Jump to content

Disc Not Empty


FULL-TON

Recommended Posts

Been burning for years, keep getting Disc Not Empty when trying to write image to disc. Using Verbatim DVD-R blank discs which have used forever, it keeps getting this, tried using dozens of blank ones and get the same thing. Please help me. Also tried to use a dual-layer from FugiFilm DVD+R DL to burn something else which i have done in the past, same thing. IMG Log reads the following:

 

I 14:58:07 ImgBurn Version 2.5.1.0 started!

I 14:58:07 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 14:58:07 Total Physical Memory: 2,095,020 KB - Available: 1,026,752 KB

I 14:58:07 Initialising SPTI...

I 14:58:07 Searching for SCSI / ATAPI devices...

I 14:58:07 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-841S 1.00 (E:) (ATA)

I 14:58:07 Found 1 DVD±RW/RAM!

Link to comment
Share on other sites

There is a later version of the firmware

 

http://www.firmwarehq.com/Matshita/UJ-841S/files.html

 

Could be that something is messing up your driver

 

Can you switch to read mode and post the info in the right panel regarding disc info?

 

 

This is what is says in read mode:

 

MATSHITA DVD-RAM UJ-841S 1.00 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Incomplete

State of Last Session: Damaged

Erasable: No

Free Sectors: 2,297,888

Free Space: 4,706,074,624 bytes

Free Time: 510:40:38 (MM:SS:FF)

Next Writable Address: 0

 

Pre-recorded Information:

Manufacturer ID: MCC 03RG20

 

Physical Format Information (Last Recorded):

Disc ID: 0@P-!-00

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 196,608

Last Physical Sector in Layer 0: 0

 

 

Also is that firmware good for my computer because it says for Sony Vaio, but i have a Fugitsu?

Edited by FULL-TON
Link to comment
Share on other sites

Is the disc info from a not used disc?

 

If it's new it looks as your burner is on it's way out.

 

Skip that firmware. You probably need firmware for a Fujitsu drive.

 

 

yes, brand new disc

Link to comment
Share on other sites

Please post the media information from when you're in Write mode.

 

 

This is what the media info is in Write mode:

 

MATSHITA DVD-RAM UJ-841S 1.00 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Incomplete

State of Last Session: Damaged

Erasable: No

Sessions: 1

Free Sectors: 2,297,888

Free Space: 4,706,074,624 bytes

Free Time: 510:40:38 (MM:SS:FF)

Next Writable Address: 0

Supported Write Speeds: 2x, 4x, 6x, 8x

 

Pre-recorded Information:

Manufacturer ID: MCC 03RG20

 

Physical Format Information (Last Recorded):

Disc ID: 0@P-!-00

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 196,608

Last Physical Sector in Layer 0: 0

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x01, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2297888 (0x00231020)

-> RS: 2,770 KB/s (2x) - WS: 2,770 KB/s (2x)

Descriptor 2...

-> B0: 0x01, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2297888 (0x00231020)

-> RS: 5,540 KB/s (4x) - WS: 5,540 KB/s (4x)

Descriptor 3...

-> B0: 0x01, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2297888 (0x00231020)

-> RS: 8,310 KB/s (6x) - WS: 8,310 KB/s (6x)

Descriptor 4...

-> B0: 0x01, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2297888 (0x00231020)

-> RS: 11,080 KB/s (8x) - WS: 11,080 KB/s (8x)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.