Jump to content

Attempting a burn, then, nothing.


VIPERSCARNAGE
 Share

Recommended Posts

Hi guys. I downloaded imgburn last week and successfully burned a DL DVD, been trying all day today and it is no longer working. Exact same file types as i burned last week but when i click the button to burn nothing is happening. I waited for almost an hour today at longest with not even 1% written to disc. Furthermore, when i try to close the program or end it in processes, it disappears from screen but remains in my processes in task manager. Here is a log from my last run. Please help.

 

I 19:23:29 -> Drive 3 - Info: _NEC DVD_RW ND-3540A 1.04 (RAID)

I 19:23:29 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM!

W 19:23:38 Device Arrival Detected!

I 19:23:38 Searching for SCSI / ATAPI devices...

I 19:23:38 -> Drive 1 - Info: PIONEER DVD-RW DVR-109 1.40 (F:) (RAID)

I 19:23:38 -> Drive 2 - Info: SNKV 23OH230L6B 1.03 (H:) (SCSI)

I 19:23:38 -> Drive 3 - Info: _NEC DVD_RW ND-3540A 1.04 (G:) (RAID)

I 19:23:38 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM!

I 19:23:54 Operation Started!

I 19:23:54 Source File: D:\Marvel_Ultimate_Alliance_2_XBOX360\sp-ua2.dvd

I 19:23:54 Source File Sectors: 3,827,488 (MODE1/2048)

I 19:23:54 Source File Size: 7,838,695,424 bytes

I 19:23:54 Source File Volume Identifier: DVD_ROM

I 19:23:54 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 19:23:54 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:23:54 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:23:54 Source File File System(s): ISO9660, UDF (1.50)

I 19:23:54 Destination Device: [4:1:0] _NEC DVD_RW ND-3540A 1.04 (G:) (RAID)

I 19:23:54 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 19:23:54 Destination Media Sectors: 4,173,824

I 19:23:54 Write Mode: DVD

I 19:23:54 Write Type: DAO

I 19:23:54 Write Speed: 2.4x

I 19:23:54 Link Size: Auto

I 19:23:54 Lock Volume: Yes

I 19:23:54 Test Mode: No

I 19:23:54 OPC: No

I 19:23:54 BURN-Proof: Enabled

I 19:23:54 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 19:23:54 Book Type Setting: DVD-ROM

I 19:23:54 Optimal L0 Data Zone Capacity: 1,913,760

I 19:23:54 Optimal L0 Data Zone Method: Copied From Original Disc

 

 

Any ideas would be greatly appreciated as im at a loss, nothing has changed from the last time i burned so not sure what the problem is.

Link to comment
Share on other sites

Your IDE controller working in RAID mode could be blocking/messing the communication with the burner, so set it to normal mode if you can. You should also look for the latest drivers for your system's chipset/storage controllers (this website might help). You could try with your Pioneer burner too after updating its firmware.

 

What Jim44 said above also applies :)

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.