dammit Posted June 1, 2010 Posted June 1, 2010 (edited) I'm having a problem when burning a double layer dvd disk... facts: -already used this image to burn a disc, everything was ok -burned another image on saturday, everything ok -didn't change anything on pc (software, nothing) -tried to burn same image again today (first one, not saturday's) -on the "writing lead-in stage (on the very beggining of operation), the device buffer doesn't fill, after some time it shows the message: Power Calibration Area Error -re-extracted image and tried to burn again, nothing -updated firmware, nothing -another media, nothing oBS: media is fine, i've burned several other images on the same media label, with no problems... I 17:20:10 ImgBurn Version 2.5.1.0 started! I 17:20:10 Microsoft Windows 7 Professional Edition (6.1, Build 7600) I 17:20:10 Total Physical Memory: 2.096.240 KB - Available: 1.396.200 KB I 17:20:10 Initialising SPTI... I 17:20:10 Searching for SCSI / ATAPI devices... I 17:20:10 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S202J SB03 (E:) (ATA) I 17:20:10 Found 1 DVD±RW/RAM! I 17:21:46 Operation Started! I 17:21:46 Source File: C:\Users\Henrique\Desktop\rdr.dvd I 17:21:46 Source File Sectors: 3.827.488 (MODE1/2048) I 17:21:46 Source File Size: 7.838.695.424 bytes I 17:21:46 Source File Volume Identifier: XGD2DVD_NTSC I 17:21:46 Source File Volume Set Identifier: 34672923 I 17:21:46 Source File Implementation Identifier: Sonic Scenarist 3.1 I 17:21:46 Source File File System(s): ISO9660; UDF (1.02) I 17:21:46 Destination Device: [0:1:0] TSSTcorp CDDVDW SH-S202J SB03 (E:) (ATA) I 17:21:46 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x) I 17:21:46 Destination Media Sectors: 3.827.520 I 17:21:46 Write Mode: DVD I 17:21:46 Write Type: DAO I 17:21:47 Write Speed: 4x I 17:21:47 Link Size: Auto I 17:21:47 Lock Volume: Yes I 17:21:47 Test Mode: No I 17:21:47 OPC: No I 17:21:47 BURN-Proof: Enabled I 17:21:47 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 17:21:47 Book Type Setting: DVD-ROM I 17:21:47 Optimal L0 Data Zone Capacity: 1.913.760 I 17:21:47 Optimal L0 Data Zone Method: Copied From Original Disc I 17:21:47 Set L0 Data Zone Capacity Succeeded! I 17:21:47 Filling Buffer... (40 MB) I 17:21:47 Writing LeadIn... W 17:22:28 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 17:22:28 Retrying (1 of 20)... W 17:22:29 Retry Failed - Reason: Power Calibration Area Error W 17:22:29 Retrying (2 of 20)... W 17:22:29 Retry Failed - Reason: Power Calibration Area Error W 17:22:29 Retrying (3 of 20)... W 17:22:29 Retry Failed - Reason: Power Calibration Area Error W 17:22:29 Retrying (4 of 20)... W 17:22:30 Retry Failed - Reason: Power Calibration Area Error W 17:22:30 Retrying (5 of 20)... W 17:22:30 Retry Failed - Reason: Power Calibration Area Error W 17:22:30 Retrying (6 of 20)... W 17:22:31 Retry Failed - Reason: Power Calibration Area Error W 17:22:31 Retrying (7 of 20)... W 17:22:31 Retry Failed - Reason: Power Calibration Area Error W 17:22:31 Retrying (8 of 20)... W 17:22:31 Retry Failed - Reason: Power Calibration Area Error W 17:22:31 Retrying (9 of 20)... W 17:22:32 Retry Failed - Reason: Power Calibration Area Error W 17:22:32 Retrying (10 of 20)... W 17:22:32 Retry Failed - Reason: Power Calibration Area Error W 17:22:32 Retrying (11 of 20)... W 17:22:32 Retry Failed - Reason: Power Calibration Area Error W 17:22:32 Retrying (12 of 20)... W 17:22:33 Retry Failed - Reason: Power Calibration Area Error W 17:22:33 Retrying (13 of 20)... W 17:22:33 Retry Failed - Reason: Power Calibration Area Error W 17:22:33 Retrying (14 of 20)... W 17:22:34 Retry Failed - Reason: Power Calibration Area Error W 17:22:34 Retrying (15 of 20)... W 17:22:34 Retry Failed - Reason: Power Calibration Area Error W 17:22:34 Retrying (16 of 20)... W 17:22:34 Retry Failed - Reason: Power Calibration Area Error W 17:22:34 Retrying (17 of 20)... W 17:22:35 Retry Failed - Reason: Power Calibration Area Error W 17:22:35 Retrying (18 of 20)... W 17:22:35 Retry Failed - Reason: Power Calibration Area Error W 17:22:35 Retrying (19 of 20)... W 17:22:35 Retry Failed - Reason: Power Calibration Area Error W 17:22:35 Retrying (20 of 20)... W 17:22:36 Retry Failed - Reason: Power Calibration Area Error W 17:22:39 Retrying (21)... W 17:22:39 Retry Failed - Reason: Power Calibration Area Error E 17:22:41 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 17:22:41 Synchronising Cache... W 17:22:44 User opted to skip the 'Close Track/Session/Disc' functions. E 17:22:44 Failed to Write Image! E 17:22:44 Operation Failed! - Duration: 00:00:57 I 17:22:44 Average Write Rate: N/A - Maximum Write Rate: N/A Edited June 1, 2010 by dammit
dammit Posted June 2, 2010 Author Posted June 2, 2010 http://forum.imgburn.com/index.php?showtopic=8000 I've already read it, and tried what that thread recommends, but the problem is still the same... Any other ideas?
Recommended Posts