Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

[ak47]

I try to burn the img but then it say "Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error"

I use Verbatim DVD+R DL

Whats is wrong!

CAN SOMEONE HELP ME PLEAS!!

 

LOG:

I 22:46:28 ImgBurn Version 2.5.1.0 started!

I 22:46:28 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 22:46:28 Total Physical Memory: 3.108.816 KB - Available: 1.605.076 KB

W 22:46:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 22:46:28 Initialising SPTI...

I 22:46:28 Searching for SCSI / ATAPI devices...

I 22:46:29 -> Drive 1 - Info: PIONEER DVD-RW DVRTD08A 1.50 (G:) (ATAPI)

I 22:46:29 -> Drive 2 - Info: BH2141R GEI817R 1.0 (E:) (SCSI)

I 22:46:29 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 22:46:57 Operation Started!

I 22:46:57 Source File: C:\Users\AK-47\Downloads\Red Dead Redemption [RF] [X360] [www.spatorrent.com]\rdr.dvd

I 22:46:57 Source File Sectors: 3.827.488 (MODE1/2048)

I 22:46:57 Source File Size: 7.838.695.424 bytes

I 22:46:57 Source File Volume Identifier: DVD_ROM

I 22:46:57 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 22:46:57 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:46:57 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:46:57 Source File File System(s): ISO9660; UDF (1.50)

I 22:46:57 Destination Device: [0:2:0] PIONEER DVD-RW DVRTD08A 1.50 (G:) (ATAPI)

I 22:46:57 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x)

I 22:46:57 Destination Media Sectors: 4.173.824

I 22:46:57 Write Mode: DVD

I 22:46:57 Write Type: DAO

I 22:46:57 Write Speed: 2,4x

I 22:46:57 Link Size: Auto

I 22:46:57 Lock Volume: Yes

I 22:46:57 Test Mode: No

I 22:46:57 OPC: No

I 22:46:57 BURN-Proof: Enabled

I 22:46:58 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x)

I 22:46:58 Advanced Settings - Optimal Writing Speed: No

I 22:46:58 User Specified L0 Data Zone Capacity: 1.913.760

W 22:47:17 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

W 22:47:17 Waiting for device to become ready...

[LIGHTNING UK!]

Try the other 'supported' write speeds.

 

Try cleaning the drive with a cleaning disc.

 

Check for firmware updates for the drive.

[ak47]

Try the other 'supported' write speeds.

 

Try cleaning the drive with a cleaning disc.

 

Check for firmware updates for the drive.

 

Thanks!!! I have cleaning my driver and now it works

THANK YOU