garfunk Posted May 23, 2006 Posted May 23, 2006 (edited) Although I'm not new to imgburn, just very recently have I had any troubles burning my images with it. The only thing I can think of that I made changes is that I upgraded Imgburn from 1.1 I believe and installed Isobuster. Don't know if Isobuster messes my drive or not. I also never had any problem burning with this media before with Imgburn. Any help will be greatly appreciated! I attached an image of the error too. My log: I 16:33:26 ImgBurn Version 1.3.0.0 started! I 16:33:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 16:33:26 Initialising SPTI... I 16:33:26 Searching for SCSI / ATAPI devices... I 16:33:26 Found 1 CD-RW and 1 DVD?RW! I 16:33:54 Operation Started! I 16:33:54 Source File: D:\Videos\0\P1.iso I 16:33:54 Source File Sectors: 2,279,484 (MODE1/2048) I 16:33:54 Source File Size: 4,668,383,232 bytes I 16:33:54 Source File Volume Identifier: P1 I 16:33:54 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR ? 1993 E.YOUNGDALE ? 1997 J.PEARSON/J.SCHILLING I 16:33:55 Source File Implementation Identifier: mkisofs I 16:33:55 Operation Started! I 16:33:55 Source File: D:\Videos\0\P1.iso I 16:33:55 Source File UDF Revision: 1.02 I 16:33:55 Source File Sectors: 2,279,484 (MODE1/2048) I 16:33:55 Destination Device: [1:1:0] PIONEER DVD-RW DVR-107D 1.22 (F:) (ATA) I 16:33:55 Source File Size: 4,668,383,232 bytes I 16:33:55 Source File Volume Identifier: P1 I 16:33:55 Destination Media Type: DVD+R (Disc ID: RITEK-R03-02) (Speeds: 2.4x, 4x, 6x, 8x) I 16:33:55 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR ? 1993 E.YOUNGDALE ? 1997 J.PEARSON/J.SCHILLING I 16:33:55 Destination Media Sectors: 2,295,104 I 16:33:55 Source File Implementation Identifier: mkisofs I 16:33:55 Write Mode: DVD I 16:33:55 Source File UDF Revision: 1.02 I 16:33:55 Write Type: DAO I 16:33:55 Destination Device: [1:1:0] PIONEER DVD-RW DVR-107D 1.22 (F:) (ATA) I 16:33:55 Write Speed: 4x I 16:33:55 Destination Media Type: DVD+R (Disc ID: RITEK-R03-02) (Speeds: 2.4x, 4x, 6x, 8x) I 16:33:55 Link Size: Auto I 16:33:55 Destination Media Sectors: 2,295,104 I 16:33:55 Test Mode: No I 16:33:55 Write Mode: DVD I 16:33:55 BURN-Proof: Enabled I 16:33:55 Write Type: DAO I 16:33:55 Write Speed: 4x I 16:33:55 Link Size: Auto I 16:33:55 Test Mode: No I 16:33:55 BURN-Proof: Enabled I 16:33:55 Filling Buffer... I 16:33:55 Filling Buffer... I 16:33:59 Writing LeadIn... I 16:33:59 Writing LeadIn... W 16:33:59 Failed to Write Sectors 0 - 31 - Invalid Address For Write W 16:33:59 Retrying (1 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (2 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (3 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (4 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (5 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (6 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (7 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (8 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (9 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (10 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (11 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (12 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (13 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (14 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (15 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (16 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (17 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (18 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (19 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write W 16:33:59 Retrying (20 of 20)... W 16:33:59 Retry Failed - Invalid Address For Write E 16:34:10 Failed to Write Sectors 0 - 31 - Invalid Address For Write I 16:34:10 Synchronising Cache... I 16:34:12 Closing Track... W 16:34:50 Failed to Write Sectors 768 - 799 - Invalid Address For Write W 16:34:50 Retrying (1 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (2 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (3 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (4 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (5 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (6 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (7 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (8 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (9 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (10 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (11 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (12 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (13 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (14 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (15 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (16 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (17 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (18 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (19 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write W 16:34:50 Retrying (20 of 20)... W 16:34:50 Retry Failed - Invalid Address For Write I 16:34:51 Finalising Disc... E 16:35:07 Failed to Write Sectors 768 - 799 - Invalid Address For Write I 16:35:07 Synchronising Cache... E 16:35:14 Synchronise Cache Failed! - Reason: Logical Unit not ready, Operation in progress I 16:35:14 Closing Track... E 16:35:16 Close Track Failed! - Reason: Logical Unit not ready, Operation in progress I 16:35:16 Finalising Disc... E 16:35:16 Finalise Disc Failed! - Reason: Logical Unit not ready, Operation in progress E 16:35:16 Failed to Write Image! E 16:35:16 Operation Failed! - Duration: 00:01:21 I 16:35:16 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Edited May 23, 2006 by garfunk
cornholio7 Posted May 23, 2006 Posted May 23, 2006 have you checked your dma? take a look in the faq on this site and delete your controller and reboot and see if it helps
LIGHTNING UK! Posted May 23, 2006 Posted May 23, 2006 Are you sure you didn't just change to a new spindle of discs or anything? From the tests done for the 'Drives & Media' forum, I found the RITEK-R03-02 ones to be pretty bad. You'd do well to stop using them and go with higher quality media.
garfunk Posted May 23, 2006 Author Posted May 23, 2006 I'm sorry I'm not hardware savvy, what is dma? I just recently bought this spindle from Office Depot, Maxell DVD+R 8x. However, I did successfully burn a few DVDs from it with Imgburn. I didn't know Ritek R03 2s are bad. The only reason I switched to another brand was because of my poor experience with Verbatim MCC004, which ultimately created unreadable DVDs within a month. But I don't understand why I suddenly have this problem given I could still burn just a couple days ago with the same spindle.
cornholio7 Posted May 23, 2006 Posted May 23, 2006 http://forum.imgburn.com/index.php?s=&show...=findpost&p=967 look at the link for dma like LUK says just changing spindles can give the kind of results you are experiencing
garfunk Posted May 23, 2006 Author Posted May 23, 2006 Okay, I read the bit about DMA, but I don't think that's the problem. It might be the media. Sigh. Recently I'm having bitter experiences with unreadable media, such as the Verbatim described above. But I'm still confused about why it won't burn now when it could with the same exact media.
garfunk Posted May 23, 2006 Author Posted May 23, 2006 I just tried burning the image with Nero, and it's not working either... it says "Power Calibration Error" and it "Generating DVD high compatibility borders" (sic). I'm still confused because just a couple days ago my brother burnt stuff from Nero onto these same exact discs on the same spindle.
cornholio7 Posted May 23, 2006 Posted May 23, 2006 try deleting the IDE controller anyway and reboot and at least we will know for sure its not that. i had a problem with a pc recently that was giving similar problems and restoring dma solved that problem
garfunk Posted May 23, 2006 Author Posted May 23, 2006 I tried again but to no avail. I'll try the DMA as soon as I can to see what's going on... this is worrying me. I 18:28:56 ImgBurn Version 1.3.0.0 started! I 18:28:56 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 18:28:56 Initialising SPTI... I 18:28:56 Searching for SCSI / ATAPI devices... I 18:28:57 Found 1 CD-RW and 1 DVD?RW! I 18:30:29 Operation Started! I 18:30:29 Source File: D:\Videos\0\P1.iso I 18:30:29 Source File Sectors: 2,279,484 (MODE1/2048) I 18:30:29 Source File Size: 4,668,383,232 bytes I 18:30:29 Source File Volume Identifier: P1 I 18:30:29 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 18:30:29 Source File Implementation Identifier: mkisofs I 18:30:29 Source File UDF Revision: 1.02 I 18:30:29 Destination Device: [1:1:0] PIONEER DVD-RW DVR-107D 1.22 (F:) (ATA) I 18:30:29 Destination Media Type: DVD+R (Disc ID: RITEK-R03-02) (Speeds: 2.4x, 4x, 6x, 8x) I 18:30:29 Destination Media Sectors: 2,295,104 I 18:30:29 Write Mode: DVD I 18:30:29 Write Type: DAO I 18:30:29 Write Speed: 4x I 18:30:29 Link Size: Auto I 18:30:29 Test Mode: No I 18:30:29 BURN-Proof: Enabled I 18:30:29 Filling Buffer... I 18:30:31 Writing LeadIn... W 18:30:45 Failed to Write Sectors 768 - 799 - Power Calibration Area Error W 18:30:45 Retrying (1 of 20)... I 18:31:58 Abort Request Acknowledged
polopony Posted May 24, 2006 Posted May 24, 2006 I'm suprised to hear that you're having problems with Verbatim discs I use quite a bit of the 004's without any problems with an NEC3500. Verbs are at the top of the list in media Physical Format Information (ADIP): Disc ID: MCC-004-00 Book Type: DVD+R Part Version: 1 its possible that the drive is going south on you ,you should at the least get a kit to clean the laser and see if it helps ,re flash the firmware ,firmware is where all the media "brands" are recognized ,do the DMA thing and see if it helps .You could also switch your drive to your brothers machine and see if its OS related keep in touch and we'll get it figured out
garfunk Posted May 24, 2006 Author Posted May 24, 2006 (edited) Thanks for everyones' help. So far I did use a lens cleaner, that didn't really make a difference. As for DMA, my computer says that the drive is already in DMA mode. I don't know if my drive is primary or secondary, but here's a screenshot of the primary. I'm concerned for my drive now. I have no clue how it got messed up (or whatnot). I also returned my remaining Maxell DVD spindles... too bad I wasted $15 on one. Already halfway through it. I also have a question under the Important section of enabling DMA. I run WinXP, so do I uninstall this? Second screenshot. I'm afraid if losing my drives if I do so. Edited May 24, 2006 by garfunk
garfunk Posted May 24, 2006 Author Posted May 24, 2006 (edited) Well, I found an old Nero log of mine and I believe my DMA is indeed enabled: Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.09 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PIONEER DVD-RW DVR-107D>Version: 1.09 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JB-00EVA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW099D CD-R/RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === CyberDrv CW099D CD-R/RW E: CDRom0 PIONEER DVD-RW DVR-107D F: CDRom1 ======================= I'm beginning to think my drive suddenly did a 180 and hates me. Any ideas? Edited May 24, 2006 by garfunk
Jill Posted May 24, 2006 Posted May 24, 2006 An old nero log doesn't help if things have changed recently. Delete the controller and reboot, you will not lose your drives.
garfunk Posted May 24, 2006 Author Posted May 24, 2006 Do I just uninstall like my second attachment?
pfeerick Posted May 24, 2006 Posted May 24, 2006 (edited) Do I just uninstall like my second attachment? Yes, your second attachment is rignt Garfunk. You right-click on the DMA controller and uninstall it. Make sure you delete the DMA controller that your burner is connected to (I don't think deleting the main controller entry will do much). You then need to restart your computer. Windows will redetect your DMA controller and also the drives on it (think of it as a spring clean for Windows ). Hope that fixes your problem. rgds, peter Edited May 24, 2006 by pfeerick
garfunk Posted May 24, 2006 Author Posted May 24, 2006 (edited) How do I know what drive my DMA controller is connected to? Will this wipe my harddrives? This is the first time I'm doing this. I asked my friend who does IT stuff at his job and he says he personally won't dabble in this stuff and that my computer might not reboot. I'm quite apprehensive, sorry. But if this can potentially fix my burner, I might try it, I just need to make sure this won't do any harm to my computer. Edited May 24, 2006 by garfunk
lfcrule1972 Posted May 24, 2006 Posted May 24, 2006 Delete the controller exactly as per your screenshots above, if you check the FAQ which was linked above you will see that Lightning UK! confirms this is the correct way to do it !
garfunk Posted May 24, 2006 Author Posted May 24, 2006 Alright, I just went through the uninstalling process and it still doesn't work. Log here: I 02:21:56 ImgBurn Version 1.3.0.0 started! I 02:21:56 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 02:21:56 Initialising SPTI... I 02:21:56 Searching for SCSI / ATAPI devices... I 02:21:56 Found 1 CD-RW and 1 DVD?RW! I 02:22:00 Operation Started! I 02:22:00 Source File: D:\Videos\0\P1.iso I 02:22:00 Source File Sectors: 2,279,484 (MODE1/2048) I 02:22:00 Source File Size: 4,668,383,232 bytes I 02:22:00 Source File Volume Identifier: P1 I 02:22:00 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 02:22:00 Source File Implementation Identifier: mkisofs I 02:22:00 Source File UDF Revision: 1.02 I 02:22:00 Destination Device: [1:1:0] PIONEER DVD-RW DVR-107D 1.22 (F:) (ATA) I 02:22:00 Destination Media Type: DVD+R (Disc ID: RITEK-R03-02) (Speeds: 2.4x, 4x, 6x, 8x) I 02:22:00 Destination Media Sectors: 2,295,104 I 02:22:00 Write Mode: DVD I 02:22:00 Write Type: DAO I 02:22:00 Write Speed: 4x I 02:22:00 Link Size: Auto I 02:22:00 Test Mode: No I 02:22:00 BURN-Proof: Enabled I 02:22:00 Filling Buffer... I 02:22:02 Writing LeadIn... W 02:22:16 Failed to Write Sectors 768 - 799 - Power Calibration Area Error W 02:22:16 Retrying (1 of 20)... I 02:22:20 Abort Request Acknowledged
garfunk Posted May 24, 2006 Author Posted May 24, 2006 (edited) Tired of wasting DVD+Rs, I returned to my old batch of DVD+RWs that I long neglected some time ago. Surprisingly, I get a success. Immediately afterwards I tried again the Ritek R03 and still the same error. What's the meaning of this? I 02:57:31 ImgBurn Version 1.3.0.0 started! I 02:57:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 02:57:31 Initialising SPTI... I 02:57:31 Searching for SCSI / ATAPI devices... I 02:57:31 Found 1 CD-RW and 1 DVD?RW! I 02:59:34 Operation Started! I 02:59:34 Source File: D:\Videos\0\P1.iso I 02:59:34 Source File Sectors: 2,279,484 (MODE1/2048) I 02:59:34 Source File Size: 4,668,383,232 bytes I 02:59:34 Source File Volume Identifier: P1 I 02:59:34 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR ? 1993 E.YOUNGDALE ? 1997 J.PEARSON/J.SCHILLING I 02:59:34 Source File Implementation Identifier: mkisofs I 02:59:34 Source File UDF Revision: 1.02 I 02:59:34 Destination Device: [1:1:0] PIONEER DVD-RW DVR-107D 1.22 (F:) (ATA) I 02:59:34 Destination Media Type: DVD+RW (Disc ID: INFODISC-A01-02) (Speeds: 2.4x) I 02:59:35 Destination Media Sectors: 2,295,104 I 02:59:35 Write Mode: DVD I 02:59:35 Write Type: DAO I 02:59:35 Write Speed: 4x I 02:59:35 Link Size: Auto I 02:59:35 Test Mode: No I 02:59:35 BURN-Proof: Enabled I 02:59:35 Filling Buffer... I 02:59:36 Writing LeadIn... I 02:59:49 Writing Image... I 03:23:13 Synchronising Cache... I 03:23:21 Closing Session... I 03:23:22 Operation Successfully Completed! - Duration: 00:23:47 I 03:23:22 Average Write Rate: 3,249 KB/s (2.3x) - Maximum Write Rate: 3,347 KB/s (2.4x) Edited May 24, 2006 by garfunk
LIGHTNING UK! Posted May 24, 2006 Posted May 24, 2006 The meaning is that your drive doesn't support those discs. But I'm sure that's fairly obvious by now!
garfunk Posted May 24, 2006 Author Posted May 24, 2006 Yeah... despite it being obvious, why was I able to burn at least 10 discs from the same spindle? That's kind of odd.
LIGHTNING UK! Posted May 24, 2006 Posted May 24, 2006 Who knows. Luck? Maybe those 10 were from a slightly different batch. They do get mixed up on spindles too sometimes. You can read loads of stuff on Power Calibration Errors using Google if you're so inclined.
Shamus_McFartfinger Posted May 24, 2006 Posted May 24, 2006 Yeah... despite it being obvious, why was I able to burn at least 10 discs from the same spindle? That's kind of odd. Burning is the easy part....... usually. Even crap media like CMC burn occasionally. Regardless of how many of these things you've already burned, INFODISK media is garbage. I suspect that most (if not all) would have failed to verify after the burn. A "power calibration" error is a dead giveaway for either a fooked drive or shit media. Deleting or uninstalling the IDE controllers won't make a rat's arse of difference when the media is rubbish. The end. When you go shopping next time get some "Taiyo Yuden" media. Your problems will dissapear.
garfunk Posted May 24, 2006 Author Posted May 24, 2006 I've heard TY discs are good. How do I know what I'm buying are TY discs? I'm very sad at going through this. I even thought about buying a new drive but I guess that's not the problem.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now