Beef Wellington Posted June 1, 2010 Posted June 1, 2010 Following the guide here I've tried to slipsteam and create a bootable disc multiple times. However, when I try to boot from said disc I get error "CDBOOT: Couldn't find NTLDR" every single time. I've gone trough the whole guide and followed everything to the letter. Does anyone know what I could be doing wrong?
Beef Wellington Posted June 1, 2010 Author Posted June 1, 2010 Post the log Here is a recent one with me trying to modify a Bart CD. I tried to extract the boot image, modify the files on the CD, then burn with the original boot image. Same issue. I 11:42:56 Operation Started! I 11:42:56 Building Image Tree... I 11:42:57 Checking Directory Depth... I 11:42:57 Calculating Totals... I 11:42:57 Preparing Image... W 11:42:57 ISO9660 File System: 156 folder/file names have been modified due to your current settings. I 11:42:57 Checking Path Length... I 11:42:57 Contents: 1,280 Files, 30 Folders I 11:42:57 Content Type: Data I 11:42:57 Data Type: MODE1/2048 I 11:42:57 File System(s): ISO9660 (Bootable) I 11:42:57 Volume Label: BART I 11:42:57 Size: 177,013,853 bytes I 11:42:57 Sectors: 87,017 I 11:42:57 Image Size: 178,388,992 bytes I 11:42:57 Image Sectors: 87,104 I 11:42:59 Operation Successfully Completed! - Duration: 00:00:02 I 11:42:59 Operation Started! I 11:42:59 Source File: -==/\/[bUILD IMAGE]\/\==- I 11:42:59 Source File Sectors: 87,104 (MODE1/2048) I 11:42:59 Source File Size: 178,388,992 bytes I 11:42:59 Source File Volume Identifier: BART I 11:42:59 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 11:42:59 Source File Implementation Identifier: ImgBurn v2.5.0.0 I 11:42:59 Source File File System(s): ISO9660 (Bootable) I 11:42:59 Destination Device: [1:1:0] HL-DT-ST DVD+-RW GSA-H21L 2.02 (X:) (ATA) I 11:42:59 Destination Media Type: CD-RW (Disc ID: 97m34s23f, Mitsubishi Chemical Corp.) (Speeds: 10x) I 11:42:59 Destination Media Sectors: 336,073 I 11:42:59 Write Mode: CD I 11:42:59 Write Type: SAO I 11:42:59 Write Speed: 1x I 11:42:59 Lock Volume: Yes I 11:42:59 Test Mode: No I 11:42:59 OPC: No I 11:42:59 BURN-Proof: Enabled W 11:42:59 Write Speed Miscompare! - Wanted: 176 KB/s (1x), Got: 706 KB/s (4x) I 11:42:59 Filling Buffer... (20 MB) I 11:43:01 Writing LeadIn... I 11:43:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 87103) I 11:43:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 87103) I 11:48:34 Synchronising Cache... I 11:49:00 Exporting Graph Data... I 11:49:00 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GSA-H21L_2.02_TUESDAY-JUNE-01-2010_11-42_AM_97m34s23f_1x.ibg I 11:49:00 Export Successfully Completed! I 11:49:00 Operation Successfully Completed! - Duration: 00:06:00 I 11:49:00 Average Write Rate: 606 KB/s (4.0x) - Maximum Write Rate: 640 KB/s (4.3x)
LIGHTNING UK! Posted June 1, 2010 Posted June 1, 2010 Do you actually have an i386 folder on that discs with ntldr in it? Does ImgBurn prompt you to correct any settings? I can't comment on 'Bart' stuff but the guide works fine with a real XP file set from a real XP install disc.
ianymaty Posted June 1, 2010 Posted June 1, 2010 You did not verify the burn, in conequence there are no guarantee it is 100% accurate. W 11:42:59 Write Speed Miscompare! - Wanted: 176 KB/s (1x), Got: 706 KB/s (4x) I 11:42:59 Destination Media Type: CD-RW (Disc ID: 97m34s23f, Mitsubishi Chemical Corp.) (Speeds: 10x) You wanted 1x ? Why? You got 4x, don't know how, since only available speed is 10x I don't know, but you not should get an already Bootable ISO out of PE Builder and than burn it with ImgBurn in Write mode?
Recommended Posts