Deganveran Posted May 2, 2010 Posted May 2, 2010 (edited) I have an LH-20A1H burner. Recently it has been acting weird by not taking a few seconds for the tray to pop out but it was still burning fine. Recently though, when I go to imgburn it said "Device Not Ready (No Reference Position Found)". It greyed out the burn icon even though it was reading what model of burner I had. So I updated the firmware from LL0C to LL0DN but now the tray won't come out when I press the button or when I click on eject in imgburn. Is this a bug or is it the burner? I had read that the device not ready thing can be a computer issue so I wanna fix it before I get a new burner. There is no log as it is not letting me burn anymore. Edited May 2, 2010 by Deganveran
LIGHTNING UK! Posted May 2, 2010 Posted May 2, 2010 The whole thing sounds like a drive issue. Of course it depends on the discs you're using. Can it initialise an original/pressed DVD-ROM disc ok? If it can, try cleaning the drive with a cleaning disc.
Deganveran Posted May 2, 2010 Author Posted May 2, 2010 The whole thing sounds like a drive issue. Of course it depends on the discs you're using. Can it initialise an original/pressed DVD-ROM disc ok? If it can, try cleaning the drive with a cleaning disc. I use only verbs, both dvd and dl and I rarely use any cd's. It was working on DVD Rom discs before I tried to update it now the tray won't come out at all to check it.
LIGHTNING UK! Posted May 2, 2010 Posted May 2, 2010 So it won't even eject if you do it having turned the entire machine off and on again (before windows starts to load) ? You could try flashing the firmware again, maybe it didn't take properly the first time.
Recommended Posts