Vizual Prophet Posted May 23, 2010 Posted May 23, 2010 Every time I try to burn a dual layer disk it freezes or I get an error message at 50% - I've tried formatting my hard drive, buying a new dual layer drive, different disks, nothing seems to work! Can someone please help. Most of the time when the writing process gets to 50% it just stops. According to ImgBurn its still writing but it just stays at 50% and says the time remaining is unknown. Sometimes though I get an error message at the exact same percentage. I I've posted an image of the error I get. I used to be able to burn disks with no problems, when this first started happening I binned my old writer & bought a new one, but I'm now guessing that wasn't even the problem!
mmalves Posted May 23, 2010 Posted May 23, 2010 The program's log has more useful information that we need, so please post it.
Vizual Prophet Posted May 23, 2010 Author Posted May 23, 2010 The program's log has more useful information that we need, so please post it. Unfortunately I forgot to save the log on that occasion, and every other time I do it, it gets to 50% and then just does nothing. for example at the moment I have one attempting to copy but it's been sitting at 50% doing nothing for the past 15mins. I'll post a pic & the log from that below. I 12:50:36 ImgBurn Version 2.5.1.0 started! I 12:50:37 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 12:50:37 Total Physical Memory: 3,144,012 KB - Available: 2,283,592 KB W 12:50:37 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 12:50:37 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 12:50:37 Initialising SPTI... I 12:50:37 Searching for SCSI / ATAPI devices... I 12:50:37 -> Drive 1 - Info: Optiarc DVD RW AD-7243S 1.03 (E:) (ATA) I 12:50:37 Found 1 DVD±RW/RAM! I 12:50:43 Operation Started! I 12:50:43 Source File: C:\Users\VizualProphet\Documents\sp-popfs.dvd I 12:50:43 Source File Sectors: 3,827,488 (MODE1/2048) I 12:50:43 Source File Size: 7,838,695,424 bytes I 12:50:43 Source File Volume Identifier: DVD_ROM I 12:50:43 Source File Volume Set Identifier: ec67c000MS UDFBridge I 12:50:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:50:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:50:43 Source File File System(s): ISO9660, UDF (1.50) I 12:50:43 Destination Device: [3:0:0] Optiarc DVD RW AD-7243S 1.03 (E:) (ATA) I 12:50:43 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 12:50:43 Destination Media Sectors: 4,173,824 I 12:50:43 Write Mode: DVD I 12:50:43 Write Type: DAO I 12:50:43 Write Speed: 2.4x I 12:50:43 Link Size: Auto I 12:50:43 Lock Volume: Yes I 12:50:43 Test Mode: No I 12:50:43 OPC: No I 12:50:43 BURN-Proof: Enabled W 12:50:43 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 12:50:43 Book Type Setting: DVD-ROM I 12:50:44 User Specified L0 Data Zone Capacity: 1,913,760 I 12:50:49 Set L0 Data Zone Capacity Succeeded! I 12:50:49 Filling Buffer... (40 MB) I 12:50:49 Writing LeadIn... I 12:50:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:50:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 12:50:53 Writing Layer 0... (LBA: 0 - 1913759) I 13:02:49 Writing Layer 1... (LBA: 1913760 - 3827487)
mmalves Posted May 23, 2010 Posted May 23, 2010 Look for the latest drivers for your system's chipset/storage controllers (this website might help). Next time try burning at 6x or 8x. You should also read this -> http://forum.imgburn.com/index.php?showtopic=8000
Vizual Prophet Posted May 23, 2010 Author Posted May 23, 2010 Look for the latest drivers for your system's chipset/storage controllers (this website might help). Next time try burning at 6x or 8x. You should also read this -> http://forum.imgburn.com/index.php?showtopic=8000 I checkout out that website, got a few updates, tried burning it at 6x and this time it didn't freeze at 50% but I got the same error at 50% - i managed to copy the log this time though, does this add any insight?? (P.S. I'm using verbatim disks) I 13:56:13 ImgBurn Version 2.5.1.0 started! I 13:56:13 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 13:56:13 Total Physical Memory: 3,144,012 KB - Available: 2,427,312 KB W 13:56:13 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 13:56:13 Initialising SPTI... I 13:56:13 Searching for SCSI / ATAPI devices... I 13:56:13 -> Drive 1 - Info: Optiarc DVD RW AD-7243S 1.03 (E:) (ATA) I 13:56:13 Found 1 DVD±RW/RAM! I 13:56:50 Operation Started! I 13:56:50 Source File: C:\Users\VizualProphet\Documents\sp-popfs.dvd I 13:56:50 Source File Sectors: 3,827,488 (MODE1/2048) I 13:56:50 Source File Size: 7,838,695,424 bytes I 13:56:50 Source File Volume Identifier: DVD_ROM I 13:56:50 Source File Volume Set Identifier: ec67c000MS UDFBridge I 13:56:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:56:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:56:50 Source File File System(s): ISO9660, UDF (1.50) I 13:56:50 Destination Device: [3:0:0] Optiarc DVD RW AD-7243S 1.03 (E:) (ATA) I 13:56:50 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 13:56:50 Destination Media Sectors: 4,173,824 I 13:56:50 Write Mode: DVD I 13:56:50 Write Type: DAO I 13:56:50 Write Speed: 6x I 13:56:50 Link Size: Auto I 13:56:50 Lock Volume: Yes I 13:56:50 Test Mode: No I 13:56:50 OPC: No I 13:56:50 BURN-Proof: Enabled I 13:56:50 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 13:56:50 Book Type Setting: DVD-ROM I 13:56:50 User Specified L0 Data Zone Capacity: 1,913,760 I 13:56:56 Set L0 Data Zone Capacity Succeeded! I 13:56:56 Filling Buffer... (40 MB) I 13:56:56 Writing LeadIn... I 13:57:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:57:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:57:00 Writing Layer 0... (LBA: 0 - 1913759) I 14:06:03 Writing Layer 1... (LBA: 1913760 - 3827487) W 14:06:11 Failed to Write Sectors 1914304 - 1914335 - Reason: Power Calibration Area Error W 14:06:11 Retrying (1 of 20)... W 14:06:11 Retry Failed - Reason: Write Error W 14:06:11 Retrying (2 of 20)... W 14:06:11 Retry Failed - Reason: Write Error W 14:06:11 Retrying (3 of 20)... W 14:06:11 Retry Failed - Reason: Write Error W 14:06:11 Retrying (4 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (5 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (6 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (7 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (8 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (9 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (10 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (11 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (12 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (13 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (14 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (15 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (16 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (17 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (18 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (19 of 20)... W 14:06:12 Retry Failed - Reason: Write Error W 14:06:12 Retrying (20 of 20)... W 14:06:12 Retry Failed - Reason: Write Error E 14:06:25 Failed to Write Sectors 1914304 - 1914335 - Reason: Power Calibration Area Error I 14:06:25 Synchronising Cache... W 14:06:29 User opted to skip the 'Close Track/Session/Disc' functions. E 14:06:29 Failed to Write Image! I 14:06:29 Exporting Graph Data... I 14:06:29 Graph Data File: C:\Users\VizualProphet\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7243S_1.03_23-MAY-2010_13-56_RICOHJPN-D01-67_6x.ibg I 14:06:29 Export Successfully Completed! E 14:06:29 Operation Failed! - Duration: 00:09:39 I 14:06:29 Average Write Rate: 6,776 KB/s (4.9x) - Maximum Write Rate: 8,798 KB/s (6.4x)
mmalves Posted May 23, 2010 Posted May 23, 2010 I've never seen Verbatim DVD+R DL media that doesn't use MKM dye. That power calibration error means your burner doesn't like those discs, so you'll have to try other brands until you find something that works.
Vizual Prophet Posted May 23, 2010 Author Posted May 23, 2010 Sorry your right it was an Infiniti 360 disk I used that time. I've got them in the same spindal. I will try other media then, I tried burning with Ashampoo Burning Studio there & the program crashed at 50% as well. Thanks for taking the time to try & help.
Recommended Posts