dammit Posted June 1, 2010 Share Posted June 1, 2010 (edited) I'm having a problem when burning a double layer dvd disk... facts: -already used this image to burn a disc, everything was ok -burned another image on saturday, everything ok -didn't change anything on pc (software, nothing) -tried to burn same image again today (first one, not saturday's) -on the "writing lead-in stage (on the very beggining of operation), the device buffer doesn't fill, after some time it shows the message: Power Calibration Area Error -re-extracted image and tried to burn again, nothing -updated firmware, nothing -another media, nothing oBS: media is fine, i've burned several other images on the same media label, with no problems... I 17:20:10 ImgBurn Version 2.5.1.0 started! I 17:20:10 Microsoft Windows 7 Professional Edition (6.1, Build 7600) I 17:20:10 Total Physical Memory: 2.096.240 KB - Available: 1.396.200 KB I 17:20:10 Initialising SPTI... I 17:20:10 Searching for SCSI / ATAPI devices... I 17:20:10 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S202J SB03 (E:) (ATA) I 17:20:10 Found 1 DVD±RW/RAM! I 17:21:46 Operation Started! I 17:21:46 Source File: C:\Users\Henrique\Desktop\rdr.dvd I 17:21:46 Source File Sectors: 3.827.488 (MODE1/2048) I 17:21:46 Source File Size: 7.838.695.424 bytes I 17:21:46 Source File Volume Identifier: XGD2DVD_NTSC I 17:21:46 Source File Volume Set Identifier: 34672923 I 17:21:46 Source File Implementation Identifier: Sonic Scenarist 3.1 I 17:21:46 Source File File System(s): ISO9660; UDF (1.02) I 17:21:46 Destination Device: [0:1:0] TSSTcorp CDDVDW SH-S202J SB03 (E:) (ATA) I 17:21:46 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x) I 17:21:46 Destination Media Sectors: 3.827.520 I 17:21:46 Write Mode: DVD I 17:21:46 Write Type: DAO I 17:21:47 Write Speed: 4x I 17:21:47 Link Size: Auto I 17:21:47 Lock Volume: Yes I 17:21:47 Test Mode: No I 17:21:47 OPC: No I 17:21:47 BURN-Proof: Enabled I 17:21:47 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 17:21:47 Book Type Setting: DVD-ROM I 17:21:47 Optimal L0 Data Zone Capacity: 1.913.760 I 17:21:47 Optimal L0 Data Zone Method: Copied From Original Disc I 17:21:47 Set L0 Data Zone Capacity Succeeded! I 17:21:47 Filling Buffer... (40 MB) I 17:21:47 Writing LeadIn... W 17:22:28 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 17:22:28 Retrying (1 of 20)... W 17:22:29 Retry Failed - Reason: Power Calibration Area Error W 17:22:29 Retrying (2 of 20)... W 17:22:29 Retry Failed - Reason: Power Calibration Area Error W 17:22:29 Retrying (3 of 20)... W 17:22:29 Retry Failed - Reason: Power Calibration Area Error W 17:22:29 Retrying (4 of 20)... W 17:22:30 Retry Failed - Reason: Power Calibration Area Error W 17:22:30 Retrying (5 of 20)... W 17:22:30 Retry Failed - Reason: Power Calibration Area Error W 17:22:30 Retrying (6 of 20)... W 17:22:31 Retry Failed - Reason: Power Calibration Area Error W 17:22:31 Retrying (7 of 20)... W 17:22:31 Retry Failed - Reason: Power Calibration Area Error W 17:22:31 Retrying (8 of 20)... W 17:22:31 Retry Failed - Reason: Power Calibration Area Error W 17:22:31 Retrying (9 of 20)... W 17:22:32 Retry Failed - Reason: Power Calibration Area Error W 17:22:32 Retrying (10 of 20)... W 17:22:32 Retry Failed - Reason: Power Calibration Area Error W 17:22:32 Retrying (11 of 20)... W 17:22:32 Retry Failed - Reason: Power Calibration Area Error W 17:22:32 Retrying (12 of 20)... W 17:22:33 Retry Failed - Reason: Power Calibration Area Error W 17:22:33 Retrying (13 of 20)... W 17:22:33 Retry Failed - Reason: Power Calibration Area Error W 17:22:33 Retrying (14 of 20)... W 17:22:34 Retry Failed - Reason: Power Calibration Area Error W 17:22:34 Retrying (15 of 20)... W 17:22:34 Retry Failed - Reason: Power Calibration Area Error W 17:22:34 Retrying (16 of 20)... W 17:22:34 Retry Failed - Reason: Power Calibration Area Error W 17:22:34 Retrying (17 of 20)... W 17:22:35 Retry Failed - Reason: Power Calibration Area Error W 17:22:35 Retrying (18 of 20)... W 17:22:35 Retry Failed - Reason: Power Calibration Area Error W 17:22:35 Retrying (19 of 20)... W 17:22:35 Retry Failed - Reason: Power Calibration Area Error W 17:22:35 Retrying (20 of 20)... W 17:22:36 Retry Failed - Reason: Power Calibration Area Error W 17:22:39 Retrying (21)... W 17:22:39 Retry Failed - Reason: Power Calibration Area Error E 17:22:41 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 17:22:41 Synchronising Cache... W 17:22:44 User opted to skip the 'Close Track/Session/Disc' functions. E 17:22:44 Failed to Write Image! E 17:22:44 Operation Failed! - Duration: 00:00:57 I 17:22:44 Average Write Rate: N/A - Maximum Write Rate: N/A Edited June 1, 2010 by dammit Link to comment Share on other sites More sharing options...
mmalves Posted June 1, 2010 Share Posted June 1, 2010 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
dammit Posted June 2, 2010 Author Share Posted June 2, 2010 http://forum.imgburn.com/index.php?showtopic=8000 I've already read it, and tried what that thread recommends, but the problem is still the same... Any other ideas? Link to comment Share on other sites More sharing options...
Recommended Posts