gandalf72 Posted May 6, 2010 Share Posted May 6, 2010 (edited) Hi, I am not sure if this can be done or not, I would like to use imgburn to burn dual layers, and download nzb's with newsbin pro. Everytime I do though the buffers go over the threshold and I have to stop playing music and or newsbin. Is there a setting I can change to allow me to do this? Disc is verb I started newsbin part way through the burn and stopped it within 10 seconds when buffers went down. Thanks in advance. I 08:41:05 ImgBurn Version 2.5.1.0 started! I 08:41:05 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 08:41:05 Total Physical Memory: 4,192,440 KB - Available: 2,833,928 KB I 08:41:05 Initialising SPTI... I 08:41:05 Searching for SCSI / ATAPI devices... I 08:41:05 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S223B SB00 (E:) (ATA) I 08:41:05 Found 1 DVD±RW/RAM! I 08:43:04 Operation Started! I 08:43:04 Source File: C:\file.dvd I 08:43:04 Source File Sectors: 3,827,488 (MODE1/2048) I 08:43:04 Source File Size: 7,838,695,424 bytes I 08:43:04 Source File Volume Identifier: DVD_ROM I 08:43:04 Source File Volume Set Identifier: 356fc000MS UDFBridge I 08:43:04 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 08:43:04 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 08:43:04 Source File File System(s): ISO9660, UDF (1.50) I 08:43:04 Destination Device: [0:1:0] TSSTcorp CDDVDW SH-S223B SB00 (E:) (ATA) I 08:43:04 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 08:43:04 Destination Media Sectors: 4,173,824 I 08:43:04 Write Mode: DVD I 08:43:04 Write Type: DAO I 08:43:04 Write Speed: 2.4x I 08:43:04 Link Size: Auto I 08:43:04 Lock Volume: Yes I 08:43:04 Test Mode: No I 08:43:04 OPC: No I 08:43:04 BURN-Proof: Enabled W 08:43:04 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 08:43:04 Book Type Setting: DVD-ROM I 08:43:04 User Specified L0 Data Zone Capacity: 1,913,760 I 08:43:45 Set L0 Data Zone Capacity Succeeded! I 08:43:46 Filling Buffer... (40 MB) I 08:43:52 Writing LeadIn... I 08:43:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 08:43:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 08:43:54 Writing Layer 0... (LBA: 0 - 1913759) W 08:46:22 Waiting for buffers to recover... (LBA: 388320) W 08:46:25 Waiting for hard disk activity to reach threshold level...] I 08:46:26 Writing Sectors... I 08:55:56 Writing Layer 1... (LBA: 1913760 - 3827487) W 09:02:31 Waiting for buffers to recover... (LBA: 2861120) W 09:02:37 Waiting for hard disk activity to reach threshold level... I 09:02:39 Writing Sectors... I 09:08:43 Synchronising Cache... I 09:08:47 Closing Track... I 09:08:50 Finalising Disc... I 09:09:24 Exporting Graph Data... I 09:09:24 Graph Data File: C:\Users\name\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223B_SB00_06-MAY-2010_08-43_MKM-003-00_2.4x.ibg I 09:09:24 Export Successfully Completed! I 09:09:24 Operation Successfully Completed! - Duration: 00:26:20 I 09:09:24 Average Write Rate: 5,144 KB/s (3.7x) - Maximum Write Rate: 5,887 KB/s (4.3x) Edited May 6, 2010 by gandalf72 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 6, 2010 Share Posted May 6, 2010 Try enabling the buffered I/O option on the I/O tab in the settings. As you've got loads of memory, try doubling the size of the buffer too. Oh and one last thing... update the firmware on your drive. http://www.firmwarehq.com/Samsung/SH-S223B/files.html You want SB02. Link to comment Share on other sites More sharing options...
gandalf72 Posted May 6, 2010 Author Share Posted May 6, 2010 (edited) Try enabling the buffered I/O option on the I/O tab in the settings. As you've got loads of memory, try doubling the size of the buffer too. Oh and one last thing... update the firmware on your drive. http://www.firmwarehq.com/Samsung/SH-S223B/files.html You want SB02. Thanks for help, I upgraded firmware, Thank you very much for the link!! I changed the IO buffer to 512mb and attempted to use newsbin again. I just done another re run their, and only got one buffer threshold. When it got to 51% it lost the first buffer and was heavily reliant on the device buffer from that point onwards with 0% available on the first buffer. I seemed to have forgotten to have saved my options first time around as it burned that last one at full speed instead of the 2.4 I had previously slected. Just wanted to say thank you very much for your help it is very much appreciated. Edited May 6, 2010 by gandalf72 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 6, 2010 Share Posted May 6, 2010 You don't really need it as big as that, 128mb would be more than enough. Did you make the change for buffered reads too? Try defragging your drive if you haven't already done so. Link to comment Share on other sites More sharing options...
gandalf72 Posted May 21, 2010 Author Share Posted May 21, 2010 You don't really need it as big as that, 128mb would be more than enough. Did you make the change for buffered reads too? Try defragging your drive if you haven't already done so. Sorry for delay in answering your question had to rebuild pc. I dont think I have made the change to buffered reads - can you tell me where I do that please. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 21, 2010 Share Posted May 21, 2010 Read post 2. Link to comment Share on other sites More sharing options...
gandalf72 Posted June 3, 2010 Author Share Posted June 3, 2010 Read post 2. I can confirm that I had ticked the box enabling the buffer recovery if this is what you were recommending. In the section below that the recovery section what should they be set to? Thanks in advance. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 3, 2010 Share Posted June 3, 2010 The default values are fine. So if in doubt, just click the 'Defaults' button and apply them for that tab. Link to comment Share on other sites More sharing options...
Recommended Posts