memory: 1,047,864 KB - Available: 316,112 KB I 15:39:53 Initialising SPTI... I 15:39:53 Searching for SCSI / ATAPI devices... I 15:39:57 -> Drive 1 - Info: PLEXTOR DVDR PX-880SA 1.12 (D:) (ATA) I 15:39:57 Found 1 DVD±RW/RAM! Link to comment Share on other sites More sharing options...
mmalves Posted April 22, 2010 Share Posted April 22, 2010 Switch Output to Device. Link to comment Share on other sites More sharing options...
Recommended Posts