Bro Posted June 23, 2010 Posted June 23, 2010 I've seen other topics about this but they didn't contain any fixes. Could I please get some help? NOTE: The Error listed that indicates is 2x and not 2.4x is below W 12:35:59 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 2,770 KB/s (2x) Also, the disc I burned originally ran at 2x. Would it still be usable?
Bro Posted June 23, 2010 Author Posted June 23, 2010 I know how to but, most of the information is useless because everything else is normal except for W 12:23:23 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
mmalves Posted June 23, 2010 Posted June 23, 2010 If it was useless then I wouldn't be asking for it, would I?
Bro Posted June 23, 2010 Author Posted June 23, 2010 (edited) I 12:23:23 ImgBurn Version 2.5.1.0 started! I 12:23:23 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 12:23:23 Total Physical Memory: 3,143,592 KB - Available: 1,505,788 KB W 12:23:23 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:23:23 Initialising SPTI... I 12:23:23 Searching for SCSI / ATAPI devices... I 12:23:23 -> Drive 1 - Info: HL-DT-ST DVD-ROM GDRH10N 0D04 (E:) (ATAPI) I 12:23:23 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (F:) (ATAPI) I 12:23:23 -> Drive 3 - Info: WJCVOXI 8DIJ0HI3S 1.03 (K:) (SCSI) I 12:23:23 Found 1 DVD-ROM, 1 DVD±RW and 1 BD-ROM/HD DVD-ROM! I 12:35:59 Operation Started! I 12:35:59 Source File: D:\360 GAMES\PATCHED\Bayonetta [MULTI5][XBOX360][PAL][WwW.GamesTorrents.CoM]\swag-bayonetta.dvd I 12:35:59 Source File Sectors: 3,827,488 (MODE1/2048) I 12:35:59 Source File Size: 7,838,695,424 bytes I 12:35:59 Source File Volume Identifier: DVD_ROM I 12:35:59 Source File Volume Set Identifier: 356fc000MS UDFBridge I 12:35:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:35:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:35:59 Source File File System(s): ISO9660, UDF (1.50) I 12:35:59 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H653A D300 (F:) (ATAPI) I 12:35:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 12:35:59 Destination Media Sectors: 4,173,824 I 12:35:59 Write Mode: DVD I 12:35:59 Write Type: DAO I 12:35:59 Write Speed: 2.4x I 12:35:59 Link Size: Auto I 12:35:59 Lock Volume: Yes I 12:35:59 Test Mode: No I 12:35:59 OPC: No I 12:35:59 BURN-Proof: Enabled W 12:35:59 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 2,770 KB/s (2x) I 12:35:59 Book Type Setting: DVD-ROM I 12:35:59 Optimal L0 Data Zone Capacity: 1,913,760 I 12:35:59 Optimal L0 Data Zone Method: Copied From Original Disc I 12:36:04 Abort Request Acknowledged Edited June 23, 2010 by Bro
Cynthia Posted June 23, 2010 Posted June 23, 2010 There is a later firmware http://www.firmwarehq.com/Samsung/TS-H653A/files.html Not sure why you aborted the burn.
Bro Posted June 24, 2010 Author Posted June 24, 2010 Later firmware still burns at 2x. I aborted because, as I said earlier, I haven't modded my xbox and don't know if it matters if I burn at 2.4x or 2x or 4x. I'd rather not waste these disks, these disks are a lot of money
Bro Posted June 25, 2010 Author Posted June 25, 2010 (edited) ...No one decided to comment on the SPTD problem i fixed it, but it still doesn't go normal speed. It used to go up to 4x. Edited June 25, 2010 by Bro
Cynthia Posted June 25, 2010 Posted June 25, 2010 ...No one decided to comment on the SPTD problem i fixed it, but it still doesn't go normal speed. It used to go up to 4x. The SPTD issue only affects verify speeds and in most cases a Pioneer. I 12:35:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) 2.4x is the highest speed with that media.
Bro Posted June 26, 2010 Author Posted June 26, 2010 Yeah, but it won't go 2.4x. My computer used to burn very quickly.
Cynthia Posted June 26, 2010 Posted June 26, 2010 If it burns slower like 1x-2x it might be DMA issue. http://forum.imgburn.com/index.php?showtopic=59&view=findpost&p=967
Cynthia Posted June 26, 2010 Posted June 26, 2010 http://www.windowslifestyle.com/index.php/2010/04/turn-direct-memory-access-dma-on-or-off-in-windows-7/
Bro Posted June 26, 2010 Author Posted June 26, 2010 (edited) I don't have an IDE section... Hidden is disabled so that is everything http://img204.imageshack.us/img204/2425/ide.png Edited June 26, 2010 by Bro
mmalves Posted June 26, 2010 Posted June 26, 2010 Look in the Storage Controllers branch then. If you have an Intel controller then you should install this.
Recommended Posts